Ths MTB riser bar features a hard-wearing 7000 series alloy construction, which makes it perfect at handling all the intensity that comes with blasting across the mountains at speed. Coming equipped with a 35mm clamp diameter, this model allows for straightforward installation, so you can enjoy its fast and dependable steering on your off-road adventures.
With the same ergonomic benefits as the S-Works version the Expert Shallow delivers a strong and affordable bar with no compromise. 2015 premium butted aluminium high-strength design. Ergonomic top perch alleviates pressure on hands smooth transitions for fit and comfort. Shallow bend drop design. UCI legal compatible with Shimano SRAM and Campagnolo controls. Front of bar optimized for dual-cable routing. Clamp Diameter: Oversized 31.8mm Bar Width (centre-to-centre): 40/42/44cm Shallow Bend Drop: 123mm drop x 75mm reach
Nukeproof Sam Hill Series MTB Riser HandlebarThe Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features: Material: 7050 Aluminium Finish: Acid dipped micro shot-peened Bar Diameter: 31.8mm Back-sweep: 9° Up-sweep: 6° Built for: Trail, All Mountain, Enduro, Downhill, Freeride Weight: Weight: 313g (780mm x 20mm)Handlebar instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The PLT Ergo Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. The new and improved oversized ergonomic top section offers a greater selection of comfortable handlebar positions. Road racing drop handlebarLightweight, high strength aluminium alloy constructionSingle recessed groove cable routingErgonomic design offers a choice of comfortable positions70mm Reach, 125mm DropWeight from 275 grams
The PLT Ergo Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. The new and improved oversized ergonomic top section offers a greater selection of comfortable handlebar positions. Road racing drop handlebarLightweight, high strength aluminium alloy constructionSingle recessed groove cable routingErgonomic design offers a choice of comfortable positions70mm Reach, 125mm DropWeight from 275 grams
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
The PLT Ergo Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. The new and improved oversized ergonomic top section offers a greater selection of comfortable handlebar positions. Road racing drop handlebarLightweight, high strength aluminium alloy constructionSingle recessed groove cable routingErgonomic design offers a choice of comfortable positions70mm Reach, 125mm DropWeight from 275 grams
The PLT CT Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. Road Racing Drop HandlebarLightweight, High Strength Aluminium Alloy ConstructionSingle Recessed Groove Cable RoutingOffers a Choice of Comfortable PositionsWeight from 245 Grams
The PLT CT Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. Road Racing Drop HandlebarLightweight, High Strength Aluminium Alloy ConstructionSingle Recessed Groove Cable RoutingOffers a Choice of Comfortable PositionsWeight from 245 Grams
The PLT CT Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. Road Racing Drop HandlebarLightweight, High Strength Aluminium Alloy ConstructionSingle Recessed Groove Cable RoutingOffers a Choice of Comfortable PositionsWeight from 245 Grams
The PLT CT Handlebar is constructed from a high strength, yet lightweight, aluminium alloy. Due to these properties this particular alloy is commonly used in the aircraft industry. The double butted design allows for lower weight whilst maintaining strength. The oversized 31.8mm clamp diameter increases strength and rigidity, reducing unwanted flex. Road Racing Drop HandlebarLightweight, High Strength Aluminium Alloy ConstructionSingle Recessed Groove Cable RoutingOffers a Choice of Comfortable PositionsWeight from 245 Grams