Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Key Features:5 x threaded co2 cartridges per pack,Including 1 freeze protector sleeve with unique closed base design,Packaged using recycled cardbaord header cards and biodegradable bags.
Shimano Tiagra RS400 Front Hub The Shimano Tiagra RS400 Front Hub is an extremely durable and reliable compatible front hub for Road cyclists. Seals help to prevent water and dirt ingress for incredible performance in all weather conditions.Features: Like those at the top-of-the-range, RS400 Tiagra level Road hubs feature labyrinth and contact seals to prevent the ingress of corrosion-causing dirt and water Internal grease sleeve increases durability and reduces service intervals The hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions; they also offer precision bearing adjustment and easy maintenance Anodised aluminium hub shell Comes complete with QR skewerA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Deore Disc Hub Front M525ABorozon Treated Races: Diamond polished bearing races provide ultra-smooth bearing action.Features:Disc Brake Compatible: yesOver Locknut: 100mmAxle Length: 108mmAxle Diameter & Material: 9mm steelQR Lever aluminumCone Races BorozonCup Races barrel polishedContact Sealing doubleSpoke Holes 36/32 holesSpoke Hole Circle 61mmHub Shell aluminum/annodizedCenter to Flange - Right 21.1Center to Flange - Left 31.7A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Box Two Chain Tensioners let you dial in your chain tension so it's just right. Two mounting holes provide room for ample adjustment on most frames. When used properly, Box Two Chain Tensioners help protect frame dropouts and keep your rear wheels locked in place where they should be. For use with 10mm axles only.
Cleat adapter that enables the attachment of all 2 bolt SPD cleats onto a 3 or 5 hole road shoe.Acts as a pontoon when using SPD cleats on SPD-SL soles
A good value disc-compatible front hubStandard six-bolt disc rotor fitting - ideal for Shimano hydraulic or mechanical disc brake systemsRubber contact seals help prevent rust-causing water and mud reaching hub bearingsLight alloy quick release includedAvailable in 32 and 36 hole drillings
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Made from high quality 316 Stainless steel the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft to clean out punctures before plugging and to be as slim as possible so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid you shouldn't have any issues gripping the tool even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. Features Available in 12x Chris King colours. Quick and easy to insert tyre plugs. With our unique single-sided fork design you simply push and roll the plug into the hook of the fork. With no tight gap to squeeze through the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there. Fork made from 316 stainless steel. Body made from anodised 6061 aluminium. Knurled body and ribbed lid / handle for extra grip. Weather sealing o-rings make the tool waterproof when assembled. Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.
This is a refill pack for the Peaty s Holeshot CO2 MTB Tyre inflator. It contains five 25g CO2 cartridges per pack and includes 1 freeze protector sleeve.25g Cartridges for MTB / 16g Cartridges for Road & Gravel5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base designPackaged using recycled cardboard header cards and biodegradable bags