Café Racer's chain for the Fixie Single speeder.Superlight, superstrong, superfast.Lightweight cut-out link plates (inner and outer).Lightweight hollow link pins.Classic Retro profiled shapeStraight plates give minimum chain stretch.½ x 1/8 Inch onlyC/P Silver finish.Weight 255g.
Hardcore use ISIS BB that won't let you down, or rip your frame threads to pieces!Triple Bearing;The large diameter ISIS axles mean that there is limited space for the bearings to fit into the BB area, and so, relatively small bearings have to be used. This Trident unit uses 3 bearings (2 on the drive side) to reduce the load on each bearing and hence lengthen the bearing life.Dip Centre;Many frames have either tube ends, or a non machined centre to the BB shell. This can present a problem for some BB units that do not dip in the middle area… as the BB can risk fouling the inner BB shell during installation, which can result in misalignment, and consequent cross threading of the frame BB threads.The Trident unit does have the required centre clearance for use with most frames without this problem*. (*However, extreme care should still be utilized when installing cartridge BBs to completely avoid this common problem.)Cr-Mo TAF cups;ISIS BB cups have to be produced in a relatively thin wall thickness to allow maximum space for bearings. Lightweight, thin alloy cups run the risk of cracking under hard use due to their lack of base material strength. Further, Aluminium is a relatively soft material, and therefore cups produced in Aluminium can be prone to the delicate threads breaking up on installation and extraction during servicing especially if the frame threads are not 100% clean. This can result in major frame thread problems, as the broken alloy shards can bind further and can eventually cause the frame BB threads to become ripped out also.We specify Forged Cr-Mo cups which are far stronger than their Alumimium equivalents and yet have a similar weight. These TAF Cr-Mo cups with CNC machined threads are far less likely to crack from hard use, or allow their threads to break up during installation and extraction.Trident ISIS BBTriple bearing ISIS BB with reliable TAF forged Cr-Mo cups..
The Merge pedal blends a hard wearing and durable nylon reinforced material with metal pins for optimised performance.SpecificationsPins: Metal pins,Axle: Chromo Axle,Material: Nylon reinforced composite,Bearings: Sealed bearings with DU bushings,Dimensions: 100 x 95 x 18mm,Colour: Black.
Each link overlaps the next, combined with square riveted pins, reduces risk of chain breakage (falling apart)Grind friendly straight outer plate edges, avoid getting hung upCutaway inner plate edges give improved sprocket wrap, allowing perfect running down to 8 teeth sprocketsSlotted plates, reduce excess weightSCM steel with Carburized Nitrogen heat treatment gives breaking strength of 1300Kgf(Std chain is approx 850 Kgf).Gusset's special gold Bling Slink Chain features hollow link pins and cut-away side plates which bring the weight down to a tiny 330g for 102 Links or 360g for the 1/8 Inch verison.
To be the fastest, you want lightweight products, and at 133g the MXR BB is just that.The ultimate in lightweight BBs for BMX 19mm cranksets.CNC alloy cups with English threads. CNC alloy spacers (for 68mm Euro BBs)4 replaceable sealed cartridge bearings.19mm inner diameterBlack - 133g.,
The XD 1-ER has been developed from our vision that riders with XD freehubs may want to go single speed without buying a new freehub. We entered the single speed market early and we know that riders still look for simple and elegant solutions to keep their bikes working in all conditions.Utilising the splines and threaded XD freehub body our XD 1-ER kit is simple to fit and provides a 49 or 51mm chain line depending on the orientation of the suppled 3mm spacer. Going single speed on a modern SRAM equipped bike has never been so easy.This kit is supplied with:16t 5/64’’cog,Steel Splined Flat Sided Spacer,Threaded Cog Carrier,3mm Cog Spacer,6x T25 Torx bolts,.SRAM XD compatible only.17/18/19/20/22T cogs available separately, listed as Disc Mount Fixed Cogs.
New, lightweight, high strength Hex style double wall high-end Dirt rim.Features:Lightweight, Hex shape stylingSuper rigid double box section6061 heat treated alloy with no-weld pin joint, to avoid hot spot weaknessStainless Steel spoke eyeletsOptimised 32 mm wideBlack anodised finishWeight: 505gE.R.D.: 390mm.
If you've got a Campag multiple speed rear wheel and you want to run single speed for a while, just switch the multiple speed cassette for this simple cog and spacer kit. (*and ensure you can either adjust or tension the chain suitably).The large 10mm wide foot on the CNC machined and drilled steel cog spreads the load over a greater surface area than a straight single cog and will significantly reduce the risk of the cog biting into your alloy freehub splines.The superlight drilled, splined alloy spacers are offset to allow a degree of chainline adjustment.Supplied with an 18T cog. (16 and 17T sizes are available separately).Campag 9/10spd hub fitting.CNC machined steel Cog.Superlight drilled cog and spacers.10mm wide foot avoids damage to freehub.Variable chainline offset.5/64" Teeth fits 1-9speed chains..
AM SaddleWith design cues from today’s high end, cutting edge bike designs. The S2 AM is our best looking saddle to date, with unique, premium features designed around today’s rider.We’ve invested in a custom foam base for a unique look and to provide extra pressure relief on long rides. As riders we also ride in the rain a lot, so we also added new rubber Anti-slide™ grip points under your sit bones to improve wet weather performance.FeaturesUnique staple-less, hardwearing fabric top with custom rubber grip points,Custom shaped foam padding with relief channel for extra comfort,Built in shock absorption through the saddle base and rails,.SM SaddleBorn for the new kids on the block. The S2 SM saddle mimics the shape and dimensions of our new unisex AM saddle with the same performance features.The SM features a central cut channel foam base to provide extra comfort and styling.It also shares our new rubber Anti-slide™ grip points with the AM model but with more height to improve wet weather performance and positioning on the bike for little shredders.The SM also works flawlessly for downhill bikes and we’ll have the entire One Vision Global Racing UCI Downhill Team running them along with our entire S2 components range this season!FeaturesSmaller overall length and width for junior riders,Unique hardwearing fabric top with custom rubber grip points,Equally perfect for downhill bikes,.DJ SaddleDesigned in conjunction with our factory rider Matt Jones, we took the new look and feel of our S2 AM and put them into our best ever pivotal dirt jump/slopestyle saddle. Featuring Pivotal stealth technology that tightens through the seatpost and taking the unique rubber Anti-slide™ grip points from the S2 AM saddle and applying them to the nose of the saddle, it provides extra grip when throwing barspins or grabbing it for superman seat grabs. From one of the best riders in the world, to your bike.FeaturesSubtle design with hardwearing fabric top,Custom rubber Anti-slide™ grip points on nose,Pivotal Stealth fitment,.SpecificationsRails: Hollow Chromo (AM/SM), N/A (DJ),Body Material: Nylon Injection Molded (AM/DJ),Cover: Polyurethane ,Padding: Custom shaped (AM),Size: 280 x 140mm (AM), 234 x 133mm (SM),Colour: Black on Black.
Bearing and spacer kit for use with Spanish type direct bearing fit BMX BB systems.Available to suit 19 or 22mm non-shoulder type axles.48.0mm central spacer for 68mm BB shell.Weights: 19mm - 149g / Weights: 22mm - 135g.Axle not included.
4 sealed bearings with steel threaded cups and spacer kit for use with conventional threaded Euro 68mmBB shellSuitable for 19mm axlesAxle not includedWeight: 210g.
High rise urban alloy bars.3mm thick 6061 alloy.3" rise, 5 degree upsweep.6 degree backsweep.560mm wide.130mm clamp area.25.4mm clamp size.Weight: 297g (black version).Colours: Anodised silver, black, red or blue, painted, fluro yellow, or powder, coated white.Includes 25.4mm-31.8mm shims..