Pack of 50 Halo 7075 alloy nipples. These nipples are forged from high quality aluminum with a precision CNC machined finish. ###section### Product Specs TYPE: N/A MATERIAL: Alloy PACK SIZE: 50 NIPPLES: N/A WEIGHT: TBC
There's nothing to make stealing an unlocked wheel quicker and easier than a conventional QR skewers as no tools are required.Hex Bolt skewers can slow a thief down, as they will need a conventional Allen key to release the wheel. However, the new Halo Security skewer adds an extra level of awkwardness for any thief looking to steel your unlocked wheel, as they will need an Allen key with a hole in the centre to accept the additional security pin. These exist in specialist tool shops, but are not a common item.For your convenience, each Halo Security Skewer includes a Hex pin tool for your home tool box, and we’ve added a security hex pin tool onto a attractive anodised alloy key ring fob (which importantly includes a bottle opener too).Skewers are available in 3 types:Front Standard (156mm rod).Fits:Standard QR type hub with 5mm internal skewer clearance.,Over Locknut Dimension of 100mm.,Dropouts up to 8mm thick..Rear Road Standard (188mm rod).Fits:Standard Road QR type hub with 5mm internal skewer clearance.,Over Locknut Dimension of 130mm.,Dropouts up to 9mm thick..Rear MTB standard or XL Road (192mm rod).Fits:Standard MTB QR type hub with 5mm internal skewer clearance.,Over Locknut Dimension of 135mm.,Dropouts up to 8.5mm thick..OrXL Road QR type hub with 5mm internal skewer clearance.,Over Locknut Dimension of 130mm.,Dropouts up to 11mm thick..
If a wheel slippage problem is something that you need to kill-off, then Halo's all new Butch-washers with their sharp cut teeth, force multiplying design and butch, non-bending, heat treated, 4mm thick steel bodies are the 'no messin' about' answer for you..Halo Butch Design Functions:Force multiplier design increases the force applied by 30%.,(3mm grip face Vs 4.5mm nut face.),Smooth Nut face reduces tightening torque friction. ,Sharp cut teeth 'bite' into any surface to provide maximum grip..Tech:4mm thick hardened Cr-Mo steel body (resists bending.) ,10.2mm clearance hole (fits 3/8" and 10mm axles) ,20mm outer diameter grip-face (fits into most dropouts.) ,Black Oxide finish (suits most applications).
Our Carbaura RC wheelsets have been designed to keep you one step ahead of the competition.Built around an optimized, Computational Fluid Dynamics tested, aerodynamic profile in a Carbon Fibre chassis, low weights, linear compliance and lateral stiffness were our primary aims with the Carbaura RC wheelsets.The tried and tested 19mm internal and 25mm external rim widths allow you to run a choice of traditional or tubeless tyres and are well suited to tyres ranging from 25c through to 35c widths to deliver enhanced comfort and grip.To improve braking performance and rim durability on tough alpine descents, the braking surface has been finished in a 1.5k weave to dissipate heat throughout the carbon structure faster to dramatically reduce temperature build up.Hand crafted with lightweight bladed aero spokes to decrease resistance and widely spaced hub flanges the Carbaura RC wheelsets have been built to reduce any possible lateral flex and increase power transfer. The rear wheels uses a 16/8e lacing pattern to balance spoke tensions and withstand torque forces from centre of the wheel whilst the front wheel uses radical lacing to reduce weight and drag.Our RS Front and RS 6Drive hubs use fully sealed EZO bearings for year round longevity. The RS 6Drive hub uses 6 individually sprung reversed pawls, mounted into the hub shell, that simultaneously engage into the 30-point freehub driver for positive torque transfer.Available in two depths, 35mm, a lower inertia option great for undulating courses, and 50mm, a more aerodynamic option for flatter routes.Included FittingsFront: 100 x 9mm QR,Rear: 130 x 9mm QR.SpecificationsSpokes: Halo Black Aero Racing Stainless spokes ,Nipples: Halo Red Alloy nipples ,Rim Depth: 30 or 50mm,Internal Width: 19mm,External Width: 25mm,Front Hub Spacing: 100mm,Rear spacing: 130mm,Drillings: 20H Front, 24H Rear,Freehub: Shimano HG and Campagnolo versions,Drive System: 6Drive,Freehub Body: Alloy,Spoke pattern: Radial Front, 16/8e Rear,Recommended Tyre size: 25-35c,Colour: Raw UD/1.5k Carbon.
Special pads to suit Carbaura Carbon road rims3 types availableCampagnolo pre 2012 ,Campagnolo 2012 and onwards,Shimano.SpecificationsColour Grey.
0.8mm Cassette SpacerGold: Needed to fit some 10 speed road cassettes to a standard 10 speed freehub.,Steel..1.0mm Cassette Spacer Black: Needed to fit some 10 speed MTB cassettes to 11spd freehub spacer.,Cut-out for rivets.,Steel..
The Chaos is part of Halo's new generation of clean welded joint rims. Sam Pilgrim chooses them for Dirt Jumping and they are also great Downhill Race rims.This rim, like Sam, will always cause some Chaos. A lightweight rim with a full blown heavyweight punch.Light enough to win dirt comps at the highest international levels, but yet tough enough to handle full-on DH courses.Heat treated extruded aluminium.20mm deep semi-Aero section28mm wide.Stainless Steel spoke eyelets.Clean welded joint.Disc use only.ERD 538mmWeight: 580gWhite powder coated or Shot blast and Black anodised and New Ltd Edition Anodised Blue 32H.
Chaos Rim - 27.5"The Chaos is part of Halo's new generation of clean welded joint rims.Sam Pilgrim chooses the 26" versions and they helped propel him to becoming the 2013 FMB World Tour Series Champion.They are also great Downhill Race or Enduro rims as well as being equally at home on Trail Centres for those riders looking for strength and performance.This rim, like Sam, will always cause some Chaos.,A lightweight rim with a full blown heavyweight punch.,Light enough to win dirt comps at the highest international levels, but yet tough enough to handle full-on DH or Enduro courses..Recommended Spoke Tension:Front and Rear: 100 to 135Kgs.SpecificationsMaterial Heat treated extruded aluminium,Drillings 32H,Eyelets Stainless Steel,ERD 562mm,Joint type Clean welded,Colour White powder coated or Shot blast and Black anodised,Dimensions 28mm wide, 20mm deep,Weight 524g.
Traverse, climb and descend. Our Chaos Enduro and DH race wheels are at home on the slopes of downhill tracks, climb comfortably between stages at any Enduro race and are now tubeless compatible.Chaos wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive, MT Supadrive DH and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.The Chaos Enduro wheelset is also available with the option of a MT 6Drive, for a quieter 30 click drive.Included FittingsFront Standard: 15mm x 100 thru, 9mm x 100 QR,Front Boost: 15×110 thru,Rear Standard: 12mmx142 thru, 9mm x 135 QR,Rear Boost: 12mm x 148 thru,Rear Super Boost: 12mm x 157 thru,.SpecificationsSpokes: Black double butted stainless spokes,Nipples: Black ED coated brass nipples,Rim Depth: 20mm,Internal Width: 22.5mm,External Width: 28mm,Front Hub Spacing: 100mm or 110mm Boost versions,Rear spacing: 135/142mm, 148mm Boost and DH150mm versions,Drillings: 32H,Disc Mount: IS 6-Bolt,Recommended Tyre size: 2- 2.5”.
Top quality screw-on Freewheels for the discerning single speed rider that wants super quick pick-up...High strength Cr-Mo body and cog.,CNC 3/32" Cr-Mo teeth (can accept 3/32 or 1/8" chains).,6 pawls system.,72 point pick-up.,1.37"x 24T Standard R/H threaded.,Body features "EZ-off" 4 dog tool removal slots. ,Black Oxide finished..SpecificationsMaterial Cr-Mo,Chain Compatibility 3/32,Threads 1.37 inch x 24 tpi,Colour Black,Weight 164g (16T), 172g (17T), 176g (18T).
Combat 2 free hub body,For Combat 2 Disc Hub (Marked C2),HG Compatible.
Combat Disc, Front - Forged and CNC alloy. Standard bearing. QR M9 axle, Front Disc hub with standard loose ball bearingsSpecificationsMaterial : CNC Aluminium,Drillings : 36H,Bearings : Loose Ball Bearings,Axle : QR,Spacing : 100mm,Disc Mount : 6 Bolt,Dimensions : C-L 22mm, C-R 35mm, Flange 58mm,Colour : Black,Weight : 260g.