Protective. But lightweight. The aim of the Valegro Road Cycling Helmet (WG11) was to engineer a helmet with optimal levels of ventilation but without compromising on safety. To achieve this aim the Valegro is made using patented MIT Technology. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without affecting strength and protection. With its highly vented design, air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head-to-pad contact reduced by 70% facilitating even more airflow to your scalp, and keeping you cooler as you turn up the power. WG11 Safety Test The Valegro also exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike. Kask Octo-Fit The Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible. Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness.
No detail was missed out in the creation of the precisely engineered aerodynamic design of the Utopia (WG11) Team Ineos Grenadiers Road Cycling Helmet. When winning margins can be so small and a fast-riding bunch always a place where crashes can happen, Kask looked to create a helmet with the very finest balance between raw speed and unrivalled safety. Fast performance Using wind tunnel testing and computational fluid dynamics (CFD) simulation, Kask have been able to develop a helmet with impressive aerodynamics while retaining incredible ventilation and safety. Compared to the competition the Utopia resulted in a saving of up to 6 watts when riding at 50kph. It may not sound significant but every little bit of saved energy is vital when going for the win. While aerodynamics was the primary concern, Kask didn't overlook ventilation. Using the data from their testing the design and engineering team have been able to optimise airflow so that you can use the Utopia all year round, even in warmer conditions. The design also means reduced draught noises as you ride. WG11 Safety Test The Utopia Helmet meets the stringent WG11 test protocols. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols met, you can be sure the Utopia has you covered should you be unfortunate enough to fall from your bike. Kask Octo-Fit The Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible. Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness.
Weighing just 215g and with an innovative wind-tunnel-tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding Technology KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety Test The Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional padding The special internal padding is based on an innovative multi-layer open-cell construction process, giving maximum comfort and performance. Ventilation holes reduce the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away from the helmet’s outer shell. CoolMax® material padding The front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness. Self-adjusting lateral divider This provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes. Kask Octo-Fit The rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible Chin pad with eco-leather chinstrap The anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.
The Wasabi (WG11) Team Ineos Grenadiers Road Cycling Helmet has been engineered to be extremely slippery through the air, second only to Kask's Utopia in wind-tunnel tests, but its key innovation comes via the ability to tailor airflow and aerodynamics to your ride. Aero. Warm. Cool. You Choose The Wasabi Aero tackles heat regulation via an innovative sliding front panel. This lets you maintain low-drag performance as the pace increases or you can boost or restrict airflow as and when needed. Closing the vent keeps your head warmer during colder weather conditions, ideal for winter training and early-season racing. But pop it open when the heat rises and you have more cooling airflow. Even with the sliding panel open, the drag increase is minimal (with a claimed 1-watt drag increase at 50 km/h). But this helmet isn't just about heat regulation and aerodynamics, your comfort and safety are of course key characteristics too. WG11 Safety Test The Wasabi exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike. Naturally Comfortable Inside the helmet, you'll find pads made with merino wool. These pads are excellent at regulating temperature and wicking away moisture, boosting comfort whatever the weather. And with natural bacterial resistance, itchy scalps and nasty smells are prevented. Kask Octo-Fit The Wasabi uses Kask's super-adjustable Octo-Fit system for a perfect fit every time. A rubberised Micro-Dial adjuster provides easy adjustment with a quick twist. Meanwhile, the floating cradle features contact points and supports designed to oscillate freely through 180°, allowing a secure fit on any shaped head. The Skeletal Brackets of the cradle have been engineered and refined to provide the best fit and support while being as light as possible too.
Fly Pro Team 750ml BottleFeel like you're flying and pay tribute to your favourite team with Elite's Fly Pro Team 750ml Bottle.The Fly Pro Team 750ml Bottle from Elite has an extremely lightweight construction that is squeezable and comes with an ergonomically designed cap which makes drinking from the bottle quick and easy. The bottle also comes with a large opening making it easier to refill and to clean.Features:Wide opening and ergonomically designed capExtremely lightweight constructionSoft and durable plastic designOdourless materialBPA free750ml capacityBuy Elite water bottles from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fly Pro Team 500ml BottleFeel like you're flying and pay tribute to your favourite team with Elite's Fly Pro Team 500ml Bottle.The Fly Pro Team 500ml Bottle from Elite has an extremely lightweight construction that is squeezable and comes with an ergonomically designed cap which makes drinking from the bottle quick and easy. The bottle also comes with a large opening making it easier to refill and to clean.Features:Wide opening and ergonomically designed capExtremely lightweight constructionSoft and durable plastic designOdourless materialBPA free500ml capacityBuy Elite water bottles from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fly Pro Team Bottles 2022 750mlStay hydrated on the trail and rep your favourite team with the Elite Fly Pro Team Bottle 2022 750ml.The Elite Fly Pro Team Bottle 2022 750ml now features a refined compound with more spring, aiding cage retention and avoiding compression from changes of air pressure during high mountain descents. The Fly was born directly out of years of feedback from the world's fastest riders and the desire to create the ultimate lightweight racing bidon. By bringing new materials to bidon construction and pushing mould technology to its very limits, Elite have created the lightest ever bidon, half the weight of the all-conquering Corsa or SuperCorsa. The wall thickness has also been pared down to the absolute minimum, all the while maintaining integrity. Additionally, a stripped down, two-piece cap is light and super-fast to remove with the opening designed to easily take powder scoops, and a simplified, one-piece valve can easily be removed for cleaning.Features:Lightweight racing bidonTwo-piece capOne-piece valveCapacity: 750ml100% BPA freePlease note, Science in Sport sponsors this bottle, which is why it also features the SiS logoBuy Elite water bottles from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fly Pro Team Bottles 2022 550mlStay hydrated on the trail and rep your favourite team with the Elite Fly Pro Team Bottles 2022 550ml.The Elite Fly Pro Team Bottles 2022 550ml now feature a refined compound with more spring, aiding cage retention and avoiding compression from changes of air pressure during high mountain descents. The Fly was born directly out of years of feedback from the world's fastest riders and the desire to create the ultimate lightweight racing bidon. By bringing new materials to bidon construction and pushing mould technology to its very limits, Elite have created the lightest ever bidon, half the weight of the all-conquering Corsa or SuperCorsa. The wall thickness has also been pared down to the absolute minimum, all the while maintaining integrity. Additionally, a stripped down, two-piece cap is light and super-fast to remove with the opening designed to easily take powder scoops, and a simplified, one-piece valve can easily be removed for cleaning.Features:Lightweight racing bidonTwo-piece capOne-piece valveCapacity: 550ml100% BPA freeBuy Elite water bottles from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Utopia (WG11) Team Ineos Grenadiers Road Cycling HelmetFast. Safe. Comfortable. The Kask Utopia (WG11) Team Ineos Grenadiers Road Cycling Helmet has them all - engineered to pass the WG11 test protocols for safety, it keeps you protected from direct and rotational impacts while also giving sleek aero gains too. Kask set out to create a cycle helmet suited to the high speeds of World Tour racing and to be worn by riders of the Ineos Grenadiers as they took on Grand Tours and Classics. Smooth airflow and excellent ventilation were seen as key drivers of the design. The result is the Utopia (WG11) Team Ineos Grenadiers Road Cycling Helmet.Smooth performanceUsing wind tunnel testing and computational fluid dynamics (CFD) simulation, Kask have succeeded in creating a helmet with unrivalled aerodynamics while retaining incredible ventilation and safety. Compared to the competition the Utopia resulted in a saving of up to 6 watts when riding at 50kph. It may not sound significant but every little bit of saved energy is vital when going for the win.While aerodynamics were the primary concern, Kask didn't overlook ventilation. Using the data from their testing the design and engineering team have been able to optimise airflow so that you can use the Utopia all year round, even in warmer conditions. The design also means reduced draught noises as you ride. WG11 Safety TestThe Utopia Helmet meets the stringent WG11 test protocols. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols met, you can be sure the Utopia you covered should you be unfortunate enough to fall from your bike.Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT Technology - full polycarbonate shell coverVents are designed to improve aerodynamics and coolingQuiet riding experience thanks to the reduced windrush close to riders' earsInternal channelling has been redesigned to further improve the aerodynamic capacityUses the easily adjustable Octo Fit adjustment system5mm Resistex® paddingPasses WG11 International Safety Test and CE-EN-1078Weight: 260 g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Utopia (WG11) Team Ineos Grenadiers Road Cycling HelmetFast. Safe. Comfortable. The Kask Utopia (WG11) Team Ineos Grenadiers Road Cycling Helmet has them all - engineered to pass the WG11 test protocols for safety, it keeps you protected from direct and rotational impacts while also giving sleek aero gains too. Kask set out to create a cycle helmet suited to the high speeds of World Tour racing and to be worn by riders of the Ineos Grenadiers as they took on Grand Tours and Classics. Smooth airflow and excellent ventilation were seen as key drivers of the design. The result is the Utopia (WG11) Team Ineos Grenadiers Road Cycling Helmet.Smooth performanceUsing wind tunnel testing and computational fluid dynamics (CFD) simulation, Kask have succeeded in creating a helmet with unrivalled aerodynamics while retaining incredible ventilation and safety. Compared to the competition the Utopia resulted in a saving of up to 6 watts when riding at 50kph. It may not sound significant but every little bit of saved energy is vital when going for the win.While aerodynamics were the primary concern, Kask didn't overlook ventilation. Using the data from their testing the design and engineering team have been able to optimise airflow so that you can use the Utopia all year round, even in warmer conditions. The design also means reduced draught noises as you ride. WG11 Safety TestThe Utopia Helmet meets the stringent WG11 test protocols. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols met, you can be sure the Utopia you covered should you be unfortunate enough to fall from your bike.Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT Technology - full polycarbonate shell coverVents are designed to improve aerodynamics and coolingQuiet riding experience thanks to the reduced windrush close to riders' earsInternal channelling has been redesigned to further improve the aerodynamic capacityUses the easily adjustable Octo Fit adjustment system5mm Resistex® paddingPasses WG11 International Safety Test and CE-EN-1078Weight: 260 g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone (WG11) Team Ineos Grenadiers Road Cycling HelmetBlending smooth aerodynamics and ventilation alongside the safety of WG11 test protocols, the Kask Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet is the ultimate all-rounder for cycling performance and protection. Weighing just 215g and with an innovative wind-tunnel tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding TechnologyKASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell.The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety TestThe Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process, giving maximum comfort and performance.Ventilation holes reduces the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away to the helmet’s outer shell.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes.Kask Octo-FitThe rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head.The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone (WG11) Team Ineos Grenadiers Road Cycling HelmetBlending smooth aerodynamics and ventilation alongside the safety of WG11 test protocols, the Kask Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet is the ultimate all-rounder for cycling performance and protection. Weighing just 215g and with an innovative wind-tunnel tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding TechnologyKASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell.The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety TestThe Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process, giving maximum comfort and performance.Ventilation holes reduces the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away to the helmet’s outer shell.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes.Kask Octo-FitThe rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head.The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.