Durably constructed from a robust material, these tough mountain bike (MTB) grips are made of Race Face’s own proprietary compound and feature a ramped profile on the finger side and a varied depth on the palm side. The stunning Race Face Lock On Grips give a long gripping sensation and a moisture-shedding performance to keep you comfortable and in control in all riding conditions.
Constructed using tried and tested, cold-drawn 7075 aluminium, the Race Face Turbine R 35 bar will give you the confidence you need to push yourself to the limit on the trails. It features a large 35mm stem clamping section and the same aggressive sweep as previous models. Plus its impressive strength-to-weight ratio ensures it can withstand plenty of abuse.
The Race Face Next R handlebar also adopts the larger 35mm clamp area for increased stiffness and has shaved weight in other areas to retain the low weight and the performance that Race Face is known for. At 800mm in width and cuttable to your own preference, this tough yet lightweight riser bar is trail and all-mountain (AM) bike ready, but with downhill-level strength.
Designed with the extreme gravity set in mind, the Atlas FR ½ riser bar, at 785mm, is the widest bar Race Face ever produced. Designed specifically for abusive DH racers. Manufactured from cold-drawn, seamless Air Alloy material. Internal taper increases strength and durability without adding weight. New ultra low and ultra wide riser geometry - reduces cockpit height to lower the front end (crown to axle height). When The Riding Gets Rowdy For dedicated gravity riders with a need for speed, nothing gives you more control and confidence than wrapping your hands around an Atlas handlebar. Plenty wide and strong, this bar will have you shredding DH and Enduro lines like a pro. Manufacturer's Part Number: OHB11AF31.8PUR Purple 31.8mm 785mm 13mm
It is one of the three points of contact between you and your bike. A good set of grips will offer you more control while riding and lessen hand fatigue.
Plus you can cut it to shape to fit on any bar.
The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding. Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same concept to find your most comfortable handlebar shape. The Snake Handlebar If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach (85mm) and deeper, classic-style drop (140mm). The Chameleon Handlebar If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach (85mm) but a shallower, more ergonomic-style drop (135mm). The Bull Handlebar If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach (80mm) and a shallower, more ergonomic-style handlebar drop (130mm).
Weight: 52g (each rol
The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding. Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same concept to find your most comfortable handlebar shape. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach (85mm) and deeper, classic-style drop (140mm). The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach (85mm) but a shallower, more ergonomic-style drop (135mm). The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach (80mm) and a shallower, more ergonomic-style handlebar drop (130mm). Please Note: Your shoulder width should determine your handlebar width, choose from the following centre-centre
The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding. Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same concept to find your most comfortable handlebar shape. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Spine Concept guidelines to help you choose your most comfortable road handlebar shape. Available in three different drops and reach: Bull 38,40mm width: 75mm Reach, 125mm Drop; 42,44,46mm width: 80mm Reach, 130mm Drop Chameleon 38,40 80mm Reach, 130mm Drop; 42,44,46 85mm Reach, 135mm Drop Snake 38 75 Reach, 125 Drop; 40 80mm Drop 130mm Reach; 42,44,46 85mm Drop 140mm Drop
These end plugs feature stainless steel bolts for extra durability.
QuickClick™ is Topeak’s proprietary quick release mounting system that allows fast and easy tool-free mounting and removal of QuickClick™ equipped bags, tools, lights and accessories.