Introducing the Peaty's x 50to01 Tubeless MK2 Rasta Valves. Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Made in collaboration with 50To01Lightweight & high strength 7075 alloyIntegrated valve core remover cap & spoke keySize: 42mmThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, these valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. Integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. These valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.
With a raised texture, the Lizard Skins Single Sided Lock-On Machine Grips a great grip for those who like a thin grip or who have smaller hands. Lock-On Grips include the grips, clamps, screws and plugs.Soft touch rubberGritty pattern for high amounts of gripComes with clamps, screws and plugs
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The KMC X10 is a high performance and extremely durable chain compatible with 10-speed Shimano and SRAM derailleur systems. The X10 chain is non-directional and weighs from 246g.
The KMC X8 is a high performance and extremely durable chain compatible with 6/7/8-speed Shimano, Campagnolo and SRAM derailleur systems. The X8 consists of 114 links with a pin length of 7.3mm and weighs 324g. The chain is nickel plated and non-directional.
The Hornit Mini Bike Light and Horn is a lightweight, stylish and reliable kids cycle light that features white and green colour light modes and 25 sound effects to keep your little one amused when on two-wheeled adventures.Dimensions: HORN 98mm(l) x 44mm(w) x 36mm(h) 60g / TRIGGER 355mm(l) x 20mm(w) x 9mm(h) 10gBatteries: 2 x AAA batteries 24gWings clip on to fit all bikes and scootersWhite safety lights (12 lumens)Funky green lights (12 lumens)25 sound effectsRemote trigger (no need to take hands off handlebars)IP33 (weather proof)Weight: HORN 98mm(l) x 44mm(w) x 36mm(h) 60g / TRIGGER 355mm(l) x 20mm(w) x 9mm(h) 10gMake sure to hold onto your helmets because this blue and green MINI is off on an adventure. Cycling to school will be the best part of the day as they unleash the sound of their inner wolf or glide like an aeroplane - the MINI really will take them to the next level. If they want to blend in then go with a trusty bike bell, but if they re feeling a little more daring, then why not try the zapper or klaxon for a wilder ride.
Zipp s Service Course range is designed to offer high performance without breaking the bank. The Service Course stem is a great blend of strength, stiffness, reliability, low weight, good looks and a price tag that doesn t make you wince. The redesigned Service Course stem features a new body and faceplate design and is constructed from 6061 aluminium for an improved stiffness to weight ratio, while also offering a sharp new look that syncs beautifully with modern frame designs and integrates perfectly with Zipp s Service Course Handlebars and Seat posts. Available in a wide range of sizes it is easy to get the perfect length for your bike, while the stainless steel Torx T25 hardware is less likely to strip and won t rust over time. A simple stem it may be, but the Zipp Service Course offers a lot in a well-designed and great value package.High Performance Road Bike StemNew Faceplate And Body DesignLightweight 6061 Aluminium ConstructionStainless Steel Torx T25 Hardware31.8mm Handlebar Clamp Diameter+/- 6 Degree RiseSuitable For 1 1/8th Inch Steerer TubesWeight From 150g
The Granite Design Juicy Nipple is a valve cap with extra function! You can use it to remove/install valve core in order to top up tyre sealant, anytime anywhere. The Juicy Nipple comes 7 different colour ways. Colour: Black, Red, Blue, Green, Orange, Pink, GoldWeight: 2.5g (caps in pair) Sold in pairs
The DMR Deathgrip is Brendan Brendog Fairclough s signature grip, with a waffle and knurl design as well as a flange, the Deathgrip is made from soft Kraton rubber for maximum comfort and grip.Single lock-ring design with tapered core means no need for outer lock-ringIncredibly grippy waffle and knurl pattern on outer portionInner mushroom pattern for comfortSoft Kraton rubber for maximum comfort and vibration dampingThe tapered core means no outer lock ring is required while the inner mushroom pattern is great for additional comfort. The grip has been designed to offer maximum grip and excellent comfort, with a waffle and knurled design on the outer portion of the grip, combined with a mushroom pattern on the inner portion to improve comfort. The inner flange is also there to provide additional comfort and protection. Whether you re throwing yourself down the hill at the Redbull Rampage, a World Cup Downhill course or just out for a spin on your local trails, these grips have got you covered.
USE Aluminium extensions are designed to give you a more aerodynamic position on the bike, and are perfect for TT bikes or for normal road bikes and riders looking to get in a more efficient ride position. Using an anodised aluminium construction to give a classy finish that is both strong, durable and light, with weights from just 158g! The extensions also feature a hole for internally routing the shifter cables, leaving you with a clean looking and super aerodynamic setup. If you want the ultimate in aero bar extensions, then look no further!
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
The Mallet E Speed Lace MTB Shoes from Crank Brothers are for Trail and Enduro riders looking for a premium mountain bike shoe that s packed full of great features. These shoes have been designed to take a beating with specific areas reinforced and a padded tongue for extra protection.Outsole:Match Box optimized for any MTB pedalsRamp for easy clip-in / out and mud clearancePre-installed Match Shim for Crank Brothers pedalsPre-installed cleat for Crank Brothers pedalsMC1 mid-friction compound for easy exitDirectional angled & spaced toe / heel lugs for traction while hikingRamped toe for walkabilityStiff shank for power transferCushioned EVA midsole for shock absorptionUpper:Speed lace & strap for fast and secure adjustmentLace pocket for safety and styleVentilated windows with perforated mesh material for breathabilityPadded tongue for protectionTPU reinforced areas for protection and abrasion resistanceHeel dots for grip and superior heel holdHidden eyelets for durability and clean designThe Mallet E Speed Lace has many great features to give you a premium quality mountain bike shoe. The lace system allows for a perfect fit and there s also a padded tongue which adds protection and comfort. There s also TPU specific reinforced areas which gives you protection against debris and abrasion resistance. For added grip in difficult conditions there s directional angled and spaced heel and toe lugs for extra traction. A cushioned EVA midsole for shock absorption and a stiff shank for excellent power transfer gives a great balance between comfort and pedalling efficiency.