100% combed cotton T-Shirt with Doomed printed design. Pre-shrunk to minimise shrinkage. 200G / 5.9OZ
Ergon GA2 GripsDesigned with excellent ergonomics and an ultra-tactile feel, these Ergin GA2 Grips keep your hands and grip comfortable and painless over the most demanding of runs. Shaping to the contours of your hands on the exterior, the inside of the grip has a tapered inner core which protects further by dampening vibrations and bumps, letting you keep full control of your handlebars without worrying about blisters or unnecessary arm pump. Features: Lightweight composite inboard clamps 100% twist resistant Carbon bar friendly Lightweight composite inboard clamps Weight: 170g per pair Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GA3 Mountain Bike GripsIf you like to regularly hit the trails for day-long sessions, the trail-ready GA3 flat bar grips are the ideal addition to your mountain bike (MTB). Building on the success of Ergon’s popular GA2 model, these GA3 grips have increased ergonomic shaping and a miniature wing for increased wrist support. This design prevents pressure spikes and vibration pain on your hand’s carpal tunnel area, so your hands feel supported, giving you a more enjoyable and controlled ride without having to increase your gripping force. Available in a range of widths to suit your hand size, Ergon has also made a grip shift compatible model, for bikes that use SRAM XX1 Gripshift, Pinion, Nexus and Rohloff rear gear shifters.Features:Material: German-made soft and durable UV-Resistant Rubber Clamps: Carbon Fibre-friendly CNC Machined Aluminium, black anodised Diameter: 30mm Grip Sizes: Left: Standard; Right: Short Grip Lengths: Small: 92mm; Large: 102mm (On "Nexus/Rolhoff" version, this length applies only to the left grip) Use: Trail Riding, Cross-Country (XC), Touring Single or Pair: Pair A further development of the GA2 series, GA3 grips are more adapted to the hand, requiring less gripping forces Wing grip area relieves pressure on the hand's carpal tunnel areaWeight: 115g (pair) Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GA3 Mountain Bike GripsIf you like to regularly hit the trails for day-long sessions, the trail-ready GA3 flat bar grips are the ideal addition to your mountain bike (MTB). Building on the success of Ergon’s popular GA2 model, these GA3 grips have increased ergonomic shaping and a miniature wing for increased wrist support. This design prevents pressure spikes and vibration pain on your hand’s carpal tunnel area, so your hands feel supported, giving you a more enjoyable and controlled ride without having to increase your gripping force. Available in a range of widths to suit your hand size, Ergon has also made a grip shift compatible model, for bikes that use SRAM XX1 Gripshift, Pinion, Nexus and Rohloff rear gear shifters.Features:Material: German-made soft and durable UV-Resistant Rubber Clamps: Carbon Fibre-friendly CNC Machined Aluminium, black anodised Diameter: 30mm Grip Sizes: Left: Standard; Right: Short Grip Lengths: Small: 92mm; Large: 102mm (On "Nexus/Rolhoff" version, this length applies only to the left grip) Use: Trail Riding, Cross-Country (XC), Touring Single or Pair: Pair A further development of the GA2 series, GA3 grips are more adapted to the hand, requiring less gripping forces Wing grip area relieves pressure on the hand's carpal tunnel areaWeight: 115g (pair) Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Facing improves the alignment of bearings in the headset, The 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsets,Must be used with the 768 pilot to ensure the frame is reamed and faced accurately.
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.
Key Features:For use with the HTR-1 Head tube Reaming and Facing Set.,The 788 reams the headtube to an internal diameter at 43.95 mm to accept internal headset cups with 44.05 mm - 44.10 mm outer diameter (1-1/8 inch ZS standard)..
Park Tool Head Tube Reaming/Facing Set (HTR-HS)This tool is ideal for customising the actual setup that you require for your bike maintenance. This tool can be modified to face headsets and bottom brackets, press in bearings and headset cups or simply to ream a section of the frame which needs a little more clearance.Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards.Note that no reamers, facers or pilots are included with this set.Features:Park Tool part #: HTR-HSUniversally customisable tool for many usesCreate your own tool rather than having many different variants of the same designBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.
Proper frame preparation is very importantThe HTR-1B combines reaming and / or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8 mm reamer and four different size pilots (29.8 mm 30.0 mm 33.8 mm and 36.8 mm)The reamer is used to clean out or increase the diameter of the head tubeMost often facing of the head tube for good cup fit is the objective and no reaming is required in which case the pilots can be used in place of the reamersThe unique quick-release quick-adjust feature allows you to slide the bottom portion on and off easily without the long threading processThis threading function of the tool can still be fine tuned whilst in useThe tapered centring cone unit rides on a bearing for extra smooth operationAll cutting surfaces are top quality and extra sharp
Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards, or the tool can simply be used to ream a section of the frame which needs a little more clearance Note: No reamers, facers or pilots are included with this set.