This pair of Nukeproof Horizon V2 wheels comes equipped with the brand's extensively trailed and tested alloy blend, which includes a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this wheelset gives you the best of both worlds in terms of strength, stiffness and weight. Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub The Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future. The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in. A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres. By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split. Additional Item Top Features: Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant A full range of spares are available to service your hub in the future. 141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"
Nukeproof Sam Hill Horizon Oil Slick StemDeveloped alongside MTB legend Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Optimised to be lightweight and ultra-strong, this Sam Hill Signature model also comes equipped with Ti bolts and is finished off with Sam's signature logo laser-etched into it. The result is an eye-catching stem that's reliable and looks as awesome as it performs as you weave between the MTB trails at speed. This is the special edition oil slick colour version.Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The faceplate has also been designed specifically with "no gap" at the top to give it a clean look and to make the fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof Sam Hill Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athlete, Sam Hill, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions; Nukeproof has optimised this stem to be lightweight and ultra-strong.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the titanium steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The faceplate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.Features:Precision CNC-machined,Lazer etched Sam Hill logo,Titanium bolts,Opposing offset steerer clamp to give maximum thread contact,Knee-friendly steerer clamp design,Four-bolt front mount face plate,Bar Clamp: 31.8mm, 35mm,Steerer Diameter: 1 1/8",Length: 35mm, 50mm, 60mm,Rise: +/- 5mm,Stack Height: 35mm.
Nukeproof Sam Hill Horizon StemThe Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Nukeproof has optimised this stem to be lightweight and ultra-strong and this Sam Hill Signature version also comes with Ti bolts and is finished off with Sam's signature logo laser etched into it. Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm), 161g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Horizon StemThe Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Nukeproof has optimised this stem to be lightweight and ultra-strong and this Sam Hill Signature version also comes with Ti bolts and is finished off with Sam's signature logo laser etched into it. Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm), 161g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CNC-machined for high strength and low weight, this well-researched stem can be mounted either way, offering a 5mm bar height adjustability to let you customise your cockpits rise or fall by the same measurement. Giving maximum thread contact for the steerer bolts from its offset design, the stem keeps a smooth and efficient finish and feel having had its sharp edges removed. Featuring a laser-etched Sam Hill signature and Ti bolts, the sleek and stylish, modern performance is also augmented by having a "no gap" face plate at the top to give it a clean look and to make fitting assembly easier. tested to meet the demands of downhill racing and excitable Enduro riding, a confident and competent experience is assured. The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.
Classic, plated buckles provide a quality finish. Straps are supplied with instructions and include a full fitting kit with washers and screws. Buckles should be worn on the outside of the pedal. Restrap horizontal pedal straps provide remarkable strength and comfort. Made from tough nylon webbing, the straps are fully adjustable to suit all riders. Their unique 3-layer Velcro system holds your foot firmly in place for fast, tough cycling. No fittings required. Just fasten and go. Our straps can be worn with any footwear. Perfect for urban riding, bikepacking and touring.
Ribble Horizontal Dropout BoltThis replacement drop-out bolt ensures perfect alignment of the wheelset within horizontal dropouts of compatible framesets after removing the wheels for maintenance or transportation. Compatible with the following models.Ultra TT/TRI/TTR.Eliminator Track AL.Eliminator Carbon Track Bike.
SRAM GX DH 1x X-Horizon Rear MechThe SRAM GX DH 1x X-Horizon Rear Mech brings World championship winning technologies to the masses. Such technologies used to be reserved for SRAM's top-end models, but this is no longer the case. With the GX DH model, you can now use the same drivetrain performance that the pros enjoy at a more affordable price.Fast, Precise and Consistent ShiftingX-Actuation and X-Horizon technologies ensure ghost shifting and random jumps between the cassette cogs are a thing of the past, so you'll fly down the mountain in complete confidence.Features:Material: AluminiumMax Tooth: 28TDrivetrain Speed: 7-Speed onlyWeight: 263gTechnologies:Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into placeRoller Bearing Clutch: The Roller Bearing Clutch delivers maximum drivetrain stability even through the most punishing terrain. This stability benefits the drivetrain dramatically, as derailleur bounce and chain slap are eliminated without sacrificing precisionX-Actuation: Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire cassette.X-Horizon: The X-Horizon ‘straight parallelogram' design limits all movement on the horizontal axis, which makes ghost shifting impossible while also reducing shift force. The large upper pulley offset design maintains a constant chain gap across all gears and guarantees faster and more exact shifting.X-Sync: The X-Sync pulleys and chainrings tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. To provide the best possible performance in muddy conditions, the X-Sync jockey wheels have been designed with mud-clearing recesses for the inner chain links and rollers. The X-Sync jockey wheels are an integral part of the SRAM 1x drivetrains exceptional performance and efficiency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM NX X-HORIZON™ rear derailleur gives the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC™ pulley wheels. By eliminating unwanted chain movement, X-HORIZON™ shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with CAGE LOCK™ technology, wheel removal and installation are easier than ever.X-HORIZON™ design that reduces shift force, ghost shifting and chain slap,12-tooth X-SYNC™ pulley wheels,Fully compatible with all SRAM 1x™ drivetrains,Most affordable fully featured 1x rear derailleur in the industry.
Rugged and hardwearing thanks to its durable ripstop fabric construction, the Horizon Short from The North Face boast a cargo-inspired design and feature FlashDry™ technology, which makes them actively quick-drying and sweat-wicking. A gusseted crotch also aids mobility, while multiple pockets, some with Velcro® closures, provide plenty of storage options for valuables. Plus, a Durable Water-Repellent (DWR) finish and ultraviolet UPF 50 protection keeps excess water and harmful rays at bay.
Horizon ShortIf you enjoy taking to the outdoors in sweat-inducing climates, then The North Face's Horizon Short are a fail-safe option for staying cool, dry and protected.Rugged and hardwearing thanks to its durable ripstop fabric construction, the Horizon Short from The North Face boast a cargo-inspired design and feature FlashDry™ technology, which makes them actively quick-drying and sweat-wicking. A gusseted crotch also aids mobility, while multiple pockets, some with Velcro® closures, provide plenty of storage options for valuables. Plus, a Durable Water-Repellent (DWR) finish and ultraviolet UPF 50 protection keeps excess water and harmful rays at bay.Features:Lightweight, breathable, abrasion-resistant 100% nylon ripstopFlashDry™ technologyFixed waist with belt loops2 front open hand pockets2 large cargo pockets with Velcro® closure1 back pocket with Velcro® closureCrotch gusset for improved mobilityDurable Water-Repellent (DWR) finishUltraviolet protection factor UPF 50Buy The North Face from Chain Reaction Cycles, the World's Largest Online Bike Store.