This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
This XL-sized fender is specifically designed for compatibility with all front suspension forks and bikes with disc brakes only. It features a soft deformable nose, which is developed to not clog up with mud as you weave your way from trail to trail. Crud has also equipped this full-front mudguard with an easy-to-install design that allows you to fit it to your front fork in seconds without the need for any tools. As a result, it stays in place during the most demanding of MTB rides, while keeping you protected against unwanted spray and dirt. Manufacturer's Part Number: XLF
The Smart Sam is an unbeatable all-rounder and is fully capable on any terrain and on the road, it rolls effortlessly.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Standard Front MudguardReady for the rigours of modern mountain biking, the ProGuard from RapidRacerProducts protects you from spray, mud and anything else your tyres can flick up from the trails. Whether you’re taking on enduro or downhill race or just weekend trail rides, this strap-on front mudguard offers excellent protection.Features: Material: Special polypropylene mix Finish: Soft high gloss finish Length: 494mm Wheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible) 6x Zip Ties included with each guard Indent at fork brace for additional clearance 24 crown holes for a massive range of mounting options Long front to cope with high-speed spray Can be used with any fork travel Snap-off hole covers reduce spray from travelling through unused holes Smaller turn down at front for better tyre clearance and to reduce blockages Rear flick offers even more protection when the wheel is turned Sticker recess offers greater protection for sticker adhesive Seal protection increased with RapidRacer acclaimed seal shield design Crash replacement discount scheme (register at rapidracerproducts.com) Weight: 119g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Schwalbe Smart Sam RaceGuard Mountain Bike TyreThe Smart Sam is the ultimate all-rounder; it features a modern, refined tread design that has been optimised to ensure the central tread provides exceptional rolling performance and comfort while the side lugs guarantee off-road grip and traction, even when leaning far into corners. This tyre is reliable and efficient in all conditions, it even inspires confidence on very wet trails and roads.Features: Compound: Addix Performance, Dual Bead: Wire Skin: Lite Execution: RaceGuard Casing: 67 TPI Inflation Pressure: 30-55 psi Weight: 680gTechnologies: Performance Line: Schwalbe Performance Line tyres are excellent quality for intensive use. They are the best value for money tyres in Schwalbe's range. ADDIX Performance: This compound, although being the best value for money, is still very durable, very versatile and provides excellent rolling performance and grip. Similar to ADDIX Speedgrip, it is a universal compound, suited to most riding scenarios but the main difference being that they are not quite as light or as fast as tyres from the Evolution Line. Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Twin pack mudguard set consisting of the updated Crud and Race guards from CrudCompletely redesigned lightweight front mudguard that fits on the down tube and catches any loose mud that gets flicked up from the front wheel keeping your face and eyes clear of clagEasy to fit to any bike with the supplied fittingsDirect mount where frame bosses availableThe rear guard uses a bracket that fits in under a minute with just a 5 mm Allen keyCatches any loose mud that gets flicked up from the rear wheel and keeps your back cleanEasy to fit to any seat pin with the supplied bracket and shims
For 26' Wheel The DeFender™ front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits MTB 26' tires. ADJUSTABLE Rear angle adjustable MATERIAL Injected molded high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 58.4 x 16 x 8.9 cm / 23” x 6.3” x 3.5” (FX)55.9 x 15.2 x 10.2 cm / 22” x 6” x 4” (RX) WEIGHT 180 g / 6.33 oz (FX)200 g / 7.04 oz (RX) ATTACHMENT (FRONT) QR fork attachment fits ø18 - ø26 mm steerer tube (FX) ATTACHMENT (REAR) QR seatpost attachment (RX)
Full length mudguard set with zink-plated and pre-assembled twin-parallel stays.• Stays slide-in adjustable brackets for an optimal and easy fit• Secu clip “break-away” fittings on front stays avoid blocking of the wheelwhen an object gets between tyre and mudguard• Mudguards are constructed from durable PET plastic• Available in road hybrid and MTB sizes (700c x 35 45mm or 26” x 60mm)
DeFender™ TX is a compact trekking bike fender. Adjustable aluminium struts with QR levers for quick perfect alignment and good tyre coverage. The DeFender™ TX is made of high impact plastic and the highly polished underside prevents dirt buildup. Injected high impact resistant plastic with aluminium struts QR adjustable arms for perfect fit and tyre coverage Rear guard mounts on seat tube with strap Fits tyres up to 700x44c 280g (rear)