Mounted to the frame using ISCG 05 mounts, the Funn Zippa Lite ISCG05 Chain Guide will be compatible with most modern trail, enduro and downhill bikes and the 26t-36t range makes it perfect for all the popular gear set-ups.
With Diamond Hard Tech one more revolutionary technology has been developed. DHT provides the solidest hardened base with extreme hardness performance and self-lubrication feature. To balance the durability of chain with other derailleur components is an essential task for derailleur parts makers. DHT hardened treatment does not affect the worn condition of cassettes and chainwheel and that friction-free lubrication helps shield away from the strain and wear on the drivetrain components. Thanks to the excellent performance in anti-elongation, chain life has greatly increased based on the DHT advanced durability enhancing treatment. DHT allows TAYA high-end products to compare with the branded chain products in the market with splendid performance in durability.
This chain tensioner kit includes genuine Nukeproof replacement tensioners for the Nukeproof Solum. Featuring a pair for drive and non-drive side, this set is needed to maintain the correct alignment of the rear hubs and chain tension in the Solum frame's single-speed horizonal drop-outs. These tensioners are specifically produced for the Nukeproof Solum and are not cross-compatible with other models and brands.
Compatible with Shimano and SRAM 10 and 11-Speed groupsets, this durable and ultra-precise power meter crankset records your power output thanks to its virtual left and right balance while also being compatible with Zwift training cycling software. The Powerbox SC POD power meter is the next step in FSA’s power meter offering. Featuring virtual L/R balance to estimate total power more accurately it is Zwift compatible via BLE5.0 and has a 450H battery life (it uses a single CR2450 battery). With a precision of more than 99%, this quality power meter gives you accurate power readings. Nowadays, power meter cranks represent a fundamental tool that will help riders track their data directly during training sessions and to be increasingly more competitive on race day. Manufacturer's Part Number: 328-0016743090
This model features high-quality forged 6082-T6 aluminium construction for outstanding durability, so you can conquer everything from tarmac to forest paths comfortably. Additionally, its chainring has been put through a total treatment process which guarantees optimum resistance to wear.
Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring).
Whether you're pedalling around the city or exploring the countryside, this versatile component is designed to give you maximum performance. Equipped with a patented Drop-Stop technology, this model's wide side of the tooth has superior contact on the drive side which spreads the loads and improves chainring life. Its narrow side allows clearance for mud and debris which reduces friction, so you can benefit from a more reliable chain engagement as you move. Compatibility: - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50T are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36T chainring is NOT compatible with these cranks. - Size 42T and larger will work with the Dura Ace 9100 power meter.
This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.
This is a genuine Nukeproof replacement Chainstay/Seatstay Pivot Axle Kit for the Nukeproof Mega AM and TR Frames.
This stunning model's chainring is coated in a special surface treatment which boosts its resistance to wear. Additionally, it features immensely high-quality forged 6082-T6 aluminium construction for outstanding durability. Finally, this is a perfect choice of upgrade for pushing your track performance to the next level.
When applied to the chain, the carrier quickly "searches" its way in between all the pins and rollers of the chain which is where it is needed the most. At this point when the optimum penetration of the chain has been achieved relative to the amount of lube applied at that time, the carrier evaporates, leaving behind the lubricating element which is enclosed in a thin, dry to the touch film which does not allow loose, dry and lightweight contaminants to stick to it. This results in a cleaner and quieter chain. Directions: For top performance, apply to a degreased chain and dry chain. Un-screw nozzle and pierce security seal. Re-attach nozzle and take care to only open the flow valve a very small amount to avoid over application. Then rest the tip of the nozzle on the rollers of the chain and whilst slowly back pedalling the cranks for 2 complete revolutions, gently squeeze the bottle to apply a thin stream of Chain Juice Dry to the chain. HINT! At this point, if it is dripping on the floor you are applying it too quickly!! Because of the way in which Chain Juice Dry works it is best to apply the lube in 2 - 4 thin layers leaving a few minutes between each layer for the penetration and evaporation process to take place.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.