Description for Demolition Axes Guard Sprocket Flat Black / 25T not available
The Teratec is designed with the principle of right materials, in all the right places. With sleek slip on sleeves, pre-curved chassis for attack position, moderately padded with nylon anti-abrasion outer skin, tacky silicone elastic webbing to prevent slippage, fully ventilated rear mesh for maximum cooling. Impacted tested with level 1 protection.
Going back to the beginning of Demolition (2000) for this re-issue. Classic Lightning Logo CNC’d and now available as a 7075 aluminum guard sprocket. Two bolt drive holes for added life! ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 1lb
Replacement guard for the Shadow sabotage sprocket. ###section### Product Specs TYPE: N/A MATERIAL: Nylon WEIGHT: 100g
The Kink Eastman full guard sprocket was designed to take a beating, and it’s built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths which give the Eastman sprocket maximum compatibility. It’s technical design creates a clean and symmetric aesthetic, and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 150g / 5.3oz
Made in USA from CNC machined 6061 Aluminum. 1/8″ teeth, 15/16″ (24mm) center bore, 19 and 22mm steel hat washers included. Compatible with 19mm, 22mm and 24mm spindles. Features 2 crank mounting holes.
Made in the USA from CNC'd 6mm thick 7075 aluminium. This is the new one-piece guarded version of the Key sprocket. Made with input from Ben Lewis to protect you chain during crooks or slide nicely when in a crank arm grind. Features 4 sprocket bolt holes and new teeth design for better chain engagement and longer life. Comes with top hat washers to fit any cranks ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 130g / 4.6oz
The Abyss Guard Sprocket use a unique 5 spoke design with strengthened arm and subtle cutouts to reduce the weight. CNC machined from superior grade 7075-T6 alloy for increased life and is available in 25t and 28t. The Abyss is specifically designed to be compatible with every crank on the market and is supplied with sunken adaptors so it can be run on 24, 22 and 19mm spindles to maintain a perfect chain alignment on all setups. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 25t: 126g (4.44oz/ 0.28lbs). 28t: 154g (5.43oz/ 0.34lbs)
The Elevate Guard Sprocket is Eclats new team designed guard sprocket, which uses the same Viper nylon fiberglass bash guard and patented interface that made theAK guard a success. One of the major design elements that has made this guard such a trustworthy and robust product, is the way that the Nylon guard is attached to the sprocket. Instead of sitting on the surface of the alloy sprocket, the Nylon guard is sunken into the structure of the sprocket and supported all the way around so that the bolt holes on the guard do not take all the impact. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations. ###section### Product Specs TYPE: Bolt On MATERIAL: 6061-T6 alloy, full cnc sprocket and nylon/fibreglass replaceable guard WEIGHT: 25t: 150g (5.29oz)
Guard sprocket from Saltplus. The Orion guard sprocket is CNC machined from 6061-T6 aluminum and 2 rotation points ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 161g / 5.7oz
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Felix Prangenburg's signature sprocket is now available with a bolt-on Alloy bash guard, with a strong sprocket bolt interface, including 4 hollow sprocket bolts for attachment. Felix went to WTP with a unique idea for a sprocket which was much thicker than anything else we had done before. we were instantly stoked on the idea and worked with him to make it a reality. The Pathfinder sprocket is 8mm thick and uses a unique 9 sided design that allowed us to integrate the sprocket mounting location into the spoke pattern, resulting in a super clean looking sprocket with plenty of strength and longevity even for the most savage rider out there ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy with Nylon Guard WEIGHT: 104g / 3.66oz