The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The Troy Lee Designs Youth Rogue Knee/Shin Guards will defend the knees and shins of young gravity addicts as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce the front of young rippers’ legs while allowing free movement, so that they’ll barely notice they’re wearing a guard. They’ll also be able to cinch it round their leg snugly using two adjustable straps. Perfect for giving downhill stars of the future the confidence they need to ride their best, the Youth Rogue Knee/Shin guard comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer ,Soft, EVA foam inner layer,Two adjustable elastic strips for a secure fit,Sold as a pair, left and right.
Young gravity addicts will love the Troy Lee Designs Youth Rogue Elbow Hard Shell Guards, which will protect their elbow and forearm as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to escape through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your young ripper’s elbow joint while allowing them to move freely, so that they’ll barely notice they’re wearing a guard.A stretchy sleeve of material extends from one side of the pad to the other, acting as a cradle for the inner arm and helping to hold the pad in place. The pad can also be cinched snugly round the arm using two adjustable straps.Perfect for giving youngsters the confidence to ride their best, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
If you’re a gravity addict, the Troy Lee Designs Rogue Elbow Hard Shell Guards will protect your elbow and forearm as you hurl yourself downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to escape through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your elbow joint while allowing it to move freely, so that you’ll barely notice you’re wearing a guard.A stretchy sleeve of material extends from one side of the pad to the other, acting as a cradle for your inner arm and helping to hold the pad in place. You can also cinch the pad snugly round your forearm using two adjustable straps.Perfect for giving you the confidence to ride your fastest, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs Stage Knee Guard offers mid-range protection for heading out to the bike park in confidence. D30® is used for impact protection. It D30® is a soft and flexible guard that is comfortable while riding, but hardens on impact to disperse enegery and keep you protected.Key Features: Packable trail protection,Fitlock compression calve,Slide resistant exterior kneecap,Breathable and wicking chassis,Articulated for optimal pedalling,Mesh rear panel for ventilation,Honeycomb silicone leg gripper,CE EN1621-1 certified D30 impact pad.
The Troy Lee Designs Stage Elbow Guard offers mid-range protection for heading out to the bike park in confidence. D30® is used for impact protection. D30® is a soft and flexible guard that is comfortable while riding but hardens on impact to disperse energy and keep you protected.Key Features: Packable trail elbow guards,Fitlock compression band,Mesh forearm for ventilation,Abrasion resistant exterior elbow,Articulated chassis for optimal movement,Honeycomb gripper,CE EN1621-1 certified D30® impact pad.The Troy Lee Designs Stage Elbow Guard offers mid-range protection for heading out to the bike park in confidence. D30® is used for impact protection. It D30® is a soft and flexible guard that is comfortable while riding, but hardens on impact to disperse enegery and keep you protected.Key Features:Packable trail elbow guards,Fitlock compression band,Mesh forearm for ventilation,Abrasion resistant exterior elbow,Articulated chassis for optimal movement,Honeycomb gripper,CE EN1621-1 certified D30® impact pad.
Featuring lightweight D3O the TLD Raid Elbow Guards are perfect for riders looking for maximum protection with minimal bulk.Key Features: D3O® T5 EVO X lightweight, low profile elbow impact protection,Silicone grippers prevent slipping,Spacer-prene sleeve combined with breathable mesh panel for all-day riding comfort,Durable, abrasion-resistant elbow panel,1x Pair,CE EN1621-1:2012, Level-1 Certified.
The Troy Lee Designs T-Bone Knee Guards are super lightweight and easy to wear protection.A triple layer of stacked protection (EVA, TPR and memory foam) works together offering protection far superior to the weight of the product.T-Bones from TLD will protect your knees when you run out of talent, and give you the confidence to ride at a higher level.Key Features: Molded EVA outer shell with ballistic nylon cover, Knee cup consists of a combination stack of EVA, TPR and memory foam, Ergonomically contoured with 2 elastic Velcro closures and internal silicone grippers, Lightweight and low profile, 1x Pair, CE certified to EN13688:2013.
Troy Lee Designs Rogue Elbow GuardsWhen you're hurling yourself downhill, the Troy Lee Designs Rogue Elbow Guards provide reliable forearm and elbow protection should you find yourself heading for a crash. The rush of downhill mountain biking is hard to beat. But sometimes you'll find yourself pushing your limits a bit too far or caught out by trail features and find yourself crashing. The Rogue Elbow Guards ensure you should avoid bloodied and bruised elbows when that happens.The construction is something you'll be familiar with, mimicking the designs of cycle helmets. This sees a hardshell outer layer, spreading impact forces over a large area to reduce their impact. Meanwhile, a soft EVA foam inner layer absorbs and lessens the force of impacts too. Together, the two layers provide a flexible and comfortable fit that's also highly protective, allowing you to move with ease and enjoy confidence over any terrain.A stretchy sleeve across the middle of the guards provides a secure and snug fit and you also have adjustable straps to let you cinch in the fit for added security. Heat and moisture are able to escape through spaced vent holes to the outer shell while the inner is breathable too. The result is comfort and protection working in perfect harmony. Features:CE certified to EN 1621-1 Level 1 standardVentilated hard shell plastic outer layerSoft, EVA foam inner layerAdjustable elastic straps for a secure fitSold as a pair - left and right specific fitBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs Rogue Elbow GuardsWhen you're hurling yourself downhill, the Troy Lee Designs Rogue Elbow Guards provide reliable forearm and elbow protection should you find yourself heading for a crash. The rush of downhill mountain biking is hard to beat. But sometimes you'll find yourself pushing your limits a bit too far or caught out by trail features and find yourself crashing. The Rogue Elbow Guards ensure you should avoid bloodied and bruised elbows when that happens.The construction is something you'll be familiar with, mimicking the designs of cycle helmets. This sees a hardshell outer layer, spreading impact forces over a large area to reduce their impact. Meanwhile, a soft EVA foam inner layer absorbs and lessens the force of impacts too. Together, the two layers provide a flexible and comfortable fit that's also highly protective, allowing you to move with ease and enjoy confidence over any terrain.A stretchy sleeve across the middle of the guards provides a secure and snug fit and you also have adjustable straps to let you cinch in the fit for added security. Heat and moisture are able to escape through spaced vent holes to the outer shell while the inner is breathable too. The result is comfort and protection working in perfect harmony. Features:CE certified to EN 1621-1 Level 1 standardVentilated hard shell plastic outer layerSoft, EVA foam inner layerAdjustable elastic straps for a secure fitSold as a pair - left and right specific fitBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs Rogue Knee GuardsWith their flexible design and combination of hardshell and soft foam protection, the Troy Lee Designs Rogue Knee Guards keep your confidence levels high when you're enjoying the thrills of gravity-fed mounting biking.The rush of downhill mountain biking is hard to beat. But sometimes you'll find yourself pushing your limits a bit too far or caught out by trail features and find yourself crashing. The Rogue Knee Guards ensure you should avoid brusied nd bloodied knees when that happens.The construction is something you'll be familiar with, mimicking the designs of cycle helmets. This sees a hardshell outer layer, spreading impact forces over a large area to reduce their impact. Meanwhile, a soft EVA foam inner layer absorbs and lessens the force of impacts too. Together, the two layers provide a flexible and comfortable fit that's also highly protective, allowing you to move with ease and enjoy confidence over any terrain.Soft inner padding provides a secure and comfortable fit and adjustable straps let you cinch in the fit for added security. Heat and moisture are able to escape through spaced vent holes to the outer shell while the inner is breathable too. The result is comfort and protection working in perfect harmony. Features:CE certified to EN 1621-1 Level 1 standardVentilated hard shell plastic outer layerSoft, EVA foam inner layerAdjustable elastic straps for a secure fitSold as a pair - left and right specific fitBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs Rogue Knee GuardsWith their flexible design and combination of hardshell and soft foam protection, the Troy Lee Designs Rogue Knee Guards keep your confidence levels high when you're enjoying the thrills of gravity-fed mounting biking.The rush of downhill mountain biking is hard to beat. But sometimes you'll find yourself pushing your limits a bit too far or caught out by trail features and find yourself crashing. The Rogue Knee Guards ensure you should avoid brusied nd bloodied knees when that happens.The construction is something you'll be familiar with, mimicking the designs of cycle helmets. This sees a hardshell outer layer, spreading impact forces over a large area to reduce their impact. Meanwhile, a soft EVA foam inner layer absorbs and lessens the force of impacts too. Together, the two layers provide a flexible and comfortable fit that's also highly protective, allowing you to move with ease and enjoy confidence over any terrain.Soft inner padding provides a secure and comfortable fit and adjustable straps let you cinch in the fit for added security. Heat and moisture are able to escape through spaced vent holes to the outer shell while the inner is breathable too. The result is comfort and protection working in perfect harmony. Features:CE certified to EN 1621-1 Level 1 standardVentilated hard shell plastic outer layerSoft, EVA foam inner layerAdjustable elastic straps for a secure fitSold as a pair - left and right specific fitBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.