Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub AssemblyWith a 44 tooth engagement from its 4-pawl ratchet design, this genuine Hope replacement Pro 4 freehub gives you almost instant pedal response as take off. Making the most of every acceleration burst, it also spins on smooth rolling cartridge bearings. These stainless steel bearings are fully sealed for reliable and consistent performance in all conditions.Features: Genuine replacement part Compatible with Hope Pro 4 rear hubs only Designed, tested and manufactured by Hope in its Barnoldswick plant 4 pawl ratchet with 44 tooth engagement (8.2°) Sealed stainless steel cartridge bearings Please Note: The images for the HUB538 models should be used as a guide only. A black or silver colour may be sent Included: Freehub with sealed bearings and 4 pawls installed Weight: 82g (approx)Specifications: HUB537 (XX1/XD): For use with SRAM XD (11 Speed) Cassette only (*Excluding PG-1130 and PG-1230) HUB536 (11 Speed - Aluminium): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB540 (11 Speed - Steel): For use with Shimano 9/10/11 speed or SRAM 9/10 speed Cassette (*Including PG-1130 and PG-1230) HUB538-QR (QR - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-10 (10mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-12 (12mm - Aluminium): Hope mountain bike (MTB) cassettes only HUB538-X12 - (X12 - Aluminium): Hope mountain bike (MTB) cassettes only HUB545-QR (QR - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside QR cap) HUB545-12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside 12mm cap) HUB545-x12 (12mm - Aluminium): For use with Shimano MicroSpline Cassette only (supplied with specific Driveside X12 cap)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Freehub Pawl (Set of Four)A genuine replacement part, this Pro 4 Freehub Pawl Set from Hope is suitable for mountain bikes (MTB), with reliable quality in mind. Made for use with Hope Pro 4 Pawl hubs, this comes as a set of four.Features:Use: Mountain Bike (MTB)Genuine replacement partFor 4 Pawl hubsCompatibility: Hope Pro 4 Pawl hubsBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Disc Brake Mount AdaptersReplacement Hope disc brake adaptor, with multiple options allowing you to convert either Post mount, IS mount or Flat mount brakes to suit different size rotors.Please note: Bolts can be black or silverMaterial: AluminiumBrake Type: disc BrakeNote: PM – Post Mount, IS – International Standard Mount, FM – Flat Mount
Hope Kids F12 Flat Mountain Bike PedalsThe Hope Kids F12 Pedals are designed with children and small feet riders in mind. Featuring the same internals, high-quality construction and awesome performance as the top-level Hope F20 pedal, but with a smaller platform size. Featuring a special profiled platform surface that provides an extremely grippy but less aggressive surface compared to F20 pedal, the fully adjustable pins can also be removed if they are not required for the riding style.Features: Material: Platform: CNC 2014 T6 Aluminium; Axle: Heat-Treated CrMo Bushing: Norglide bushing Bearings: 3x cartridge bearings, fully sealed chamber for long smooth life-span Use: Suitable for all agesBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Oval Retainer MTB Chain RingHope's Oval Retainer Ring helps to smooth out your pedalling action and make those extended climbs to the top of the trails less painful. Also, when you're on the way back down again, you'll enjoy excellent chain retention thanks to its narrow/wide tooth profile. When used along with a clutch style rear mech, you don't need a chainguide, so overall weight is reduced and your drivetrain runs quieter and with less drag.The Oval Retainer chainring is CNC machined from 7075-T6 aluminium and provides the perfect blend of low weight and strength. It's compatible with 9, 10, and 11-Speed set ups and has a hard anodised finish, which makes it ultra durable.Features: Material: CNC machined 7075-T6 Aluminium Bolt Circle (BCD): 104mm 4 bolt pattern 12% Ovality and 113 degree clocking Narrow/wide tooth profile means no need to run a chain device Designed to work with conventional 9, 10 or 11-Speed set ups Weight: From 41g (32T)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Hope Tech 4 E4 Brake - No RotorDeveloped for reliable, consistent braking operation, this hydraulic disc brake is ideal for competing in an enduro event or for riders who want a more confident, performance-orientated braking setup for their trail riding adventures. It features a more ergonomical lever shape that's designed to provide the best mechanical advantage during braking. Another highlight is its increased power when compared to its predecessor the Tech 3, which allows it to offer a 30% pressure increase.Race Ready Hydraulic Disc BrakeThe Tech 4 E4 builds on Hope's 25+ years' experience designing and manufacturing hydraulic brake systems. The Tech 4 uses updated internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping the legendary feel and modulation. The updated E4 caliper utilises hybrid-style stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.Tool-Free Reach AdjustDesigned for simplicity, Hope has kitted out this mountain bike (MTB) hydraulic disc brake with a tool-free reach adjustment and bite point. This means that you can easily fine-tune the distance between the lever blade and your handlebar for a more customised braking feel that matches your hand size as well as your riding style. Coming complete with a range of performance-enhancing technologies, the Hope Tech 4 E4 Brake - No Rotor is a perfect upgrade for powerful and consistent braking performance, wherever your next ride takes you.Features: Use: Mountain Bike (MTB), Enduro Type: Hydraulic disc brake Adjustable Lever Reach and Bite Point: Yes, tool-free Increased power versus Tech 3 Hinged clamp reducing weight and ergonomics Shifter integration improved for more adjustability Hybrid piston design; Rigid CNC'd one piece caliper Compatible with a wider range of current shifter options Rotors Included: No, available separately Single or Pair: SingleTechnologies: 30% pressure increase compared with the Tech 3 brake. Hinged clamp design to reduce weight and reservoir area increased to lower overall stack height. Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3. All Tech 4 brakes are supplied with new racing compound pads.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Hope Tech 4 E4 Brake - No RotorDeveloped for reliable, consistent braking operation, this hydraulic disc brake is ideal for competing in an enduro event or for riders who want a more confident, performance-orientated braking setup for their trail riding adventures. It features a more ergonomical lever shape that's designed to provide the best mechanical advantage during braking. Another highlight is its increased power when compared to its predecessor the Tech 3, which allows it to offer a 30% pressure increase.Race Ready Hydraulic Disc BrakeThe Tech 4 E4 builds on Hope's 25+ years' experience designing and manufacturing hydraulic brake systems. The Tech 4 uses updated internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping the legendary feel and modulation. The updated E4 caliper utilises hybrid-style stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.Tool-Free Reach AdjustDesigned for simplicity, Hope has kitted out this mountain bike (MTB) hydraulic disc brake with a tool-free reach adjustment and bite point. This means that you can easily fine-tune the distance between the lever blade and your handlebar for a more customised braking feel that matches your hand size as well as your riding style. Coming complete with a range of performance-enhancing technologies, the Hope Tech 4 E4 Brake - No Rotor is a perfect upgrade for powerful and consistent braking performance, wherever your next ride takes you.Features: Use: Mountain Bike (MTB), Enduro Type: Hydraulic disc brake Adjustable Lever Reach and Bite Point: Yes, tool-free Increased power versus Tech 3 Hinged clamp reducing weight and ergonomics Shifter integration improved for more adjustability Hybrid piston design; Rigid CNC'd one piece caliper Compatible with a wider range of current shifter options Rotors Included: No, available separately Single or Pair: SingleTechnologies: 30% pressure increase compared with the Tech 3 brake. Hinged clamp design to reduce weight and reservoir area increased to lower overall stack height. Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3. All Tech 4 brakes are supplied with new racing compound pads.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Hope Tech 4 E4 Brake - No RotorDeveloped for reliable, consistent braking operation, this hydraulic disc brake is ideal for competing in an enduro event or for riders who want a more confident, performance-orientated braking setup for their trail riding adventures. It features a more ergonomical lever shape that's designed to provide the best mechanical advantage during braking. Another highlight is its increased power when compared to its predecessor the Tech 3, which allows it to offer a 30% pressure increase.Race Ready Hydraulic Disc BrakeThe Tech 4 E4 builds on Hope's 25+ years' experience designing and manufacturing hydraulic brake systems. The Tech 4 uses updated internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping the legendary feel and modulation. The updated E4 caliper utilises hybrid-style stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use.Tool-Free Reach AdjustDesigned for simplicity, Hope has kitted out this mountain bike (MTB) hydraulic disc brake with a tool-free reach adjustment and bite point. This means that you can easily fine-tune the distance between the lever blade and your handlebar for a more customised braking feel that matches your hand size as well as your riding style. Coming complete with a range of performance-enhancing technologies, the Hope Tech 4 E4 Brake - No Rotor is a perfect upgrade for powerful and consistent braking performance, wherever your next ride takes you.Features: Use: Mountain Bike (MTB), Enduro Type: Hydraulic disc brake Adjustable Lever Reach and Bite Point: Yes, tool-free Increased power versus Tech 3 Hinged clamp reducing weight and ergonomics Shifter integration improved for more adjustability Hybrid piston design; Rigid CNC'd one piece caliper Compatible with a wider range of current shifter options Rotors Included: No, available separately Single or Pair: SingleTechnologies: 30% pressure increase compared with the Tech 3 brake. Hinged clamp design to reduce weight and reservoir area increased to lower overall stack height. Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master cylinder is also possible to give a wide range of lever position options. Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3. All Tech 4 brakes are supplied with new racing compound pads.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.