This freehub body features a tough alloy construction, which makes it perfect for replacing your old or worn-out existing model. Suitable for use only on Nukeproof Horizon V2 hubs, this freehub body is designed for quick and easy installation. Options: · Shimano HG · Shimano Microspline · SRAM XD A new hub seal and bushing is supplied with Nukeproof freehubs. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap which can be bought here ( ) This freehub is only compatible with Nukeproof Horizon V2 hubs. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
This set contains four pawls and four springs, plus a plastic cover for the freehub.
This kit contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped, a step by step guide to do this can be found here.
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
This Nukeproof Horizon Freehub Body is a genuine, high-quality replacement cassette body which is compatible with Shimano 9, 10 and 11-speed cassettes.
This lightweight alloy freehub body features a 30-Tooth ratchet that provides exceptional drivetrain strength and increased engagement, which supplies a superfast power-transfer and acceleration from rider to trail. High-Quality Nukeproof have fitted this freehub with two high-quality, sealed cartridge bearings inside the freehub and a low friction seal that sits between the freehub body and the hub bearings, this effectively eliminates bearing contamination from dirt, mud and water.
Part of the ABEC-5 line, these bearings are the revised LLU/LLB dual seal bearings. They place an LLU full contact seal on their outside facing surface, while the Inboard facing LLB medium contact seal allows for less drag. Their specific seal also increases their lifespan and offers exceptional performance. High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade. The Nukeproof Enduro 61805 ABEC5 V2 Hub Bearing Pair is only suitable for converting the front hub of the Nukeproof Horizon V2 and Neutron V2 from 15mm to 20mm axles. This bearing will also fit many other hubs that use this size of bearing. This superb bearing sets the benchmark for high precision bearings.
Nukeproof end caps are available for the Generator 3 in 1 hub so you have the option to choose the axle system that fits your bike. This allows easy conversion between all major axle sizes: - QR, 135mm x 12mm or 142 x 12mm.
Specifically designed for use on Nukeproof Neutron & Horizon v2 wheels, this 20g tub is perfect for using when it's time to service your wheel hubs. Apply to your pawls, springs and ratchet ring when servicing your hub to benefit from smooth and consistent performance. Instructions for full hub service can be found here.
Convert your Nukeproof hubs from 15mm to 9mm Quick Release with ease thanks to this Conversion kit.
This Nukeproof Horizon Freehub Body is a genuine, high-quality replacement XD Driver body which is compatible with SRAM 11 and 12-speed cassettes.
This chain tensioner kit includes genuine Nukeproof replacement tensioners for the Nukeproof Solum. Featuring a pair for drive and non-drive side, this set is needed to maintain the correct alignment of the rear hubs and chain tension in the Solum frame's single-speed horizonal drop-outs. These tensioners are specifically produced for the Nukeproof Solum and are not cross-compatible with other models and brands.