DESIGNED TO LOOK GOOD ON OR OFF THE BIKE THIS RACKPACK COMBINED CLASSIC STYLING WITH MODERN DESIGN. The Altura Heritage Cycling Rackpack mixes a classic look with modern design crafted from a water-resistant 12oz waxed canvas and securely fixes to most racks with a hook and loop fastening. With a 7L capacity the Rackpack provides great storage for adventures when paired with the Heritage Pannier range but is large enough for the daily commute or touring ride. There is also a handy lid pocket and an internal pocket to keep essentials at hand while the adjustable shoulder strap quickly turns it into a bag to be used off the bike. FEATURES 12oz water resistant waxed canvas Hook & Loop rack fastening 7 litre capacity Lid closure with Woojin two tone buckles Large zippered lid pocket with key clip and internal pocket Rear zippered pocket Supplied with adjustable shoulder strap Reflective detailing Light loops at each side Main Fabric: 97% Cotton 3% Polyester Secondary Fabric: Lining: 100% Polyester Measurements are approx 290mm long x 120mm wide x 180mm high.
Fits: Formula RO Racing T1 Racing R1 Racing R1 C1 CR3 T1 RO Mega The One RX RR1 CURA SwissStop EXOtherm 2 pads combine an extremely durable smooth modulating pad compound with a cooling fin equipped back plate which provides consistent powerful braking in all conditions. Reduced pad wear rate is much lower than competitors Smooth consistent brake performance Lightweight construction High quality springs are supplied with every set of Swissstop disc brake pads Supplied as pairs (for one wheel)
Fits: Shimano XTR BR-M9000 BR-M9020 BR-M987 XT BR-M8000 BR-M785 SLX BR-M675 BRM666 FSA K-Force DB-TX-9000 Afterburner DB-TX-9150 REVER MCX1 SwissStop EXOtherm 2 pads combine an extremely durable smooth modulating pad compound with a cooling fin equipped back plate which provides consistent powerful braking in all conditions. Reduced pad wear rate is much lower than competitors Smooth consistent brake performance Lightweight construction High quality springs are supplied with every set of Swissstop disc brake pads Supplied as pairs (for one wheel)
Fits: Avid XO Trail Elixir 9 Trail Elixir 7 Trail SRAM Guide Ultimate RSC RS R RE SwissStop EXOtherm 2 pads combine an extremely durable smooth modulating pad compound with a cooling fin equipped back plate which provides consistent powerful braking in all conditions. Reduced pad wear rate is much lower than competitors Smooth consistent brake performance Lightweight construction High quality springs are supplied with every set of Swissstop disc brake pads Supplied as pairs (for one wheel)
Designed for use with quattro eggbeater and candy pedals. Enables you to use crankborthers pedals with 3 bolt cleat fitting road shoes. Composite platform and brass cleat Float: 6 degrees Release angle: 15 or 20 degrees Bolt pattern: 3 bolt
Ultra durable brass cleats for eggbeater candy smarty acid and mallet pedals. Premium strength brass Release angle: 15 degrees Bolt pattern: 2 bolt Adjustment: 2.2mm left/right Shims included
Ultra durable brass cleats for crankbrother pedals. Premium strength brass Release angle: 10 degrees Bolt pattern: 2 bolt Adjustment: 2.2mm left/right Shims included
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 304g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Cast Steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colour options: Black/Silver Blue/Silver or Red/Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat/half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Double shot Weight (per pair) 395g Spindle Forged scm 435 chromoly steel Body A380 aluminum Wings Stamped steel Spring 300 series stainless steel inner bearing Igus LL-glide bearing Cleats premium brass cleats included Pins Moulded traction pins release angle 15° or 20° Warranty 5 years
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 428g per pair Platform: Two piece aluminium + composite Wings: Stamped steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Bushing Outer bearing: Cartridge Traction pins: 8mm adjustable