For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
A careful blend of superior quality construction, meticulous design precision and ultimate road bike performance.
Compact light and comfortable The all-new Contact SLR handlebar is a full carbon handlebar with updated ergonomic shaping and revised compact geometry that provides maximum compliance and superior handling at a feather-light weight. Features Short reach and shallow drop for instant transition from the tops to the hoods to the drops Easy-to-grip elliptical drops boost bar stiffness without adding weight A wider curved top section adds vertical compliance and delivers a smooth ride Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides Specifications Material: Carbon Clamp Diameter: 31.8 mm Width: 400/420/440 mm Drop: 125mm Reach: 72mm Weight: 185g (420mm)
Easton EC90 Aero Road HandlebarMade from unidirectional (UD) carbon fibre and boasting low-drag shaping, the EC90 Aero bars will give you an edge over your competitors. Packed with Deda Elementi’s best technologies, the bar’s shape increases hand comfort on long rides and the drop’s 4-degree flare gives you better clearance for sprinting. Ideal for pairing with modern road bikes, these super lightweight bars also have internal cable routing to give your bike a clean, uncluttered finish.Responsive and Vibration AbsorbingResponsive and featuring a tapered design, these bars offer extra strength in key areas for precise handling and efficient power transfer and compliance in low-stress areas to disperse vibrations.Features:Material: Easton EC90 Carbon FibreFinish: Matte Unidirectional (UD) carbonAnatomic sculpted top wing sectionWidth measured centre to centreReach: 80mmDrop: 125mmBend Type: CompactDrop Flare: 4°Stem Clamp Area: 31.8mmLever Compatibility: Standard 23.8-24.2mm clampInternal Cable Routing: YesGPS Mount Compatible: NoClip-On Aero Bars Compatible: NoWeight: 230g (42cm)Technologies:Taperwall Technology: TaperWall starts with computer-modulated draw benches that create multiple thicknesses in the same tube, so the tube walls can be reinforced anywhere with incredible precision. For carbon composite components, TaperWall applies more material to wall surfaces where stiffness is paramount and less material to areas requiring more compliance. The advantage is clear in aluminium or composite: TaperWall radically enhances strength and durability, at less weight. Additionally, TaperWall produces lively, responsive ride quality and improved shock absorptionBuy Easton Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Thomsons road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Monococque construction for safety and comfort. Thomsons Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed. All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus. The Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders
Deda Elementi Vinci Shallow Carbon Road HandlebarFeaturing a lightweight carbon construction, this road bike drop handlebar allows riders to benefit from increased stiffness and strength when tackling steep climbs without worrying about any unnecessary weight holding them back when sprinting and descending. Developed by Deda Servizio Corse together with team mechanics and riders, this model is also equipped with a Super Shallow shape that optimises comfort and minimises effort during sprints. Another highlight is it's kitted out with a Deda Internal Cable Routing (DCR) system, which allows for fully internal cable routing inside the handlebar. This means that riders can enjoy more handlebar space as well as a clean, sleek appearance on their ride. Designed without compromise for perfect integration with the Vinci stem.Stiff, Lightweight and Ergonomic Carbon BuildThe Vinci cockpit ideally matches the modern philosophy of racing bikes designed to be aero while still being light and most importantly stiff. The detail and precision that Deda has put into this carbon handlebar is instantly evident when looking at the aero profile and cross-section that has been designed to minimise drag and provide an ergonomic grip for any riding style.Drop Handlebar with Super Shallow ShapeThis handlebar also features Deda's Super Shallow shape for a faster reach on the drops. It also features two removable foils to be compatible with Superzero clip-on bars or any computer mount.Features: Material: Carbon Finish: Polish On Black Use: Road Shape: Super Shallow Diameter: 31.7mm Reach: 75mm Drop: 125mm Cable Routing Notes: Compatible with Campagnolo EPS - Shimano DI2 cable routing, Compatible with full internal cables routing (up to 4 cables) Weight: 225g (42cm option)Manufacturer's Part Numbers: DBV040SP Black Polished on Black 40cm DBV042SP Black Polished on Black 42cm DBV044SP Black Polished on Black 44cmBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chorus 12x Hydraulic Ergos and Calipers New 12x Chorus Hydraulic Ergo levers and disc calipers for use with the disc brake groupset. These are now be supplied pre-filled with hydraulic fluid. Campagnolo's fantastic ergonomics, that over the years have become a sort of calling card, have been even further improved with the latest introduction of the new 12-speed transmissions. the new shifters are not just ergonomic but also customisable, this new standard is embodied in the design of the Chorus levers. Apart from the aluminium brake lever with a coating that enhances its finish and feel the Chorus Ergopowers are almost identical to those on the Super Record and Record controls. The new design of the new components makes them unique and versatile, with redesigned brake lever hoods, brake lever and bigger shift levers, together with the new Ergopower control “reach” that can be adjusted to suit hands of different sizes. Campagnolo’s tried and tested one-lever-one-action philosophy prevents unintentional shifts, even during tense competition or due to tiredness. The internal Ultra-Shift mechanism controls the 12-speed rear derailleur, letting the rider shift up by up to 3 sprockets and down by up to 5 sprockets in a single movement. Chorus controls deliver the same extremely durable, soft shifting performance of the other 12-speed groupsets thanks to new cables and their housings. Technologies: Reach Adjustment: The brake lever can be adjusted by up to 16 mm to adapt to hands of different sizes and fingers of different lengths. ULI (Upshifting Lever Integration) Technology: More space under the control body when gripping the Ergopower control. Vari-Cushion Technology: Ergonomic silicone cushioning. One lever One action: One lever for each action, eliminating the risk of accidentally using another control. Ultra-Shift mechanism: This enables multiple shifting (upshifting up to 3 sprockets at a time and downshifting up to 5). Features and Benefits: Comfortable support: The controls offer good, safe grip when standing pedaling or when leaning high on the handlebars. Quick shifting: When the chain engages immediately, the front and rear derailleurs can be actioned with minimum effort and in any position on the handlebars. Multishifting: An unexpected climb, a sudden sprint: instantly finding the right combination takes no time at all thanks to the multiple action guaranteed by Ultra-Shift technology. Ergonomics: Shaped cushioning and an adjustable reach make these controls perfect for any cyclist, regardless of hand or finger size. Weight: 503g per pair (sold individually)
Whether you’re a pro or simply training hard, PRECISION powermeters deliver industry-leading accuracy, highly dependable cadence data, 3D powermeter technology capable of measuring tri-axial strain on your crank arm. Designed to be durable and lightweight, compatible with ANT+ and Bluetooth head units, PRECISION helps you train harder and smarter.PRECISION Ride Ready comes installed on a new Shimano left crank arm (105, Ultegra, or Dura-Ace). These crank arms will fit bottom brackets using the Hollowtech ii interface. Key Features: 3D powermeter technology (patent pending) measures tri-axial strain on your crank arm, Accurate, consistent data, Lightweight, compact design, Battery status indicator via 4iiii app, Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products, User-friendly app and configurable rider compensation scale factor, Easy setup and maintenance, . Specifications: Weight: 9 grams, Data accuracy: +/- 1% error margin, Battery life: 100+ riding hours on 2032 coin cell battery.
Shimano ST-R7170 105 Double Hydraulic Di2 LeverBringing electronic wireless Di2 shifting to a new set of riders, this shift/braker lever combines industry-leading functionality with trickle-down technologies from the Dura-Ace and Ultegra series. After years of research and development, Shimano's 105 series now offers Di2 electronic shifting for the first time, bringing precise, intuitive gear changes to even more riders. Not only does it offer worry-free Di2 shifting in a compact shifter size, but it also features technologies such as Reach Adjust and customised button functions that allow you to dial in your ideal ergonomics. For those who have only experienced mechanical shifting and ergonomics, this model marks a new era of affordable performance.Reach AdjustThis model's brake lever is equipped with a Reach Adjust mechanism. The distance from the handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.E-Tube ProjectShimano's genuine application E-Tube Project Cyclist allows you to customise your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get the more detailed bike maintenance by connecting to your bike by wire with E-Tube Project Professional application.Dual Control LeverDCL stands for Dual Control Lever. It has brake and shifting functions in the system and enables easy operation. Ergonomic innovation is probably more critical to the higher standard performance than the added gearing. The shift internals borrow the robustness from Shimano's MTB technology and are so smooth and effortless that one finger shifts front and rear are possible. Indeed, shifting is the ultimate act of Shimano Total Integration, and simply has to be experienced to be understood.Features: Shifter Type: Dual Control Lever (DCL) Use: Road Speed: 12 speed Di2 Connectivity: Wireless Di2 shifting Battery Type: CR1632 x 2 Recommended Brake Caliper: BR-R7170 (available separately) Brake Lever Clamp Band: 23.8 - 24.2mm Firmware Update by E-Tube Project: Yes Mineral Oil: Shimano Mineral Oil Adjustments: Reach Adjust, Free Stroke Adjust, Funnel Bleeding Single or Pair: Single, sold individuallyTechnologies: Clean Cockpit: Wireless connection enhances the aesthetic of your bike while keeping shifting lightning fast. Longer lasting: Uses two CR1632 batteries (battery life: 3.5 to 4 years). Compact, ergonomic performance cascaded from Dura-Ace. Raised hood peak improves ergonomics, while a longer hood body increases hand support. Make Dura-Ace yours with custom button function and adjustable ergonomics. Easily change button function with the E-Tube app. Find your optimum lever position with simple reach adjust.Manufacturer's Part Numbers: STR7170L Black Left Hand STR7170R Black Right HandA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is so compact that it fits into an included 9.5”x7”x4” zippered carrying case for easy storage and travel. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. The Hornet is our first “leave-the-front-wheel-on” bike rack. It is designed to mount to the back window of any hatchback, SUV or minivan using two of SeaSucker’s powerful 4.5” vacuum cups (120lb rated pull-strength each) to hold the handlebars and hang a bike weighing not more than 35 lbs from the rear glass. Plastic ladder straps securely hold both road and MTB bars to the vacuum cups. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. Simply pump the two vacuum cups onto the back windshield, close the ladder straps around the bars and you’re done. And when it comes time to remove it, the Hornet detaches just as quickly and breaks back down into its component parts for storage in its case. The Hornet also comes with a safety strap that loops around the bike’s steerer tube and into a sewn-in cam buckle. The strap’s tail has a built-in plastic peg that, when closed in the hatchback, secures the strap to the car. NOTE: this rack is intended for use on hatch-back style vehicles only, and should not be used on a surface that does not have at least a 45 degree angle from horizontal.