ISCG05 CHAINGUIDE – This guide is made specifically for MTB bikes with ISCG05 mount. With simple adjustment with a 4mm Allen wrench, you set the vertical and lateral location of the guide head. The guide head can also be adjust to swing up and out of the way for easy access and maintenance of your Chain/Crank/Ring.Elegant no shim/washer design allows for simple setup with only a 4mm allen wrenchThis guide is made specifically for bikes with ISCH05 mounts. With simple adjustment with a 4mm Allen wrench, you set the vertical and lateral location of the guide head. The guide head can also be adjusted to swing up and out of the way for easy access and maintenance of your chain/crank/ring.• Chainguide for ISCG’05 MTB bicycles• Short 26T-32T Tall 26T-38T• Alloy boom, and inject mold guide head• 4mm Allen wrench to adjust vertical, lateral, and guide head• One extra guide head included
Key Features:This product is a Genuine Shimano replacement part,For XTR and Saint RD-M986, RD-M985, RD-M981, RD-M980 and RD-M820 rear derailleurs.
Nukeproof Avid SRAM X0 Trail Guide Brake Pads (4)The Avid SRAM XO Trail Guide Brake Pads from Nukeproof have been tested by some of the world's most demanding riders. Available in a pack of 4, these brake pads are made from an organic, Semi-metallic and Sintered compound mounted on steel backing plates to guarantee even heat distribution. Incredibly versatile, these brake pads are able to fit all major brake systems. Features: Organic: Good initial bite, Very short bed-in time, Low noise Sintered: High heat resistance, Superior performance in wet and dry conditions, Strong and consistent braking over a wide range of speeds Built For: All-Mountain/Cross-Country/Down Hill/Front Rear Compatible with: Avid Trail, Guide and G2 Series brakes 4 pairs of padsPlease Note: Not compatible with SRAM Guide RE range, for Guide RE brakes see Nukeproof Avid SRAM Code Click HERE for compatibility chartBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:For up to 1-1/4" (32mm) tubes.90-degree no swing design.Cr-Mo Steel construction.
The MRP 1x chain guide is the result of 20+ years of chainguide experience with the help of design cues from its V3 series. This model boasts a stiff and light glass-filled composite backplate alongside a durable nylon upper guide to add major chain retention to your 1x10, 11 or 12-Speed drivetrain for outstanding quality and performance.
Guide RE is SRAM's optimised braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. Guide RE provides real, usable on-trail control-optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. Please Note: The lever on this brake will need to be connected to the brake hose. The hose and caliper are assembled together and pre-bled. Please Also Note: The lever does not come with a handlebar clamp as it is designed to be combined with your gear shifter mount) Reach Adjust Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. MatchMaker and MMX Compatible Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp-a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc. DirectLink SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. PiggyBack Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle. TPC Plus (Timing Port Closure) A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. DOT 5.1 Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Additional Item Top Features: Special Features: Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Technology Highlights: TPC Plus, DirectLink, DOT 5.1 Pad/Holder: Top-loading System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes
MRP 1x CS Upper Chain GuideBenefitting from MRP’s more than 20 years of experience, the 1x CS Upper Chain Guide takes its design from its popular V3 model, bringing you lightweight and robust chain retention on the roughest cross country (XC) trails. The ideal addition to enhance your 1x10,1x11 or 1x12 speed drivetrain, it’s made with a durable composite backplate and silent operating nylon guide for smooth, distraction-free operation. Perfect for combining with narrow/wide chainrings (including oval types) and “clutch” type rear derailleurs, this easy to install component ensures your chains always stays in place, no matter how rough your ride gets.Features:Material: Backplate: Glass-filled Composite; Upper Guide: Nylon with soft interiorFrame Fitment: Separate ISCG-05 (Two-bolt ISCG-05 mount backplate) or S3/E-Mount optionsChainring Size Compatibility: 28-34T range (oval compatible up to 32T)Use: Cross Country (XC), TrailAdds security to "narrow/wide" 1x10/11/12-Speed and SRAM XX1/X01 11/12-Speed drivetrainsCo-moulded "TR" upper guide with softer durometer interior for silent guidanceTracked and grooved upper guide/backplate interface increases stiffness and eases installationPerfect for "clutched" drivetrainsCompatible with chainlines 49mm and widerOval chainring compatibleBoost compatibleNo crank or chainring removal required for installationMounting hardware included and install possible with just a single 4mm Allen wrenchWeight: 40g (ISCG-05 option)Buy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RE Rear Disc BrakeGuide RE is SRAM's optimised braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. Guide RE provides real, usable on-trail control-optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill.Reach AdjustBrake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.MatchMaker and MMX CompatibleSave weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp-a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShoxXLoc and is compatible with XX and X0 brakes. Standard Matchmakeris also available and works with any split-clamp design and RockShox PushLoc.DirectLinkSRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.PiggyBack ReservoirThe brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle.TPC Plus (Timing Port Closure)A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.DOT 5.1Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Please Note: The lever on this brake will need to be connected to the brake hose. The hose and caliper are assembled together and pre-bled.Please Also Note: The lever does not come with a handlebar clamp as it is designed to be combined with your gear shifter mount)Features: Body Material: Forged Aluminium Lever Material: Aluminium - stamped Use: Electric Mountain Bike (E-MTB) Caliper Design: 4-piston, dual diameter caliper Recommended Rotor Type: 1-piece CentreLine (rotors available separately) Brake Pad: Steel-backed metal sintered Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Technology Highlights: TPC Plus, DirectLink, DOT 5.1 Pad/Holder: Top-loading System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Weight: 415gBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
You’ve asked and we’ve delivered. The new 1x CS (Core Series) from MRP brings our 20+ years of chainguide expertise to a new price point. Taking design cues from our class-leading V3 family of 1x guides, the CS model utilizes a stiff and light glass-filled composite backplate and durable nylon upper guide to add major security to your 1x10, 11, or 12-speed drivetrain at minor cost. We’ve tested several backplate material formulations and zeroed in on a proprietary mix that delivers the high level of retention and security befitting the MRP name. Cost has been contained not through any short- cutting when it comes to quality and performance, only by the removal of a few of the bells and whistles found within our premium line.Suitable for all-around trail riding or cross-country and enduro racing, the 1x CS is worthwhile insurance against the dropped chain that could leave you off the back of your group ride or cost you the result you’ve earned. No gimmicks and no janky hardware - just simple, effective, affordable, and proven chain security from the three letters synonymous with chainguides: MRP. Total peace of mind in one piece of hardware.Designed for: Enduro/Trail/XCKey Features:Single Ring 1x10/11/12.,Adds security to "narrow/wide" 1x10/11/12 and XX1/X01 drivetrains.,28-34t range (oval compatible up to 32t).,Boost compatible.,Glass-filled Composite backplate.,Two-bolt ISCG-05 mount backplate.,No crank or chainring removal required for installation.,33g.
Compact bag which converts to a bumbag. Ideal for day trips and carrying essentials.2520 Denier with Teflon coatingMedium capacity fully padded main compartment two external zip pockets for keys and essentialsStraps on two sides for Topeak handy phone pack attachmentBuilt-in padded carrying handlePositive locking QuickClick handlebar bracket with mounting device for cycle computer (Fixer 8)Rain cover included22x13x18cm2L470g
The SG-7.2 cutting guide is a specially shaped guide designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are provided one for standard saw blades and one for thicker carbon specific bladesHardened steel body with moulded contact points to protect tubes and framesMade in the USA and covered by Park's legendary limited lifetime warranty
Replacement Line for Guide Ultimate hydraulic disc brakes.