Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 10 Speed GoatLink Derailleur HangerIf you want to add extra capacity to your Shimano Shadow+ rear mechanism for the ultimate 1x10 speed setup, the Goatlink adaptor is for you. With this carefully machined component installed on your Shimano-equipped mountain bike (MTB), you’ll enjoy better shifting performance and be able to run Wolf Tooth’s Giant Cog (GC) cassette expanders and other brands of larger cassettes.The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. Made by Lindarets and Wolf Tooth, it re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40 tooth and GC 42 tooth sprockets.Features: Material: 6061 Aluminium Compatibility: Shimano Shadow+ 10-Speed rear derailleurs (clutch-type only) Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10-Speed Optimised for Wolf Tooth's 40 and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40T or 11-42T 10-Speed cassette You will never need a longer b-screw with the GoatLink Made in the USA Direct Mount-native frames and SRAM rear derailleurs are not supported Part Numbers: WT10SGLINK Weight: 19g Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Please Also Note: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch-type only) that have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack Hanger Alignment Tool KitThis thru-axle kit is specifically designed to work on 12mm thru-axle and 5mm quick release bikes. Using this handy tool kit, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This tool is suitable for use on 12mm thru-axle and 5mm quick release bikes. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless Steel Use: MTBIncludes: Thru Axle and Quick Release KitCompatibility: Works on 12mm thru axle and 5mm quick release bikesMade in the USAWeight: 324gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack Hanger Thru Axle Alignment ToolThis thru-axle kit is specifically designed to work on 12mm thru-axle bikes. Using this handy thru-axle tool, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless SteelType: Thru Axle Kit - Works on 12mm thru axle bikesMade in the USAWeight: 297gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance,CNC machined from solid 6061 aluminium to exact tolerances,Stiffer than any original equipment hanger which improves shifting performance,Still breaks before your frame does to perform its main function,All hangers come with instructions and hardware,Direct replacement for original equipment with guaranteed fit,Black anodised for extra scratch and damage resistance,Laser etched for easy part identification.
Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performanceCNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger whichimproves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instructions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification.
Wheels Manufacturing Emergency derailleur hanger for all bikes with quick release rear wheelsAn essential emergency hanger that allows one to get home by re-attaching the rear derailleur in the event of a failureAttaches to any dropout and held in place by the quick release skewerAllows access to about half of your bikes shifting rangeHigh quality CNC machined aluminiumBlack anodised for resistance to damageCan be easily reused
Cannondale Single Sided 2Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification
Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performanceCNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger whichimproves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instructions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification#FitsFits:- Audacio Series - 2010-2013- Ice Lady - 2010- Iron - 2010- OnyxL - 2010- Pro Race - 2010- Pro Race 500 - 2010- Rock Lady - 2010- Shaper 300/ 500/ 700 - 2010- Tandem Route 2 Race Fit - 2010- Tandem X2 Race Team - 2010- Tecnic Series - 2010- X Conttrol L 310 - 2010- X-Control 500 Alloy 710/510/410/310/210 - 2010- Zesty 314L/ 214L - 2010
Gear Hanger suitable for the following frames:Type H Kona Dropouts.Also fits:Broadribbs Stows WadesCycles KHS MARTYNASHTON'S NEW TRIALS BIKEUpgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance CNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger which improves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instuctions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification