The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 MIPS half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Lightweight, safe and versatile half-shell MTB helmet with integrated MIPS system and Fidlock fasteningDual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%Rotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner liningFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low-friction layer designed to reduce rotational motion transferred to the brain from impacts17 air intakes for maximum airflowHomologation: CPSC 1203, CE EN1078, AS/NZ 2063Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
All the protection, lightness and versatility a rider needs to tackle long distances with the utmost confidence. The Linea 03 half-shell MTB helmet offers the ideal versatility, lightness and safety to tackle any path with total control. Dual-density EPS foam offers enhanced protection while reducing the weight amountPolycarbonate outer shellRotor size micro adjustmentsAdjustable peakRemovable and washable inner liningAnti-bacterial and anti-odour inner lining17 air intakes for maximum airflowMaterials: Inner shell: 96% polystyrene. Outer shell: polycarbonate 1%, PA66 1%, foam 1%, polyester 1%.Greater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subject and exposed to impact. An advanced structure that, weighing just 340 grams in total (in size M), exceeds all international standards, namely CPSC 1203, CE EN1078, and AS/NZ 2063. The heightened comfort of the soft, anti-bacterial and anti-odour thermoformed lining allows the rider to focus only on the path, riding without constraints even over very long distances. 18 air vents spread across the entire surface of the shell allow optimal ventilation and breathability during every phase of activity and in all weather conditions. The rear design of the shell allows for hair pulled back into a ponytail or braid to pass through. Visibility is perfect on every route and in every condition due to the flexible, tilt-adjustable peak that is practical, solid and can be operated with one hand and with gloves on.
Cycloc Loop Helmet & Accessory HolderCycloc have designed a versatile and multi-functional storage device with its innovative Loop wall-mounted bucket-shaped hanger. Whether you're a cyclist or not, it acts as an awesome hallway container for your last-minute pick-ups before you leave the house.Innovative Accessory Holder and HangerPrimarily designed to keep your cycling accessories hung up and handy, this holder is perfectly sized to store your small accessories and suspend your bigger peripherals from. Sized to hang your helmet on after a hard day's riding, the 80mm deep holder will easily store lights, GPS computers, heart-rate monitors, sunglasses, multi-tools, water bottles and much more. It's also convenient for keys, wallets and purses, while bags and larger D-locks can be neatly slung around it.Brilliant on its own, the Loop becomes even more adaptable when paired with other Cycloc products to create wall mounted storage options for larger items such as floor pumps, or to create an eye-catching display for your favourite cycling items. A great companion for Cycloc's Endo, Solo and Hero bike holders, the Loop offers innovative and stylish storage for your riding essentials. Features: Material: Robust Polypropylene with Protective Rubber Inserts Size: 96 x 160mm, 80mm deep Mount: Easy to install "Invisible" wall plate mount (fixings included) Buy Cycloc Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cycloc Loop Helmet & Accessory HolderCycloc have designed a versatile and multi-functional storage device with its innovative Loop wall-mounted bucket-shaped hanger. Whether you're a cyclist or not, it acts as an awesome hallway container for your last-minute pick-ups before you leave the house.Innovative Accessory Holder and HangerPrimarily designed to keep your cycling accessories hung up and handy, this holder is perfectly sized to store your small accessories and suspend your bigger peripherals from. Sized to hang your helmet on after a hard day's riding, the 80mm deep holder will easily store lights, GPS computers, heart-rate monitors, sunglasses, multi-tools, water bottles and much more. It's also convenient for keys, wallets and purses, while bags and larger D-locks can be neatly slung around it.Brilliant on its own, the Loop becomes even more adaptable when paired with other Cycloc products to create wall mounted storage options for larger items such as floor pumps, or to create an eye-catching display for your favourite cycling items. A great companion for Cycloc's Endo, Solo and Hero bike holders, the Loop offers innovative and stylish storage for your riding essentials. Features: Material: Robust Polypropylene with Protective Rubber Inserts Size: 96 x 160mm, 80mm deep Mount: Easy to install "Invisible" wall plate mount (fixings included) Buy Cycloc Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cycloc Loop Helmet & Accessory HolderCycloc have designed a versatile and multi-functional storage device with its innovative Loop wall-mounted bucket-shaped hanger. Whether you're a cyclist or not, it acts as an awesome hallway container for your last-minute pick-ups before you leave the house.Innovative Accessory Holder and HangerPrimarily designed to keep your cycling accessories hung up and handy, this holder is perfectly sized to store your small accessories and suspend your bigger peripherals from. Sized to hang your helmet on after a hard day's riding, the 80mm deep holder will easily store lights, GPS computers, heart-rate monitors, sunglasses, multi-tools, water bottles and much more. It's also convenient for keys, wallets and purses, while bags and larger D-locks can be neatly slung around it.Brilliant on its own, the Loop becomes even more adaptable when paired with other Cycloc products to create wall mounted storage options for larger items such as floor pumps, or to create an eye-catching display for your favourite cycling items. A great companion for Cycloc's Endo, Solo and Hero bike holders, the Loop offers innovative and stylish storage for your riding essentials. Features: Material: Robust Polypropylene with Protective Rubber Inserts Size: 96 x 160mm, 80mm deep Mount: Easy to install "Invisible" wall plate mount (fixings included) Buy Cycloc Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Loop Helmet & Accessory Holder from Cycloc is the perfect storage option for your home or office. Easily hang up your helmet, jacket and place your accessories inside. This versatile holder is straight-forward and easy to mount to your wall thanks to the included fixings. Perfect for hanging up your helmet after a long day out on the road or holding your cycling accessories in one handy space so nothing is mistakenly left behind as you set out on your next ride. The Cycloc Loop Helmet & Accessory Holder is made from robust polypropylene for years of long-lasting use.