The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
Peaty's LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. The unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain. Wax is the best lubricant for dry conditions because, when applied correctly, it will fill your links and rollers with a hard, slippery coating, which will last for ages on the trails and is dry to the touch - so dry dirt and dust will not stick to it. If you want a top-performing lube for dry conditions, check out Peaty's LinkLube Dry!
Peaty s LinkLube Wet weather chain lube is a bespoke blend of oils, waxes & powerful corrosion inhibitors that will give you a super smooth, hyper-durable, quiet running chain in the wettest and filthiest riding conditions.Readily biodegradableBlend of wax and oilsIrish coffee scented to keep you going on long winter nightsDesigned for long rides in wet, filthy conditionsSmoked black bottle visually differentiate from the rest of the rangeAvailable in 15ml, 60ml and 120mlLinkLube Wet is a higher viscosity blend of waxes and oils with a higher concentration of waxes and corrosion inhibitors compared to LinkLube All-Weather. The high wax concentration makes LinkLube Wet much quieter and smoother running, whilst also lasting much longer than LinkLube All-Weather on long rides in the wettest conditions.
This new version of the Butt Fender is designed for us on Fat Bikes and stops you getting that cold, damp and chaffed feeling downstairs! It joins the already established Bender Fender range, using the same technology and materials, to give you all the same benefits but this time provide rear protection! It attaches to the saddle rails, needing no additional fasteners and extends over the back wheel, protecting the rider against 'soggy arse syndrome'. So if you're prone to this problem and are looking for a lightweight, minimalist solution, look no further!
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
Introducing Dynaplug s most popular plug, suitable for almost all Dynaplug tools, except the road version of the Air system.No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMade with pride in the USA using patented technologyDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
Fitness-Mad Speed Rope (10 feet)Great for helping you to stay fit at the home and at the gym, the Fitness-Mad Speed Rope is a great way to aerobically train. The skipping rope is made with durable solid vinyl cord with free-spinning, easy grip low density shatterproof polyethylene handles.FeaturesBest suited to heights over 5ft 11’’A high quality, smooth-turning speed skipping ropeRecommended for general purpose skippingMade of solid vinyl cordFree-spinning, easy grip low density shatterproof polyethylene handlesBuy Fitness-Mad Training Aids from Chain Reaction Cycles, the World's Largest Online Bike Store.
QR Seatpost Bracket for the Blaze Rear Light. Fastens to seat post using silicon band, will generally fit any size seatpost.
QR Seat post mount bracket for TraceR light only. Fastens using a silicon band, allows fitment to almost all seat posts sizes.
Bracket and Rubber Strap. Available for Flash or Flare.The QR Mount for the Trace is a one size fits all quick release mount. The silicone band securely attaches the bracket to the handlebar for safe secure fitment..
This saddle rail bracket is designed to be used with the Exposure Lights Flare and will fit any standard rail design saddle
The perfect addition to your Safe-it protective sleeve in sizes S to XXL. The attachment set allows you to quickly attach your mobile devices and maps in their cozy waterproof sleeves to any Ultimate handlebar bag (except for the Ultimate Compact). The set consists of four hooks and adjustable elastic cords. A smart solution ready for any weather and terrain!
For all Water-Bag Water-Sack and Water-Belt models from 1999Spare valve DETAILS: + 1 smart valve
For 11 and 16.5-liter Seat-Packs. You can use these support straps to give your Seat-Pack additional security and fixation on the bike. The straps additionally support the bag and prevent the bag from sinking when the load is distributed unfavourably. CONTENT: 1x support strap More Information COLOR orange MATERIAL nylon BAG TYPE single ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 24 g | 0.8 oz HEIGHT 108 cm | 42 inch PROPERTIES mig nopvc
iXS Kid's Carve GlovesThe Kid's Carve Gloves from iXS give junior mountain bikers the confident grip and comfort they need to keep pushing the limits of their MTB skills.Made with a pre-formed ergonomic shape, the Kid's Carve MTB Gloves provide a natural grip of the bars. A slim but abrasion-resistant palm gives great terrain feedback and offers protection should they take a fall. The slip-on design reduces bulk while the reinforced fingertips give a healthy boost to durability and lifespan. With touchscreen compatibility, there's also no need to remove the gloves when using a smartphone.Features:Pre-formed ergonomicsSlip-on designStretchAbrasion-resistant synthetic palmReinforced fingertipsCapacitive touch functionBuy iXS Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
An easy to mount design for Exposure Trace lights, this Exposure Lights mount quickly attaches to regular round seatposts with ease and securely holds your Exposure Blaze light in place. Not compatible with some aero seatposts. Includes bracket and rubber band.
This saddle rail bracket is designed to be used with the BOOST-R rear light; this product will fit any standard rail design saddle.Product Compatibility: BOOST-R DB, Boost-R ReAKT
An essential for any runner to stay hydrated, the Ultimate Direction Flexform II 500 Bottle has been made with a BPA-free Polyurethane and features a 500ml volume with handy millilitre markers at the back.
The pre-formed ergonomics of the Kid's Carve Gloves ensure a natural grip of the bars and paired with the abrasion-resistant synthetic palm keeps young riders confidently in control of their bike. The slip-on design reduces bulk while the reinforced fingertips give a healthy boost to durability and lifespan. With touchscreen compatibility, there's no need to remove the gloves when using a smartphone.