Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
With the Gravel100 RHM Handlebars, Deda have used their experience and expertise learnt from the Zero100 RHM handlebars which are just about the most reliable and classic handlebars out on the market today. Made to the same tried and tested RHM shape as their top end Alanera bar, it ensures comfort, and speed of movement, whether you're on the drops or on the flats. To make the handlebars more suitable for gravel and cyclocross racing, the Gravel100 handlebars feature a 12 degree flare at the drops to provide more stability while still preserving the typical drop bar feel. These bars feature a drilled entry hole for installation of Di2 bar-end junction box. Key Features: Shape: RHM (Rapid Hand Movement),Material: Triple Butted Alloy 7075,Handlebar Dia: 31.7mm,Di2 Compatible,Reach: 75mm,Drop: 130mm ,Flare angle: 12deg,Sizes: 40-42-44-46cm (Width measured outside-to-outside at the lever position),Weight: 260g,Finish: Black on Black (BoB),. Note: wide centre area for mounting accessories and Deda clip-on bars
Although it features drops with a 12-degree flare at the ends for better off-road handling, the Deda Gravel100 RHM bar still boats Deda’s “Rapid Hand Movement” drop shaping. This helps to preserve the brake/shifter lever positions for a more natural hand movement, enhancing your comfort and control. Constructed from tough, yet lightweight triple butted alloy, this bar also features a wide clamping area. This means there’s plenty of room for accessories.
Deda Elementi Gravel100 RHM HandlebarInspired by the design of Deda Elementi’s rider favourite Zero100 road bike model, the Gravel100 RHM Handlebar retains the same drop bar lever positioning but places your hands farther apart for increased control on challenging terrain types. This is thanks to the 12-degree flare on its drops, which ensure you’re ready for anything as your route ahead gets even more challenging. Made from a strong triple butted alloy with a black on black finish, this bar will enhance the looks and performance of any modern gravel or cyclocross (CX) bike.Features:Material: Triple butted alloy 7075 Finish: Black on black (BOB) Drop Shape: Rapid Hand Movement (RHM) Stem Clamp Area Diameter: 31.7mmReach: 75mmDrop: 130mm Drop Flare: 12° Lever Compatibility: Standard 23.8mm drop bar lever clamps Use: Gravel, Cyclocross (CX) Width Measurement: Width measured outside-to-outside at the lever position Aero Bar Compatible: Yes, Deda clip-on bars (eg. Deda Parabolica and fastblack2) GPS Mount attachable: Yes Internal Cable Routing: No Wide centre area for mounting accessories Weight: 260g (42cm)Buy Deda Elementi from Chain Reaction Cycles, the World's Largest Online Bike Store.
ProTaper MTB Carbon HandlebarOffering a fantastic balance of stiffness and strength as well as an impressively low weight, this mountain bike (MTB) riser handlebar is kitted out with a carbon construction. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar.Carbon MTB Riser Bar with Comfortable GeometryEngineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty.Features: Material: Carbon Use: MTB Width: 810mm Upsweep: 4 degrees Backsweep: 8 degrees Diameter: Multiple options available to select Rise: Multiple options available to select Weight: 190gTechnologies: ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. Cut marks provide a range of width options. Textured Grit Grip finish in clamp areas eliminates over-tightening of components.Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm RiseBuy ProTaper Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 6 T-Handle ToolsetIdeal for fitting, tuning and removing bike fitting and components, the Bicycle Set 6 from Wera Tools is a 10-piece T-Handle Hex wrench set that comes complete with a metal storage rack. This toolset is a beneficial addition to any workshop, home work shed or garage.Tool specialist Wera presents Bicycle Set 6, a 10-piece T-Shaped Hex and Torx Key set for bicycle workshop maintenance and repairs. Supplied with a metal rack for clearly arranged storage in the workshop, this set is suitable for Road, mountain bike (MTB) and electric bikes (E-Bike). The special handle shape with its ergonomic recessed finger grips, allows for fatigue-free working and easy operations on the bike whether you are tightening or loosening bolts. The extra-short arm allows for the transmission of extremely high torques through the leverage of the long arm. Due to the special surface treatment, the blades receive a high level of corrosion protection, and fitting accuracy of the screw is also optimised. This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which Key you need for the job. Features: 1 x Hex 454 Key (2.5mm) 6 x Hex 454 HF Keys (3mm, 4mm, 5mm, 6mm, 8mm, 10mm) 3 x TORX HF Keys (TX10, TX20, TX25) 1 x Metal storage rack Size: 280mm x 220mm x 75mm Set Weight: 1561gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tool specialist Wera presents Bicycle Set 6, a 10-piece T-Shaped Hex and Torx Key set for bicycle workshop maintenance and repairs. Supplied with a metal rack for clearly arranged storage in the workshop, this set is suitable for Road, MTB and E-Bikes.The special handle shape with its ergonomic recessed finger grips, allows for fatigue-free working,The extra-short arm allows for the transmission of extremely high torques through the leverage of the long arm,Features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which Key you need for the job,All Wera tools are covered by a lifetime guarantee.The special handle shape with its ergonomic recessed finger grips, allows for fatigue-free working and easy operations on the bike whether you are tightening or loosening bolts. The extra-short arm allows for the transmission of extremely high torques through the leverage of the long arm. Due to the special surface treatment, the blades receive a high level of corrosion protection, and fitting accuracy of the screw is also optimised.This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which Key you need for the job.Set Includes:1 x Hex 454 Key (2.5mm),6 x Hex 454 HF Keys (3mm, 4mm, 5mm, 6mm, 8mm, 10mm),3 x TORX HF Keys (TX10, TX20, TX25),1 x Metal storage rack.Technical Specification:Size: 280mm x 220mm x 75mm,Set Weight: 1561g.
You do not need to compromise with the Rip the 8 degree sweep give the aggressive yet comfortable position for all-day rides or fast XC racing. The bars in are finished in Stealth Matt Black UD Carbon specially designed to have the perfect layup to create strength, stiffness and flexibility to give you the best ride.
ULTIMATE USE RIP Carbon Mountain Bike HandlebarsThe ULTIMATE USE RIP Carbon Handlebars features a completely flat profile, which makes it ideal for use with the modern geometry that's seen on today's cross country and trail orientated mountain bikes. Constructed using high-quality UD carbon fibre, it offers outstanding strength and stiffness in key areas for precise handling and a small amount of flexibility in other areas for increased comfort. The RIP Carbon bars can also be rotated to offer a 5° drop for a more aggressive riding position.Features: Material: Unidirectional Carbon Fibre Finish: Matt UD carbon Backsweep: 8° Flat or 5mm dropBuy ULTIMATE USE Components from Chain Reaction Cycles, the World's Largest Online Bike Store.