Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.