Key Features:Triple density gel grip,Ergonomic shape spreads the load across the palm for maximum comfort,Indents fit thumb and fingers for grip,Comes complete with bar end plugs,Weight - 140g pair.
Ride At Your BestThe new KEO 2 Max is the best product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Carbon,Axle: Chromoly +,Pedal Stack Height + Cleats: 17,3 mm,Contact Surface Area: 500 mm² ,Float: 8 or 12 adjustable spring,Cleats: Kéo Grip Cleats,Pedal Weight: 125 gr (312 gr per pair with cleats and screws),Accessories: A pair of Grey Kéo Grip cleats + screws,Guaranty: 2 years.
The Lizard Skins Dual Compound Logo Grips use two different rubber compounds. Medium diameter grip - to suit medium sized hands.Colours: Black, Blue, PurpleMaterial - Dual CompoundLength - 130 mmDiameter - Medium.
Graphic tattoo by Californian Master Mike Giant and the sensational softness of Velvet ribbon now available with multi-density grips. Sealing rings made of anodized Aluminum and customized with Cinelli logo.* Material: Syntetic tape - multidensity grip* Internal diameter: 22,4 mm * Length: 129 mm* Finishing: Black Velvet - Red Velvet.
A one-piece replacement brake block with a cantilever stud fitting.Key Features:High performance, long life compound offering you squeal free power even in the most adverse weather and trail conditions,Can be used onmost cantilever-style brakes and some U-Type brakes,Post style fixing can also be used with any V-type brake that requires a stud type fixing, such as Shimano STX..
Alloy bodied, large platform pedal for stability and comfort,Kraton top for enhanced grip without any pins,Ideal for E-bikes,9/16 inch thread.
Key Features: Technology: Flat Pedals + Look Activ Grip By Vibram,Body: Composite,Grip: Vulcanized Rubber Activ Grip + Composite Studs,Spindle: Chromoly +,Surface Area: 107x103 mm,Q Factor: 63 mm,Weight (Pedal): 265 G,Weight Pair: 530 G .
Key Features: Technology: Flat Pedals + Look Activ Grip By Vibram,Body: Composite,Grip: Vulcanized Rubber Activ Grip,Spindle: Chromoly +,Surface Area: 107x103 mm,Q Factor: 63 mm,Weight (Pedal): 265 G,Weight Pair: 530 G .
Ideal for use on carbon fibre handlebars, stems and seat posts, the carbon assembly paste is a specially formulated blend of highly refined natural oils and ultra-fine non-slip pumice particles, designed to eliminate slip between carbon fibre components.Gripper paste increases the friction between carbon fibre components and their mating surfaces, so reducing the torque required to clamp them.The non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions.Key Features:For use on carbon fibre handlebars, stems & seat posts.,Eliminates slip on clamped parts & Prevents seizing.,Made of renewable, natural oils and pumice particles.,Readily Biodegradable.,100% PCR & PIR Recycled Packaging.,M15 threaded cap..
The DMR Death Grip is the second collaboration between DMR bikes and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendans design around it in super-soft Kraton compound. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the Death Grip is what we ended up with!’ Brendan FaircloughKey Features:Tapered Core | No need for outer lock ring,Waffle and Knurl for grip,Mushroom for comfort,Available in Thin (ø29.8) or Thick (ø31.3),Available in Soft (20A Kraton) or Hard (25A Vexk).
The Thrice grip borrows the same integrated 1 piece clamp and tapered core as our proven Slater grips, which keep both the weight and price down. It's packed full of technical features and a soft gel compound to ensure complete bar control and ultimate comfort. First, we utilized a half mushroom profile for palm comfort. Next, we added our proven circular icon dampeners to disperse shock and vibrations. And finally, we incorporated our ramped and undercut saddle icon to aid in finger traction, which reduces any hand slippage in the toughest conditions. The Thrice has an ovalized shape and is offered in two different diameters to ensure the right fit for your hands.Key Features: Integrated 1-Piece Lock-On: Technologically advanced in-moulded collar lock-on design with a stainless steel bolt allows for a clean interface and provides industry leading weight reduction from traditional alloy ring constructions., Dual Density Design: Firm inner core stabilises the grip, providing ultimate control, while the plush gel-based TPE (Thermo Plastic Elastomer) compound is precisely formulated to provide a supple feel and long lasting durability., Tapered & Slotted Inner Core: The internal diameter core tapers gradually towards the end of grip and features strategic cutout slots to contact the bar for unrivalled, non-slip mount security., Ovalized Profile: Full Ovalized design allows for maximum grip control in comparison to standard "round" shape grips., Half Mushroom Construction: Extended length, collapsible ribs offer immediate comfort and all day dampening relief., Ergonomically Ramped & Undercut Grabbers: Engineered for in class traction, which feel natural to the fingertips and also aid with power in the pulling motion when standing upright to pedal., Circular Icon Dampeners: Time tested and proven Icons are recessed, while the outlined circles are raised on the front side of the grip to fully damp vibrations and reduce numbness, while offering a well-balanced blend of comfort and grip., Flared Outer Ends: Allows support for the outer palm when pushing into corners, without any sharp edges or rings.,.Specification: Length - 136mm., Diameters - 31mm / 33mm., Weight - 39g (31mm) / 48g (33mm)..
A icon returns. In 1997, the Marzocchi Bomber Z1 burst onto the scene and bucked all contemporary trends. The flavours of that decade included rubber springs and feathery weights. The Z1 brought oil, coils and massive stanchions - it unapologetically prioritized grip and ride quality over just about everything else. The return of Z1 brings back these same priorities in a robust 6000-series alloy 36mm chassis with a super plush air spring and proven GRIP damper.Key Features:36mm single crown chassis with new Marzocchi Bomber Z1 lower legs.,EVOL air spring with adjustable volume.,FIT GRIP Sweep damper with adjustable compression and rebound damping..Specification:Stanchion: 36mm.,Travel: 140-170mm (29") / 150-180mm (27.5").,Air Spring: EVOL.,Damper Options: FIT GRIP.,Axle Options: 15QR x 110mm.,Steerer: 1.5 Taper.,Colour Options: Matte Black..