The Bora WTO 45 stands out amongst the current line-up for its extreme versatility. While certainly not the only element in an efficient wheel, the rim is certainly the largest component in the build and as a result the recipient of a great deal of attention in terms of development. The Campagnolo carbon fibre Bora WTO rims represent the maximum in terms of not only aerodynamic profile design but versatile aerodynamic design. If a wheel is to provide greater aero efficiency it must do so in real world conditions which present many variables and very few constants. Mother Nature does not create wind in a uniform manner or from the same direction. At the same time, racecourses aren’t typically straight nor do riders maintain a perfect position as if in the wind tunnel atop a trainer. With that in mind, Campagnolo engineers set about to account for all of these variables in what has come to represent perhaps the most comprehensive aerodynamic study ever performed by the company to produce wheels that are WIND TUNNEL OPTIMIZED for real world conditions. The Bora WTO 45 carbon fibre rim takes a versatile aerodynamic design and adds an even more versatile rim depth making for a wheelset that is even better poised to take on varied terrain, courses and conditions. The lower profile is even more adept at slipping through side winds and confers an even higher degree of handling when averse and variable wind conditions are at play. While most aero projects concentrate solely on the rim, the WTO project took a comprehensive look at the entire wheel, ensuring that all components in its build confer aerodynamic efficiencies to the complete unit. To complement the new standard in aero rims both the hub and the spokes were redesigned to ensure a complete aero unit. The Bora WTO 45 incorporates the same aero hubs and spokes first seen on the WTO 77 and 60mm wheels. The hubs are constructed from aluminium and follow the same design premise of the rim in that it must be aerodynamically efficient in a versatile manner. Slimmer towards the centre and growing in width towards the flanges where it connects with new 3D aero profile spokes. The efficient wheel is appreciated when out on the road, and as such must be tested, developed and conceived considering the tire with which it is built. The research into making a more efficient rim already called for a wider stance in general but the 19mm inner width provided the multiple benefit of a better performing rim design, better fit with the larger tire sizes (25 and 28mm while compatible also with 23mm) and an overall more efficient complete unit (tire + rim). The wider stance allows the tire to take on a more aerodynamic shape and as such, allows for the tire to become efficient in terms of drag as well. The 19mm inner width is uniform across all wheels of the WTO family. While boosting aero efficiency is paramount, reducing rolling resistance pays significant dividends as well. One simple way to improve rolling efficiency is to add extremely efficient bearings. The Bora WTO 45 join the Bora WTO 60 as they roll smoothly atop USB ceramic bearings. Rolling resistance is created inside the hub but the friction between the tire and the road must be overcome to create forward movement as well. Rolling resistance varies depending on the type of tire being used and as such the WTO wheel family is constructed in a way to allow the use of the two most efficient tire solutions possible. The Bora 45 WTO incorporates the carbon fibre 2-Way Fit profile in order to offer the possibility to choose between tubeless and clincher tires, with no need for additional material or conversions. The new, complete range of WTO represents not only the most efficient wheels possible in terms of aerodynamic performance and low rolling resistance but by do so while maintaining an additional focus on weight, making for an ever more efficient total structure. Lighter wheels make for faster changes in speed that require less energy to move as a result of lower rotational mass. Campagnolo carbon expertise allows for the 77mm and 60mm rim to perform its task at a lower weight than comparable rim heights from competitors. The 45mm are no different, on par or lighter than the lightest wheels of similar rim depth. The hubs, made from aerospace grade alloys and engineered to reduce every unnecessary milligram from their construction also contribute to the scant weight of the overall wheel. Whereas the 77 and 60 represent true featherweights when compared against even the lightest wheels at their rim depth, the 45 enters into a very competitive segment in terms of weight. Despite the fact that at 45mm it is set against competing wheels based on weight alone, or on weight and minimal aero efficiency…the 45 tips the scales at a scant 1.496 grams. Reducing the weight to a minimum is a feat in and of itself but doing so while maintaining Campagnolo strict standards in terms of safety and reliability makes these wheels engineering examples worthy of every accolade they receive. Safety and reliability however does not only come from sound construction but also via a heightened degree of control with which to harness the speed of the fastest wheels on the road. The rim of the WTO 45 incorporates the same AC3 braking surface as found on the WTO 77 and WTO 60 wheels. The AC3 technology confers a “best in class” braking performance and its extreme control in all conditions makes it an imperative addition to all Campagnolo carbon fibre racing wheels. The Bora name is prestigious and with a long and extremely successful past and present, it has earned its good name repeatedly. The WTO project has proven itself worthy of being associated with this long pedigree of reliable performance solutions by setting yet another standard for the cycling industry. The BORA WTO family proudly joins the elite club of Bora wheels and Campagnolo is extremely pleased to announce that this prestigious family is growing. With the Bora WTO 45 there is now an extremely efficient carbon fibre racing wheel solution for all preferences. The new standard is here and now in numbers. Its name is BORA WTO. Features: The most aerodynamic The rim design enables the maximum amount of aerodynamic penetration when the wind angle is between 12° and 19°, making it a thrust for triathlon athletes. The streamlined design of the central part of the hub decreases the frontal area of the component whilst the special design of the flanges favours airflow detachment. The 18-spoke elliptical cross section in the front result in a far superior rolling resistance of the cross sections compared to competitor wheels. The smoothest The well-known USB cup-and-cone bearing system guarantees smoothness in the ceramic bearings. The 2-Way Fit profile allows you to mount either a clincher tyre or a tubeless tyre The C19 class allows you to mount tyres from 23, 25 to 28 mm, with perfect pairing of the rim-tyre system. Choose aero... but make it Campagnolo Campagnolo's rideability remains high despite the focus on aerodynamics. The wheel structure enables reducing energy dissipation, transferring all the energy produced by the cyclist to the asphalt. Specifications: Spokes: 18 steel spokes in the front elliptical cross section Anti-rotation technology on the radial spokes Versions Two different colorways: Bright Label and Dark Label Hub: Black aluminium monolithic hub USB cup-and-cone bearing system Hub edge: 100 mm in the front Pivot material: aluminium Rim: Profile height: 60 mm Rim material: carbon Rim cross section (H x W): 60 / 26.5 mm Rim class: C19 AC3 technology on the braking rim Water Transfer graphic Tyres: Clincher Tubeless
SRAM Force eTap AXS offers all of the advancements available, including more range and a smoother gear progression and the simplicity of eTap shift logic -so that you're always in the right gear. AXS allows you to easily personalize the groupset right from your phone and enable your choices while riding. Orbit technology offers next-level chain management for all the places a drop bar bike can go. It’s true innovation, for true advancement. Please Note: The SRAM Force eTap rear derailleur in this kit is only compatible with SRAM's 10-26T, 10-28T, and 10-33T 12-Speed cassettes.
SRAM Force eTap AXS 1x12 Speed Road GroupsetSRAM Force eTap AXS offers all of the advancements available, including more range and a smoother gear progression and the simplicity of eTap shift logic -so that you're always in the right gear. AXS allows you to easily personalize the groupset right from your phone and enable your choices while riding. Orbit technology offers next-level chain management for all the places a drop bar bike can go. Features: Shifters Rear derailleur and battery Charger and cord Quick start guideTechnologies:Changing Shift Modes During A Ride: So you want to use an enhanced shift mode (Compensating or Sequential) and switch back to manual shifting mid-ride? You can do that in less than a second (seriously) without ever touching your smart phone.No Worries Riding Rough Roads: eTap AXS rear derailleurs all come equipped with Orbit fluid dampers on the pulley cage for a quiet ride and outstanding chain security. Here's the secret to how you service it… do nothing. It never requires any maintenance.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.