Shimano Di2 BCR2 Charger for BTR2 BatteryAn essential component for maintaining your Shimano Di2 electronic drivetrain system, the Di2 BCR2 Charger is compatible with Shimano’s SM-BTR2, BT-DN110 internal batteries. Simple to use, it connects your Di2’s handlebar junction, so there is no need to remove the battery from the bike for charging. This charger can also be connected to your PC via USB for software updates and customisation.Features: Battery charger for SM-BTR2, BT-DN110 and BT-DN110-A Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger 1.5 hour charge time Includes SM-BCR2 charging cable Plugs in directly to the SM-EW90 handlebar junction A PC linkage device for E-Tube Project to update firmware and customize settings Plug lead not includedA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Shimano Di2 Bluetooth frame or bar plug mount allows you to charge and check the battery level of your Shimano Di2 electronic shifting system. Thanks to its Bluetooth-compatible design (Bluetooth module available separately), you can easily connect to your Shimano Di2 to change shift modes such as manual shift, synchronized shift 1 and synchronized shift 2. Its built-in LED lights will illuminate to indicate the mode you have selected by a green or red light system. If your bike receives a strong impact, the rear derailleur (RD) protection function kicks in and the connection between your motor and the link is momentarily severed so that the rear derailleur will no longer operate. This is done in order to protect the system at times such as if the bike falls over. The Shimano Di2 junction box allows you to press the button on junction (A) to restore the connection between the motor and the link and to clear the RD Protection function for the rear derailleur. To top it off, this handy device features water-resistant connectors so you can keep your Di2 running in peak performance, whatever the weather conditions. Please note: You need the additional Bluetooth module Shimano SM-EWWU111 to enable Bluetooth. This Shimano SM-EWWU111 unit allows you to connect to a Bluetooth device once installed however, the EW-RS910 alone does not allow for this functionality and would work in tandem with the Shimano SM-EWWU111.
This Shimano Di2 cable is required to connect the junction (either SM-JC40 external or SM-JC41 internal - sold separately) to the shifters, rear derailleur, front derailleur, battery and to the handlebar battery indicator junction box. In an Ultegra Di2 system, there is a fully removable individual Shimano Di2 E-Tube cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching but provides effortless gear shifts.
Shimano Di2 EW-RS910 E-Tube Frame Bar Plug MountThis E-Tube Frame Bar Plug Mount has been engineered for seamless and efficient charging of your Shimano Di2 groupset. It's also Bluetooth compatible (Bluetooth module available separately), so you can connect to your groupset using your smartphone to make changes to shift models.As an added bonus, its built-in LED lights will illuminate to indicate the mode you've selected by a green or red-light system. Finally, this handy device features water-resistant connectors, so you can keep your Di2 running in peak performance in any weather conditions.Please note: You need the additional Bluetooth module Shimano SM-EWWU111 to enable Bluetooth. This Shimano SM-EWWU111 unit allows you to connect to a Bluetooth device once installed however, the EW-RS910 alone does not allow for this functionality and would work in tandem with the Shimano SM-EWWU111.Features: LED window for battery level indication LED window for the button Shift Mode selection RD Protection function Bluetooth connection for using with your smartphone/tablet (Please note: You will need an additional Bluetooth module Shimano SM-EWWU111 to enable Bluetooth which is sold separately) Water-resistant connectors Charging Port Use: Cyclocross, Mountain BikeA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dura-Ace Di2 (Dual Integrated Intelligence) moves to the next generation. Tested in competition and taken to victory by pro riders in all conditions, including the 2012 Tour de France Team Sky. Shimano EW-SD50 wire for Di2 systems. Key Features: EW-SD50 Di2 electric wire. Fully removable individual cable system from battery indicator junction box that enables fine tuning with the correct length to each component. EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. Available in varying lengths so there is no need to cut the cables. Secure water resistant connectors.
Dura-Ace Di2 (Dual Integrated Intelligence) moves to the next generation. Tested in competition and taken to victory by pro riders in all conditions, including the 2012 Tour de France Team Sky. Shimano EW-SD50 wire for Di2 systems. Key Features: EW-SD50 Di2 electric wire. Fully removable individual cable system from battery indicator junction box that enables fine tuning with the correct length to each component. EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. Available in varying lengths so there is no need to cut the cables. Secure water resistant connectors.
Key Features: E-tube Di2 D-FLY inline data transmission wireless unit Allows information to be sent wirelessly via ANT private network to compatible cycle computers Information can be displayed about gear position and Di2 battery level Clean integration and installation with E-tube system Internal chip enables system wireless functionality of Bluetooth components Plug tool required for inserting and removing E-tube Di2 wires Average weight 5 grams
Shimano Di2 EW90 Junction-A Box (3 Port)Say goodbye to poor shifting control, thanks to the Junction-A Box from Shimano. Mounting seamlessly to your bike stem, thanks to the mounting strap included, it connects with E-Tube wires from D12 shifters and a downtube junction wire.Features:This junction A is required to connect the shifters via E-tube wires to the downtube junction wire3-port design, one for downtube wire to bottom bracket junction, two for shifter connectionBattery level indicator featureE-tube EW-SD50 wires not includedAdditional charging point when using the internal batteryGear index setup switch to allow fine-tuning via shifter buttonsReliable and secure water-resistant connectorsStem mounting strap includedCompatible Systems: E-TubeWeight: 10g (approx.)Part No: SM-EW90-AA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dura-Ace Di2 (Dual Integrated Intelligence) moves to the next generation. Tested in competition and taken to victory by pro riders in all conditions, including the 2012 Tour de France Team Sky. Keep your internal battery charged up with this Di2 unit. Key Features: Dura-Ace Di2 charger that will keep your Di2 system shifting. Dura-Ace Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger. LED indicator lights. 1.5 hour charge time. Does not include a power lead.
The Shimano Dura-Ace Di2 (Dual Integrated Intelligence) is the next generation of junction boxes. Put to the test in competition and used in victories by pro riders in every condition, including the 2012 Tour de France Team Sky. The under-stem Junction Box A is versatile with the multiple shifters. Mount the Junction Box A under the stem with the included rubber harness and can be used with the 9070 setup with multiple shifters. The EW90-A 3 Port Junction Box is designed for a standard drop-handlebar with both STI and Sprinter shifters. Key Features: Shimano Di2 EW90-A 3-port junction box Designed for use with drop handlebars Allows you to use both STI and Sprinter shifters for excellent versatility Cables sold separately
Dura-Ace Di2 (Dual Integrated Intelligence) moves to the next generation. Tested in competition and taken to victory by pro riders in all conditions, including the 2012 Tour de France Team Sky. SM-JC41 cable junction for internal wire routing. Key Features: Required for connection of the rear mech, front mech, battery and cable to battery indicator junction box. Positions inside your frame. Water resistant. Cables sold separately.
With Shimano's display unit it is easier than ever to keep track of your every move on the trail and insure your Di2 system is exactly where you want it for the trail ahead.With a quick glance you can monitor your Di2 data such as battery life, gear selection and shift mode.With the ever expanding E-tube platform the display also allows you to view your Fox suspension position, whether you are in climb, trail or descend mode you will always be prepared for the trail ahead.Key Features:Customized Synchro-shift modes can be selected between S1, S2 and Manual on the fly by using the mode button.Can be connected wirelessly enabling adjusting of the multi-shift speed and SYNCHRO SHIFT operation via computer, tablet or smart phone.Audible shift notification tone when in Synchro-shift mode, alerting you the front derailleur is about to shift.Easy access adjustment mode button means fine tuning front and rear derailleurs becomes effortless.Replaces Junction A function with internal battery charging port.Comes with 3 E-tube wiring ports.Compatible with 35mm and 31.8mm handlebar diameters.