Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Made from high quality 316 Stainless steel the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft to clean out punctures before plugging and to be as slim as possible so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid you shouldn't have any issues gripping the tool even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. Features Available in 12x Chris King colours. Quick and easy to insert tyre plugs. With our unique single-sided fork design you simply push and roll the plug into the hook of the fork. With no tight gap to squeeze through the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there. Fork made from 316 stainless steel. Body made from anodised 6061 aluminium. Knurled body and ribbed lid / handle for extra grip. Weather sealing o-rings make the tool waterproof when assembled. Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.
Developed alongside World Cup mechanics and world champion racers. Peaty's Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won't ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm.Key FeaturesBiodegradable sealing fibres.,Biodegradable platelets.,CO2 compatible.,Seals up to 6mm holes.,Operating pressures: 15 to 120 psi.,Operating temperature: -20°c to +50°c.,Seals porous tyres and bead/rim gaps setup..Setup Instructions:Always ensure you have tubeless ready rims and tyres. For best results use with Peaty's Tubeless Rim Tape and Peaty's Tubeless Valves.1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles.,2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants.,3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim.,4. Deflate the tyre and, with the valve at the three o'clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve.,5. Re-insert the valve core and re-inflate the tyre to desired pressure.,6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor.,7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can't hear any more air loss.,8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water.,9. Check tyre pressures and ride!.Recommended minimum quantities per tyre:Road 30 - 45ml,CycloCross 60 - 75ml,26" MTB 60 - 80ml,27.5" MTB 70 - 90ml,29" MTB 100 - 120ml.For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities.* Always check sealant regularly and top up as required† If a seal can't be made, add more sealant in increments as required
Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.Key FeaturesAvailable in 12x Chris King colours.,Unique Patent Pending compact straightline design for maximum airflow.,Simply push down to inflate.,Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.,Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve..
Key Features:5 x threaded co2 cartridges per pack,Including 1 freeze protector sleeve with unique closed base design,Packaged using recycled cardbaord header cards and biodegradable bags.
Key Features:5 x threaded co2 cartridges per pack,Including 1 freeze protector sleeve with unique closed base design,Packaged using recycled cardbaord header cards and biodegradable bags.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.Key Features:Available in 12x Chris King colours.,Unique Patent Pending compact straightline design for maximum airflow.,Simply push down to inflate.,Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.,Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve..
Key Features:Available in 1.5mm & 3mm plug sizes.,6 plugs per pack, in 2 sheets of 3 plugs,Designed to fit perfectly into the body of peaty’s holeshot tubeless puncture plugger tool,Packaged using recycled cardbaord header cards and biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.Key FeaturesAvailable in 12x Chris King colours.,Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.,With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.,Fork made from 316 stainless steel.,Body made from anodised 6061 aluminium.,Knurled body and ribbed lid / handle for extra grip.,Weather sealing o-rings make the tool waterproof when assembled.,Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs..
Reach for the TLD Holeshot Pullover Hoodie before you head out the door on those cool early mornings.