For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
A careful blend of superior quality construction, meticulous design precision and ultimate road bike performance.
Compact light and comfortable The all-new Contact SLR handlebar is a full carbon handlebar with updated ergonomic shaping and revised compact geometry that provides maximum compliance and superior handling at a feather-light weight. Features Short reach and shallow drop for instant transition from the tops to the hoods to the drops Easy-to-grip elliptical drops boost bar stiffness without adding weight A wider curved top section adds vertical compliance and delivers a smooth ride Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides Specifications Material: Carbon Clamp Diameter: 31.8 mm Width: 400/420/440 mm Drop: 125mm Reach: 72mm Weight: 185g (420mm)
Easton EC90 Aero Road HandlebarMade from unidirectional (UD) carbon fibre and boasting low-drag shaping, the EC90 Aero bars will give you an edge over your competitors. Packed with Deda Elementi’s best technologies, the bar’s shape increases hand comfort on long rides and the drop’s 4-degree flare gives you better clearance for sprinting. Ideal for pairing with modern road bikes, these super lightweight bars also have internal cable routing to give your bike a clean, uncluttered finish.Responsive and Vibration AbsorbingResponsive and featuring a tapered design, these bars offer extra strength in key areas for precise handling and efficient power transfer and compliance in low-stress areas to disperse vibrations.Features:Material: Easton EC90 Carbon FibreFinish: Matte Unidirectional (UD) carbonAnatomic sculpted top wing sectionWidth measured centre to centreReach: 80mmDrop: 125mmBend Type: CompactDrop Flare: 4°Stem Clamp Area: 31.8mmLever Compatibility: Standard 23.8-24.2mm clampInternal Cable Routing: YesGPS Mount Compatible: NoClip-On Aero Bars Compatible: NoWeight: 230g (42cm)Technologies:Taperwall Technology: TaperWall starts with computer-modulated draw benches that create multiple thicknesses in the same tube, so the tube walls can be reinforced anywhere with incredible precision. For carbon composite components, TaperWall applies more material to wall surfaces where stiffness is paramount and less material to areas requiring more compliance. The advantage is clear in aluminium or composite: TaperWall radically enhances strength and durability, at less weight. Additionally, TaperWall produces lively, responsive ride quality and improved shock absorptionBuy Easton Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Thomsons road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Monococque construction for safety and comfort. Thomsons Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed. All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus. The Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders
Deda Elementi Vinci Shallow Carbon Road HandlebarFeaturing a lightweight carbon construction, this road bike drop handlebar allows riders to benefit from increased stiffness and strength when tackling steep climbs without worrying about any unnecessary weight holding them back when sprinting and descending. Developed by Deda Servizio Corse together with team mechanics and riders, this model is also equipped with a Super Shallow shape that optimises comfort and minimises effort during sprints. Another highlight is it's kitted out with a Deda Internal Cable Routing (DCR) system, which allows for fully internal cable routing inside the handlebar. This means that riders can enjoy more handlebar space as well as a clean, sleek appearance on their ride. Designed without compromise for perfect integration with the Vinci stem.Stiff, Lightweight and Ergonomic Carbon BuildThe Vinci cockpit ideally matches the modern philosophy of racing bikes designed to be aero while still being light and most importantly stiff. The detail and precision that Deda has put into this carbon handlebar is instantly evident when looking at the aero profile and cross-section that has been designed to minimise drag and provide an ergonomic grip for any riding style.Drop Handlebar with Super Shallow ShapeThis handlebar also features Deda's Super Shallow shape for a faster reach on the drops. It also features two removable foils to be compatible with Superzero clip-on bars or any computer mount.Features: Material: Carbon Finish: Polish On Black Use: Road Shape: Super Shallow Diameter: 31.7mm Reach: 75mm Drop: 125mm Cable Routing Notes: Compatible with Campagnolo EPS - Shimano DI2 cable routing, Compatible with full internal cables routing (up to 4 cables) Weight: 225g (42cm option)Manufacturer's Part Numbers: DBV040SP Black Polished on Black 40cm DBV042SP Black Polished on Black 42cm DBV044SP Black Polished on Black 44cmBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is so compact that it fits into an included 9.5”x7”x4” zippered carrying case for easy storage and travel. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. The Hornet is our first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of SeaSucker’s powerful 4.5” vacuum cups (120lb rated pull-strength each) to hold the handlebars and hang a bike weighing not more than 35 lbs from the rear glass. Plastic ladder straps securely hold both road and MTB bars to the vacuum cups. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars and you’re done. And when it comes time to remove it, the Hornet detaches just as quickly and breaks back down into its component parts for storage in its case. The Hornet also comes with a safety strap that loops around the bike’s steerer tube and into a sewn-in cam buckle. The strap’s tail has a built-in plastic peg that, when closed in the hatchback, secures the strap to the car. NOTE: this rack is intended for use on hatch-back style vehicles only, and should not be used on a surface that does not have at least a 45 degree angle from horizontal.
Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70, AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops.Features - Easton EC90 AX HandlebarMCD (Max Contact Drop) Technology,16° Flare for more control on gravel and gnarly terrain,Di2 compatible.Specifications:Clamping: 31.8 mm,Reach: 80 mm,Drop: 120 mm,Flare: 16°.Features:MCD (Max Contact Drop) Technology,16° Flare for more control on gravel and gnarly terrain,Di2 compatible.
Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparralled ride. Strength and beauty count for something as well. This bar will look good and ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. The very best bar you can buy for a rigid MTB
Provides the low drag and sleek look of a one-piece system with the fit and interchangeability benefits of a two-piece bar and stem. 8 degrees of pitch adjustment. Narrow bar width with flared drops brings your arms closer together when on the hoods for lower drag. Must be paired with Cannondale's SystemBar stems. Ready for internal cables/housing/hoses for better aerodynamics and clean front of bike. Weight as pictured: 316 grams (in 42mm size) Sizes Available: 38cm 40cm 42cm 44cm