TA 110 PCD Zephyr Middle Road ChainringTA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth on this model are cut in the traditional manner on a lathe, producing a superior and more precise tooth form than pressing which is used by most chainring manufacturers. This technically advanced model features computer generated tooth profiles for superior power transfer and prolonged drivetrain life. Thanks to its stainless steel pick-up pins and machined shifting aids on the middle and outer rings you'll benefit from the smoothest changes possible on 9 and 10 speed systems. This is the perfect choice of upgrade or replacement for fast and precise gear changing.Features Material: 7075 T6 heat-treated Aluminium Alloy Compatibility: 9/10 speed BCD: 110mm Less friction more wear resistance Laser Engraved Anodised and polished finish for long life & corrosion resistance Smooth shifting Marked to indicate correct chainring orientation Compatible with road compactBuy TA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Direct Mount Oval ChainringRace Face’s tough and hard-wearing Direct Mount Chainring will help you to dominate the toughest trails. Made from 7075 aluminium and enhanced with Race Face’s renowned “Narrow Wide” teeth, it's ready for all the abuse the trail can dish out and will keep your chain held in place as you power over the roughest sections. Compatible with all Cinch cranksets, the direct mount design means you can install it with minimal effort and get back to riding in no time.Features: Material: 7075 Aluminium Speed: 1x9, 1x10 and 1x11-Speed Bolt Circle Diameter (BCD): Direct mountCompatibility: Race Face Cinch cranksets Shape: OvalUse: Cross Country (XC), Trail, All-Mountain (AM) and EnduroNarrow Wide tooth profile provides unbeatable chain retention Weight: 72g (32T)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Ultegra 6701 10 Speed ChainThis 10 Speed Chain from Shimano has been designed for use with 10 Speed Hyperglide drivetrains. It has been engineered to improve efficiency and power between your cassette and chainset and features and is incredibly lightweight, so you can benefit from a smooth and effective ride every time. Features:The chain uses a directional design with specifically shaped inner and outer plates to optimise shifting over the chainset and cassetteOuter plate design has been developed to reduce the chance of chain suckThe inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent runningOptimised for 10-speed Super Narrow HG drivetrainsModel Number: CN-6701Links: 116Chain Width: 5.88mmChain Type: Super Narrow HG for 10-speedCassette Compatibility: 10-speedRoller Link Plate: GreySpeed: 10 SpeedUse: Road, Cyclocross, Commuter, Touring. Weight: 267gA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. They used the best materials available, imported from the USA, or Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out perform, and outlast the competition.
KMC's latest breakthrough in rust protection, EcoProteQ treatment doubles rust resistance compared to the Rust Buster treatment. Benefits of the smoother coating are less noise, great performance, maximum rust resistance and a great look. Higher inner plates prevent chain drop.
This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
Made from lightweight aluminium, this chainring offers superior shifting and outstanding durability.
This Race Face Direct Mount Oval Chainring is engineered for aggressive MTB use as it uses its ovalised design to give you impressive and powerful torque on the toughest of rides. It features a hard-wearing 7075 aluminium construction, which makes it perfect at handling all the abuse that's associated with all-day epics in the mountains. Race Face has also equipped this oval chainring with a direct mount profile for fast and easy installation to your ride. Please note: Not compatible with Shimano 12 speed chains.
Shimano Tiagra FC4600 10sp Double Chainrings are compatible with Shimano Tiagra FC-4600 10-Speed double chainsets and other Shimano chainsets with a 5-bolt 130mm BCD bolt pattern.
This Shimano SLX M660 chainring is engineered for the demands of mountain bike (MTB) riding thanks to its tough construction and four bolt pattern. It is a direct replacement for the original chainring that came with your Shimano SLX 9 speed M660 chainset. This is a genuine Shimano spare part. Sold individually.
Fully equipped with a can of Muc-Off Bio Chain Cleaner, capable of 35 cleans from one single tin, the Chain Doc Chain Cleaner is ready to rid your chain of dirt, grime and crud immediately. Simply clip the machine to your chain and spin it through the Doc's body while spraying the cleaning fluid on to your links. Within just 19 seconds, your chain will be spotless and ready for lubing. Turning an essential and arduous chore into a super-speedy job, the Chain Doc Chain Cleaner is a must-have for any rider who regularly gets down and dirty. Directions for use: Step 1 - Position bike upright or mount in a workshop stand. Shift chain to middle front chainring and third smallest cassette for optimum chain tension. Step 2 -Hold the chain cleaning machine in your left hand with your thumb over the spray button and forefinger over the Chain Doc trigger. Position the open Chain Doc over the chain. Step 3 - Pull trigger to close the Chain Doc. Spin pedals backwards for 2 to 3 revolutions while spraying chain cleaner through Chain Doc. Continue for a further 2 to 3 revolutions without spraying. Step 4 - Rinse chain and chain cleaning machine thoroughly with clean, fresh water.