This Nukeproof Horizon Freehub Body is a genuine, high-quality replacement cassette body which is compatible with Shimano 9, 10 and 11-speed cassettes.
At 182mm long and coming Boost-sized for the most rambunctious off-road rides, it ensures a steady and stable roll when working in tandem with your hard-wearing rear hub.
Ideal for use with various moving parts on your bike, this bearing features internal balls and lifelong lubrication for smooth performance and low maintenance. Thanks to the bearing's rubber sealing it also stays dust and dirt-free, and so is suitable for a multitude of extreme conditions.
38.8mm outer diameter
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
This kit contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped, a step by step guide to do this can be found here.
This set contains four pawls and four springs, plus a plastic cover for the freehub.
This freehub body features a tough alloy construction, which makes it perfect for replacing your old or worn-out existing model. Suitable for use only on Nukeproof Horizon V2 hubs, this freehub body is designed for quick and easy installation. Options: · Shimano HG · Shimano Microspline · SRAM XD A new hub seal and bushing is supplied with Nukeproof freehubs. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap which can be bought here ( ) This freehub is only compatible with Nukeproof Horizon V2 hubs. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
These end caps can be used to convert your hub to a different spacing or replace a lost cap. Compatibility Chart & How to Fit End Caps Please click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.
These end caps can be used to convert your hub to a different spacing or replace a lost cap. This makes them perfect as a replacement or for riders who want to transform their hub set-up. Compatibility Chart & How to Fit End Caps Click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Horizon V2 hubs
A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
This rear axle is available in 142mm, 148mm and 150mm axle options. You will need to choose the correct axle to suit your hub spacing.