The legendary Shimano XT Brake Lever gives superb braking performance which allows you to stay fully focused on the trail ahead. This coupled with the ability to tune them to your preference provides you with fantastic brakes for you to tackle the high demands of mountain biking.Optimized lever axle position with additional contact point and refined ergonomicsGreater flexibility and action-optimized cockpit layout10% stiffer than M8000 even under high temp conditionsQuicker brake engagement with shorter free strokeToolless reach adjust & Free stroke adjustThese levers offer a quicker brake engagement with a shorter free-stroke with toolless reach and free stroke adjustment so that you can fine tune them to your liking. They are stiffer than the M8000 levers even in high temperature conditions. The lever axle position has been optimised for additional contact point and refined ergonomics.
The legendary Shimano XT Brake Lever gives superb braking performance which allows you to stay fully focused on the trail ahead. This coupled with the ability to tune them to your preference provides you with fantastic brakes for you to tackle the high demands of mountain biking.Optimized lever axle position with additional contact point and refined ergonomicsGreater flexibility and action-optimized cockpit layout10% stiffer than M8000 even under high temp conditionsQuicker brake engagement with shorter free strokeToolless reach adjust & Free stroke adjustThese levers offer a quicker brake engagement with a shorter free-stroke with toolless reach and free stroke adjustment so that you can fine tune them to your liking. They are stiffer than the M8000 levers even in high temperature conditions. The lever axle position has been optimised for additional contact point and refined ergonomics.
Shimano's Deore XT hydraulic T8100 brake lever features a longer 3-finger lever and I-SPEC II mounting capability. Compatible with 4-piston brake calipers, the BL-T8100 lever provides greater stopping power and intuitive modulation tuned for both standard bikes and E-bikes.Ergonomic and powerful Servo Wave XT hydraulic disc brake levers offer exceptional control and modulationShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping powerAdjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagementI-spec-EV compatibleEasy access no tools lever reach adjustment dial for custom lever feel and positionForged alloy brake lever for optimum strength and reliabilityMineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluidHinged clamp for quick installationI-spec-II compatible
Shimano's Deore XT hydraulic T8100 brake lever features a longer 3-finger lever and I-SPEC II mounting capability. Compatible with 4-piston brake calipers, the BL-T8100 lever provides greater stopping power and intuitive modulation tuned for both standard bikes and E-bikes.Ergonomic and powerful Servo Wave XT hydraulic disc brake levers offer exceptional control and modulationShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping powerAdjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagementI-spec-EV compatibleEasy access no tools lever reach adjustment dial for custom lever feel and positionForged alloy brake lever for optimum strength and reliabilityMineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluidHinged clamp for quick installationI-spec-II compatible
Designed to provide you with a better sports bicycle experience the PRO Discover Alloy Handlebar provides a wide and robust base from which to control your gravel bike. Boasting a 20-degree flare they are constructed from 6066 alloy, have a compact shape to their drops and ergonomically designed top sections. Developed for gravel racing and lightweight bike packing adventures they are available in 40, 42 and 44-centimetre widths, the narrowest of which tip the scales at 270 grams. They also boast semi-internal cable routing and were designed to complement Shimano s GRX gravel components.Gravel racing and lightweight bike packing handlebars6066 alloy constructionLightweight and robustCompact design to the dropsErgonomic top sections for improved comfortDeveloped compliment Shimano GRXSemi-internal cable routingFlare: 20-degreesSizes: 40 and 42 cm widthsWeight: From 270g31.8mm clamping diameter
Designed to provide you with a better sports bicycle experience the PRO Discover Alloy Handlebar provides a wide and robust base from which to control your gravel bike. Boasting a 20-degree flare they are constructed from 6066 alloy, have a compact shape to their drops and ergonomically designed top sections. Developed for gravel racing and lightweight bike packing adventures they are available in 40, 42 and 44-centimetre widths, the narrowest of which tip the scales at 270 grams. They also boast semi-internal cable routing and were designed to complement Shimano s GRX gravel components.Gravel racing and lightweight bike packing handlebars6066 alloy constructionLightweight and robustCompact design to the dropsErgonomic top sections for improved comfortDeveloped compliment Shimano GRXSemi-internal cable routingFlare: 20-degreesSizes: 40 and 42 cm widthsWeight: From 270g31.8mm clamping diameter
This Race Face Atlas riser bar is manufactured from cold drawn, seamless Air Alloy material with an internal taper to increase its strength and durability without adding weight. The updated ultra-low and ultra-wide riser geometry reduce cockpit height to lower the front end (bike’s crown to axle height).
Constructed from a cold-drawn 7075 aluminium, the Race Face Atlas handlebar brings you responsive and controlled performance on every outing, with comfortable backsweep and upsweep angles letting you twist and turn from section to section with ease. Featuring a thick 35mm centre section and an impressive 820mm width (cuttable to 770mm), it's perfect for riders with a larger reach and an adventurous attitude.
Park Tool Threaded T47 Guides for BFS-1The Threaded T47 Guides for BFS-1 from Park Tool are ideal for use as a guide when repairing (facing) damaged threads on your frame threaded bottom bracket shell. This guide is compatible with Park Tool Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1) tools and is compatible with Drive Side (left-hand threading) bottom bracket shells.The 648L is a T47 (47mm x 1.0) left-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is for use on the drive side (right side) of the bike. This side of the bike drive uses counter-clockwise or left-hand threading.NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.Features: Ideal for facing bottom drive side (left hand threading) bracket threads Compatible Park Tool Products: Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Threaded T47 Guides for BFS-1The Threaded T47 Guides for BFS-1 from Park Tool are ideal for use as a guide when repairing (facing) damaged threads on your frame threaded bottom bracket shell. This guide is compatible with Park Tool Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1) tools and is compatible with Drive Side (left-hand threading) bottom bracket shells.The 648L is a T47 (47mm x 1.0) left-hand threaded standard guide for use when facing bottom bracket shells with the BFS-1 Bottom Bracket Facing Set and 690-XL Oversized Facer. This guide is for use on the drive side (right side) of the bike. This side of the bike drive uses counter-clockwise or left-hand threading.NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.Features: Ideal for facing bottom drive side (left hand threading) bracket threads Compatible Park Tool Products: Bottom Bracket Facing Set (BFS-1); Bottom Bracket Tapping & Facing Set (BTS-1)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.
The DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.7075 heat treated and double butted Alloy31.8mm or 35mm clamp size780mm or 800mm width20mm/35mm rise options5 degree upsweep8 degree backsweepThe DMR alloy MK4 wingbar's shape was developed with their team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or droopy and the 8 degrees backsweep is optimal for stand-up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.