A modern take on a timeless classic.Built with sealed cartridge bearings and our 6D drive system.The ultra-dependable drive system of this hub uses 6 independently sprung, double tipped, reversed pawls; giving 12 point simultaneous engagement on a 30 click cro-mo drive ring32H forged and CNC alloy hub with a classic 'five-star' flange, built with sealed cartridge bearings and finished in polished silver. SpecificationsMaterial 7075 CNC body,Drillings 32H,Axle QR with alloy axle,Spoke Hole Circle Diameter (PCD) 58mm both sides,spoke hole size (diameter) 2.5mm,OLD Front : 100mm / Rear : 130mm,Colour High Polished Silver,Weight Front : 135g / Rear : 290g,Freehub 11spd Shimano/SRAM or Campag (rear).
The MXR Series of hubs have been built for BMX racing, and have won some of the most prestigious events around the globe.Wide spoke flanges make the MXR series build into some of the strongest and stiffest wheels in the market whilst sealed cartridge bearings ensure longevity.At a mere 155g our MXR Front hub is superlight for racing and yet strong enough for freestyle.The forged alloy body and 15mm hollow alloy axle optimise weight and strength, while minimising flex.There are two stock bolt configurations:28H or 32H for Race (with alloy capped Cr-Mo Allen bolts), ,36H for Dirt/Street/Park (with Cr-Mo Hex bolts),.(Note: the 2 bolt options can be purchased and interchanged, if using pegs we recommend the Cro-Mo Hex bolts).
Adapter kits to change Halo 6D Road Rear Disc hubs from 130mm OLD to 135mm OLD.Option A. Use to fit a 135mm Disc frame with standard 130mm spaced cranks.(Fits most crankset spacings).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +2.5mm symmetrical adaptor kit. (LH 2.5mm and RH 2.5mm cones). ,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Option B. Use to fit a 135mm Disc frame with 135mm specific spaced cranks.(Use with SRAM road 135mm cranksets with 2.5mm off-set).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +5mm asymmetrical adaptor kit. (LH 1 x 5mm cone, RH use Std cone)*.,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Note: : this option requires the wheel to be re-dished 2.5mm towards the non-drive side to ensure more equalised spoke tensionNote:In some circumstances, if using an MTB specific 10spd cassette in conjunction with a 135mm frame and a 130mm crank set-up (using the 2.5mm symmetric adaptor set) it is possible that you may encounter running difficulties in large sprocket to large chainwheel. This is due to a difference in cassette offset between Shimano MTB and Road 10spd sprockets. Fitting a Road-specific cassette will often solve the issue, or alternatively, switch to the asymmetric +5mm adaptor set and re-dish the wheel.
Lightweight racing hub with 6 pawl drive system.Smooth, quiet and reliable power transfer.The ultra-dependable drive system of this hub uses 6 reversed pawls, all independently sprung and featuring double tips, giving 12 engagement points on a 30 click Cr-Mo freehub driver.6D - Halo 6 Drive System:The ultra-dependable 6-Drive system: Smooth, quiet and reliable power transfer..6 reversed pawls, all independently sprung and featuring double tips, giving 12 point simultaneous engagement on a 30 click Cr-Mo drive ring powering the optional Cr-Mo or 7075chard alloy splined freehub body.This results in an extremely positive and reliable drive system.The uncluttered freehub that a reversed pawl system provides, allows a cartridge bearing to be used directly under the freehub drive ring (rather than an offset position that is commonly used in conventional pawl systems that cram the pawl mechanism into the relatively small diameter of the freehub itself.) The resultant reduction in offset torque transfer from the freehub reduces leverage effect on the axle and ultimately increases bearing durability. SpecificationsMaterial Forged and CNC machined,Drillings J-Bend, 24H (offset 16/8) or 32H (16/16),Bearings 2 x 6902, 2 x 15268,Axle 15mm alloy tube for 10mm QR,Spacing 130mm,Freehub Shimano/SRAM or Campag,Freehub Body 11 speed, Shimano or Campag,Drive System 6 Pawl, 30T engagement,Spoke Hole Circle Diameter (PCD) Left: 40mm, Right: 58mm,spoke hole size (diameter) 2.5mm,Centre to Flange Left: 41mm, Right: 15mm,OLD 130mm,Model Ref SM6S,Colour Black, Red or White with Red axle caps,Weight 275g.
Spacer enabling fitment of a rear wheel with a 10mm (3/8 inch) axle to a 14mm frame.Made of super hard wearing steel.
Replacement freehub for WL rear Road hub.HG 11 speed alloy 3 pawl freehub.
For the DJ connoisseur who would rather have the lateral wheel strength that wider spaced spoke flange set up can give, than have a disc mount.Sleek, weight saving purist design. With the wider flanges and no brake torque to worry about, you can run fewer spokes and save even more weight.20 x 110mm T-axle compatible with optional end cap and axle systems to allow regular QR, 15mm T-axle, 3/8 inch or 14mm nutted axle.(To change to nutted axles you will also need a Halo Spin Doctor QR Front Axle Kit HUHASDAQ as well as the appropriate Axe Men nutted stub axles.)
Combat Disc, Front - Forged and CNC alloy. Standard bearing. QR M9 axle, Front Disc hub with standard loose ball bearingsSpecificationsMaterial : CNC Aluminium,Drillings : 36H,Bearings : Loose Ball Bearings,Axle : QR,Spacing : 100mm,Disc Mount : 6 Bolt,Dimensions : C-L 22mm, C-R 35mm, Flange 58mm,Colour : Black,Weight : 260g.
Combat Rear Disc HubBlack anodised Combat looseball hubs. ,CNC machined alloy hub shells.,Standard loose ball ball bearings.,Quick Release axle..SpecificationsDrillings 36H,Bearings Loose Ball,Axle QR,Spacing 135mm,Disc Mount 6 Bolt,Centre to Flange C-L 34mm. C-R 19mm,Dimensions Flange dia 58mm,Colour Black,Weight 450g.
Halo SPIN DOCTOR MTB Rear;All purpose MTB sealed bearing rear cassette Disc hub.Light enough for Cross Country, rigid enough for Freeride, buff enough for DH.The Spin Doctor rear disc hub uses a bolt-on ball bearing cassette body with an integrated 3 pawl positive engagement drive. This places the 2 main hub sealed bearings on the outside of the hub (beyond the cassette body), providing superior axle support.The "outboard bearing" construction reduces axle flex and thus reduces bearing wear.When bolted together, the cassette and hub body become a strong, integrated unit, with 2 sealed cartridge main hub bearings and integrated Freehub looseball bearings.Sweeping shell styling and minimalist type International Disc mounts provide a beautiful looking, strong, light, rear MTB hub.Features;6061 Alloy CNC machined shell.,Shimano HG compatible cassette body.,International 6 bolt Disc Mounts.,Precision CNC Cr-Mo QR axle system.,Lightweight knurled alloy non-slip drop-out faces.,Bolt-On ball bearing integrated cassette body system.,Durable "Outboard" sealed cartridge bearings..Optional Extras;Saint type rear mech compatible axle option.,10mm Solid (nutted type BMX) axle kit option.,14mm Axle convertor kit to fit with 10mm Solid axle (converts to 10-14mm)..Compatibility;a) Quick Release 135mm. (included as standard - excludes QR skewers),b) Saint 135mm gear mech. (use optional extra Halo Saint axle kit),c) M10 x 135mm nutted (use optional extra Halo 10mm axle kit.),d) M14 x 135mm nutted (use optional Halo 10mm axle kit + 14mm axemen convertors).Note: Spin Doctor rear hubs cannot be used on any 12mm T-axle systems.SpecificationsMaterial 6061 Alloy,Drillings 32h, 36h or 48h,Bearings 6200 cartridge bearings,Spacing 135mm,Disc Mount 6 bolt,Dimensions C-L 34mm, C-R 19mm, flange 58mm,Model Ref S-DOC2,Colour Black,Weight 473g.
Halo announces perhaps the finest track hubs out there. custom machined with the distinctive Halo sweeping centre curved shape.Japanese sealed bearings.Hollow axle with Ti colour finish.C clip on both side of each sealed bearing.Hi-polish custom CNC machined hub shell, Alloy flush fit bearing cover and end cap.120mm spacing.Laser logo.32H, 36H or 48HDouble fixed or fixed/free options.C-L 31mm / C-R 31mmDiameter 62mm.Note: General Fixed cog check: for correct fixed use, the fixed cog should Never move on the hub when pedal force is applied in both directions. i.e. if the cog moves, then something is wrong. Continued use with a fixed cog that moves will result in damage to the hub.Important Note : Threads for "Fixed Cog Lockrings": Our hubs must only be used with ISO standard 1.29" x24TPi L/H fixed cog lockrings. Do Not Use French (1.32" x 24TPi) or Italian (33 x 1mm) standard lockrings. The larger diameter French and Italian lockrings may appear to work. but. will strip the threads from the ISO hub.
Replacement freehub for WL rear disc hub.HG 11 speed alloy 3 pawl freehub.