Crud Catcher Front Mudguard Seeing as we had updated the Raceguard, we thought we might as well do a number on the Crud Catcher as well. We basically took the futuristic shape of the old ZX Crud Catcher, and crafted a soft nose on it.While we were at it we put some protective cushioning between the frame and the blade, and moved the fixing lugs to accommodate fatter frame tubes. Features: Soft nose. Fits in seconds. Rubber frame pad. Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crud Race Pac Mudguard SetKeep yourself protected from unwanted spray and mud with this Race Pac Mudguard Set from Crud. Featuring a lightweight design, this front and rear mudguard set fits any bike thanks to the supplied fittings making it incredibly versatile. Features: Direct mount where frame bosses availableAll-new rear mudguard with a bracket that fits in under a minute with just a 5mm Allen keyCatches any loose mud that gets flicked up from the rear wheel and keeps your back cleanEasy to fit any seat pin with the supplied bracket and shims Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crud Roadracer Mk3 Mudguard SetKeep yourself protected from unwanted spray and dirt with the Mk3 Mudguard Set from Crud. A redesign of the traditional mudguard, this set features bolted fixings at the brake bridges and/or rigid plastic utilised in the main arc for optimum protection when tackling rough terrain. Crud's Road Racer concept turns orthodox road mudguard designs on their head. The designers at Crud reasoned that if you could float the mudguard off the rim, then you could do away with a lot of the traditional fixings. These mudguards just hover in place so there is nothing to rattle or rub.Features:Hovers in placeNothing to rattle or rubNo tools neededFits bikes with as little as 4mm clearanceFits up to 38mm tyre widthsFits with disc brakesUse: Commuter, Cyclocross, Touring, RoadWeight: 180g (pair)Buy Crud Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Bolt-On Front MudguardThe Mudhugger Shorty EVO is a shorter variant of the Mudhugger EVO mudguard/fender that's compatible with modern mountain bike (MTB) suspension forks.The Mudhugger EVO is designed around the latest Fox 36 and 38's and Rockshox Zeb (not compatible with 38mm offset Zeb) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for Zeb, see options) but still compatible with older (2017) onwards Fox forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Also compatible with Ohlins RXF and Downhill (DH) forks (adapter bracket required, see options). Please Note: For all Downhill forks see the options for FOX and Ohlins DH version. Features: Length: 400mm total - Rear extension 265mm, front extension 105mm Weight: 105g, without fittings Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your Fox forks. For RockShox Zeb and Ohlins an Adapter Pack is required, sold separately Shorty version of the Long EVO More mud clearance No more crown fouling at full-compression Subtle kicker to keep length as short as possible without compromising spray protection 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Hook and Loop Straps with PadsThe ProGuard Hook and Loop Straps with Pads from RapidRacerProducts are Hook and Loop straps plus pads to quickly attach and remove Proguard V2 mudguard to your bike. Features: Pack includes 8 hook and loop straps Mounting Pads Compatible with Proguard V2 mudguards Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Hook and Loop StrapsThe ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike. Features: Pack includes 8 hook and loop straps Compatible with Proguard V2 mudguards Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Funn Zippa Lite Bash GuardThis tough and durable Bash Guard from Funn will ensure reliable protection for your chainring and chain as you cycle over challenging terrain. It features a fully CNC machined Aluminium AL6061 alloy backplate and a 26t-36t chainring size range to cover the most common setups. With this bash guard fitted you can ride your mountain bike through tough trails, without the worry.Features:Use: Mountain Bike (MTB)Material: CNC machined aluminium AL6061 BackplateIntegrates with the Funn Zippa Lite chain guideTough but light backplateReplaceable thermoplastic bumperCompatibility: 2 options for 26T-32T and 34T to 36T chainringsWeight: 65g/68g (approx.)Buy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Replacement Chain Guide BashguardThis replacement bash guard is specifically designed for use with Nukeproof chain guides. Ready for fast and rebellious off-road runs, this model features a polymide construction which makes it more than capable of handling all the sudden knocks and jolts from the trails.Please note: Bolts are not supplied with this model. Replacement bolt kits are available separately.Features: Material: Polymide Use: MTB Compatibility: Nukeproof chain guidesBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
AXA Chain Guard for City BikeThis robust chain guard is equipped for the rigours of cycling. It offers optimal protection for your clothing while also protecting against dirt and moisture in your chain. The result is a reliable guard that will expand the life span of your chain on every ride.Features: Optimal protection of your clothing Protection against dirt and moisture which will expand the life span of the chainBuy AXA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA Yamaha Alloy E-MTB Chain GuardThis electric bike (E-bike) chainring features a hard-wearing alloy construction, which allows it to handle the increased speeds and torque produced by electric motor systems. This model is compatible with Yamaha E-bike engines.Features: Material: Alloy Use: E-bike BCD: 104 Engine Compatibility: Yamaha Part Number: 4713170266768Buy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.