Suitable for a number of uses, originally designed to convert a top pull frame into a bottom pull, it can also be used as a lower mudguard mounting point for frames without a chainstay bridge, as well as adapting a cyclo cross frame to be able to take two water bottles.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Full length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Narrow Road Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
Clip on mudguards are the perfect option if your frame or fork does not have mudguard eyelets. They are quick and easy to fit and remove. LifeLine Narrow Road Clip-On Mudguard Set features a PET/Aluminium construction making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware.
A classic dirt board design, the LifeLine MTB Clip-On Rear Mudguard fixes quickly and easily to your seatpost to provide protection from muck and spray from the rear tyre. A selection of shims allow the LifeLine MTB Clip-On Rear Mudguard to fit a variety of seatpost diameters from 25.4mm to 31.8mm. A thumb wheel adjuster allows for easy angle adjustment on the fly.
Lightweight, slimline and offering all-round mud control, this mudguard set is easy to mount and fits on virtually all bikes. It comfortably fits any bike with a seatpost diameter between 24mm and 32mm. This makes it great for use on hybrid and trekking bikes, as well as mountain bikes.
The ValveGuard is designed to eliminate the annoyance of valves rattling against the rim of your road bike wheel, it stretches to fit over all types of presta valves or valve extenders. The kit also includes some neat little frame protectors that also reduce the noise of the cables rattling or rubbing against your frame, our goal was to make your ride sound much quieter.
These hand guards are an excellent way of protecting yourself, especially if you ride where there are tight trees or loose branches sticking over the trail. The handguards are the brainchild of Arnaud Vincent who is a World Champion motorcycle racer and keen mountain biker. In 2014 he suffered a crash due to a tree branch hitting his brake lever which made him wonder why handguards have not been used on MTB’s like they are on motorbikes. Sam Hill has been using handguards at home and also at EWS races. These signature handguards have been designed with Sam Hill to form part of his signature range.
Aluminium Bash Plate Made from CNC machined aerospace grade, heat treated aluminium it is both strong and lightweight. It takes the place of the large chainring on single or double ring set-ups, making it ideal for 1x10 or 2x10 drivetrains.
New 3D CNC’d design Material: Lightweight Forged 6061 Alloy 12mm Thick (4.5mm guard) Drilled to 23.8mm with 10mm adaptor Sizes available: 25T Only
This models integrated skid plate protects your chainrings from rocks, roots and literally any trail obstacle that requires you to roll over it. The top of the frame mounting area has a raised fin, which will also prevent the chain from dropping behind the chainring and into the bottom bracket shell area of the frame. If you prefer to run the V2 as a chain guide only, then the skid plate can be removed and the dual pulley chain retention device will still perform to the same high level.
The LifeLine Essential Narrow Road Clip-On Rear Mudguard fixes quickly and easily to your seatpost to provide protection from muck and spray from the rear tyre. A selection of shims allow the LifeLine Essential Narrow Road Clip-On Rear Mudguard to fit a variety of seatpost diameters from 25.4mm to 31.8mm. A thumb wheel adjuster allows for easy angle adjustment on the fly.