Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.,Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.,Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required..
Made from solid reclaimed oak and with 10 hooks, with the Runner Medal Hanger you've got a sturdy and stylish place to hang the medals you've earnt through hard work and determination. Be it a 100-metre dash at school sports day, a 5k charity run or the ultimate test of endurance of a marathon or even ultra-marathons, there will always be a place to hang the memories of great run events.
Made from solid reclaimed oak and with 10 hooks, with the Miles of Memories Medal Hanger you've got a sturdy and stylish place to hang the medals you've earnt through hard work and determination. Be it cycling, running, swimming, or triathlon, you'll always have the memories of your efforts on show.
Worry Less Design Miles of Memories Medal HangerYou've worked hard in training, smashed your event goals and got the medal to show for it. And with the Worry Less Design Miles of Memories Medal Hanger, you can proudly show off your hard-won medals.Made from solid reclaimed oak and with 10 hooks, with the Miles of Memories Medal Hanger you've got a sturdy and stylish place to hang the medals you've earnt through hard work and determination. Be it cycling, running, swimming, or triathlon, you'll always have the memories of your efforts on show. Features:Hanger is made from solid reclaimed oak and has 10 hooksWill arrive ready to hang on the wall with fixings attached to the backSize: 30cm x 10cm x 2cmBuy Worry Less Design Gifts from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:XLC replaceable mech hanger,Fits Haibike models with Quick Release dropout.