This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
This XL-sized fender is specifically designed for compatibility with all front suspension forks and bikes with disc brakes only. It features a soft deformable nose, which is developed to not clog up with mud as you weave your way from trail to trail. Crud has also equipped this full-front mudguard with an easy-to-install design that allows you to fit it to your front fork in seconds without the need for any tools. As a result, it stays in place during the most demanding of MTB rides, while keeping you protected against unwanted spray and dirt. Manufacturer's Part Number: XLF
The Smart Sam is an unbeatable all-rounder and is fully capable on any terrain and on the road, it rolls effortlessly.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Standard Front MudguardReady for the rigours of modern mountain biking, the ProGuard from RapidRacerProducts protects you from spray, mud and anything else your tyres can flick up from the trails. Whether you’re taking on enduro or downhill race or just weekend trail rides, this strap-on front mudguard offers excellent protection.Features: Material: Special polypropylene mix Finish: Soft high gloss finish Length: 494mm Wheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3" widthFork Compatibility: All forks including Boost (reverse arch forks not compatible) 6x Zip Ties included with each guard Indent at fork brace for additional clearance 24 crown holes for a massive range of mounting options Long front to cope with high-speed spray Can be used with any fork travel Snap-off hole covers reduce spray from travelling through unused holes Smaller turn down at front for better tyre clearance and to reduce blockages Rear flick offers even more protection when the wheel is turned Sticker recess offers greater protection for sticker adhesive Seal protection increased with RapidRacer acclaimed seal shield design Crash replacement discount scheme (register at rapidracerproducts.com) Weight: 119g (guard only)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard V2 Mini Front MudguardThe ProGuard V2 Mini Front Mudguard from RapidRacerProducts is a durable, stylish and low-profile front mudguard that's optimised for use with suspension forks. Plus, it's compatible with multiple wheel sizes with tyre sizes up to 3" tyres and feature integrated fork seal protectors. The ProGuard is an amazing new front mudguard from RapidRacerProducts that's designed for use with disc brake mountain bikes. Offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. This guard is engineered specifically to increase tyre clearance, improve fit, and reduce mud clogging issues seen with this type of mudguard. Plus, this mini option offers a very compact design for all year-round protection and unmatched levels of protection for a guard of this size.The ProGuard range of mudguards have a soft high gloss finish which is a characteristic of the highly polished mould and the special polypropylene mix, this unique mix has been specifically blended for: Cold Weather Strength High Impacts High Flexibility High DurabilityAs a result of achieving the above properties it means that the surface layer is soft and will scratch easily, you must also be careful about putting any chemicals onto the surface as it may tarnish the finish. That said RapidRacerProducts have tested and can recommend the following chemicals to use: Silicone: Spray high quality silicone onto surface and very gently remove with a clean cloth to maintain a high gloss finish and to stop dirt and water from sticking. Bike Cleaner: Non caustic bike cleaners can be used on the ProGuard mudguard GT85/WD40/Solvents: Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike.Optimal Front Cover Protection The front has been made longer than some of the offerings out there as RapidRacerProducts see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Convenient and Durable Snap-Off Hole CoversRapidRacerProducts have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including boost forks (except reverse arch), this allows you to customise your fit.Rear Flick Mud and Spray ProtectionThe rear flick is designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned.Stylish and Easy to Use Sticker Recess The recess down the centre is a nice easy reference to apply coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on the stickers is strong, although it's fair to say that no sticker is able to withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit. Suspension Fork Seal Shield RapidRacerProduct's widely acclaimed seal shield has made it to the proguard as a means of offering greater protection for your seals from high velocity mud and spray, the seal shield section also provides additional strength and rigidity to the rear reducing flex. Zip Ties Included for Simple and Secure Mounting Six cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring four leaving the other two for the fork brace (although more could be added if desired). Features: Dimensions: 386mm long Compatibility: Wheels: 26”, 27.5”, 29” Tyre Clearance: Up to a 3” Forks: All forks including Boost forks (except reverse arch) Fork Travel: Any travel Weight: 85g (without cable ties)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Best protection with high luminosity! The NIGHTBLADE MTB mudguard for the rear wheel is an enlightening example of integrated bicycle solutions. It not only provides optimal splash protection the NIGHTBLADE also ensures greater safety in road traffic from the integrated rear light. The rear light with integrated rechargeable battery can be removed and charged with a USB connection. The rear light with the integrated battery can be removed and can be recharged using a USB connection. The spoilers of softer plastic serve as edge protectors when getting on or off the bike. The simple quick-release mounting system enables the NIGHTBLADE to be mounted on almost all seat posts using power straps and the 2-joint technology enables them to be optimally adjusted to mountain bikes. The mudguards are suitable for mounting with 26‘, 27.5‘‘ and 29‘‘ tyres.
SKS Nightblade Clip-On Mudguard With LightThe SKS Nightblade mudguard features a wide mudguard design that's ideal for mountain bike (MTB) riding. It has a clip-on attachment that makes it easy to remove for cleaning and it's equipped with an integrated rear light to ensure other trail and road users are aware of you cycling ahead of them. This rear-mounted mudguard it a superb addition to your MTB and protects your back from mud, spray and water while aiding visibility in low light and bad weather conditions.Wide Rear Mudguard with Integrated LightBest protection with high luminosity! The Nightblade MTB mudguard for the rear wheel is an enlightening example of integrated bicycle solutions. It not only provides optimal splash protection the Nightblade also ensures greater safety in road traffic from the integrated rear light. The rear light with integrated rechargeable battery can be removed and charged with a USB connection.Easy to Fit and Adjust Quick Release Mounting SystemThe simple quick-release mounting system enables the Nightblade to be mounted on almost all seat posts using power straps and the 2-joint technology enables them to be optimally adjusted to mountain bikes. The mudguards are suitable for mounting with 26", 27.5" and 29" tyres.Features: Material: Plastic Part.No.: SKMNBLA29 Wheel Size: 26", 27,5" (650b) Tyre Width: 3.0" Length Rear Fender: 550mm Weight: 265gBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The All New Onguard Neon Range. The DS system is an innovative leap in design,introducing significant features and benefitsover existing locking systems and cylinders.The worlds first spring free patented lockingsystem and cylinder.No more jammed locks
RIDECAMP is your simple sleek and effective choice for cross-country and light-duty ride needs. Features Lightweight slip-on sleeves. Pre-curved chassis for attack position. Lightly padded nylon anti-abrasion outer skin. Fully perforated neoprene chassis for breathability. Tacky silicone elastic webbing to prevent slippage. Fully ventilated rear mesh for maximum cooling. CE Directive 89/686/EEC MTB.
Designed for bikes with mudguard eyelets, the M Part QF Mudguards offer excellent coverage in an incredibly quick and easy to fit package. The clever design allows you to remove the fenders and stays quickly when the rain clears.Suit for bikes with eyelets and 700c tyres up to 28mm wideFenders and stays can be quickly removed if the rain clears3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableRubber tail helps to protect riders behind youIncredibly easy to fit, the fenders and stays can be quickly removed, perfect for the rare occasions the sun makes an appearance in winter! The durable stainless steel stays and fittings are incredibly durable and will shrug off the worst the winter weather can throw at them. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part QF Guards are tough, versatile and incredible value.