The Squadra Stretch Jacket is Castellis entry-level wind jacket, and it has been completely re-engineered to offer a simple and elegant solution than performs even better. The body and the front of the sleeves are now made from a coated ripstop nylon to keep the wind off your core and the most exposed sections of your arms whilst riding. The side panels and back of the sleeves are made from a tightly knit stretch fabric that provides the perfect close-to-body fit and introduces ventilation to the jacket so you dont overheat or get that boil in the bag feeling. A high collar provides some welcome protection for your neck. Reflective details help keep you seen in low light. The jacket packs down small and will take up minimal room in a jersey pocket. Key Features Coated ripstop nylon front and back and front of sleeves Tightly knit stretch panels on sides and back of sleeves High collar Reflective details on chest and lower back 10 18C / 50 64F Weight: 102g (M)
The Squadra Stretch Jacket is Castellis entry-level wind jacket, and it has been completely re-engineered to offer a simple and elegant solution than performs even better. The body and the front of the sleeves are now made from a coated ripstop nylon to keep the wind off your core and the most exposed sections of your arms whilst riding. The side panels and back of the sleeves are made from a tightly knit stretch fabric that provides the perfect close-to-body fit and introduces ventilation to the jacket so you dont overheat or get that boil in the bag feeling. A high collar provides some welcome protection for your neck. Reflective details help keep you seen in low light. The jacket packs down small and will take up minimal room in a jersey pocket. Key Features Coated ripstop nylon front and back and front of sleeves Tightly knit stretch panels on sides and back of sleeves High collar Reflective details on chest and lower back 10 18C / 50 64F Weight: 102g (M)
The Transition 2 Jacket is a mid-weight jacket perfect for those autumn and spring rides where you want to cut the chill but dont want to overheat. The front and sleeves of the Transition 2 is made from the same windproof fabric as Castellis pro-level Gabba but with a fleece backing for greater warm. The back of the jacket forgoes the wind stopping membrane for greater breathability, letting sweat and excessive heat easily escape. All the details are there, from 3 rear pockets that are perfectly sized and placed, a silicone gripper at the waist holds the jersey in place, to a YKK Vislon zipper makes for easy opening and closing. The fit of the jacket is neutral. Neither restrictive like a race cut or loose like a more casual cut. Along with the reflective detailing, this makes the Transition exceptionally useful and wearable on all manner of rides. Key Features GORE-TEX INFINIUM WINDSTOPPER X-Mid front and sleeves for wind protection with exceptional breathability Warmer fleece fabric on back for additional breathability YKK Vislon zipper 3 rear pockets Embossed logo on chest with reflective stripes for visibility Reflective panel below pockets for further visibility 8 16C / 46 61F Weight: 334g (Large)
The Transition 2 Jacket is a mid-weight jacket perfect for those autumn and spring rides where you want to cut the chill but dont want to overheat. The front and sleeves of the Transition 2 is made from the same windproof fabric as Castellis pro-level Gabba but with a fleece backing for greater warm. The back of the jacket forgoes the wind stopping membrane for greater breathability, letting sweat and excessive heat easily escape. All the details are there, from 3 rear pockets that are perfectly sized and placed, a silicone gripper at the waist holds the jersey in place, to a YKK Vislon zipper makes for easy opening and closing. The fit of the jacket is neutral. Neither restrictive like a race cut or loose like a more casual cut. Along with the reflective detailing, this makes the Transition exceptionally useful and wearable on all manner of rides. Key Features GORE-TEX INFINIUM WINDSTOPPER X-Mid front and sleeves for wind protection with exceptional breathability Warmer fleece fabric on back for additional breathability YKK Vislon zipper 3 rear pockets Embossed logo on chest with reflective stripes for visibility Reflective panel below pockets for further visibility 8 16C / 46 61F Weight: 334g (Large)
The Transition 2 Jacket is a mid-weight jacket perfect for those autumn and spring rides where you want to cut the chill but dont want to overheat. The front and sleeves of the Transition 2 is made from the same windproof fabric as Castellis pro-level Gabba but with a fleece backing for greater warm. The back of the jacket forgoes the wind stopping membrane for greater breathability, letting sweat and excessive heat easily escape. All the details are there, from 3 rear pockets that are perfectly sized and placed, a silicone gripper at the waist holds the jersey in place, to a YKK Vislon zipper makes for easy opening and closing. The fit of the jacket is neutral. Neither restrictive like a race cut or loose like a more casual cut. Along with the reflective detailing, this makes the Transition exceptionally useful and wearable on all manner of rides. Key Features GORE-TEX INFINIUM WINDSTOPPER X-Mid front and sleeves for wind protection with exceptional breathability Warmer fleece fabric on back for additional breathability YKK Vislon zipper 3 rear pockets Embossed logo on chest with reflective stripes for visibility Reflective panel below pockets for further visibility 8 16C / 46 61F Weight: 334g (Large)
The 4Forty From Bell is built to withstand the rigors of a trail-riding life; with generous ventilation, the comfort of Float Fit and built-in Sweat Guide, extended rear coverage, a full hard shell and an adjustable visor. Boasting the comfort, protection and broadly capable features of helmets costing twice as much, the 4Forty is a bantamweight, all-conditions, all-kinds-of-trail champion packing a heavyweight value.Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments.15 ventsGoggle Guide adjustable visor accommodates both goggles and glassesNo-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedSweat Guide pad design pulls moisture away from the brow pad and away from eyewearCE EN1078 certifiedConstruction: Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Fit System: Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments. No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedWeight: 15 Vents
The 4Forty From Bell is built to withstand the rigors of a trail-riding life; with generous ventilation, the comfort of Float Fit and built-in Sweat Guide, extended rear coverage, a full hard shell and an adjustable visor. Boasting the comfort, protection and broadly capable features of helmets costing twice as much, the 4Forty is a bantamweight, all-conditions, all-kinds-of-trail champion packing a heavyweight value.Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments.15 ventsGoggle Guide adjustable visor accommodates both goggles and glassesNo-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedSweat Guide pad design pulls moisture away from the brow pad and away from eyewearCE EN1078 certifiedConstruction: Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Fit System: Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments. No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedWeight: 15 Vents
The 4Forty From Bell is built to withstand the rigors of a trail-riding life; with generous ventilation, the comfort of Float Fit and built-in Sweat Guide, extended rear coverage, a full hard shell and an adjustable visor. Boasting the comfort, protection and broadly capable features of helmets costing twice as much, the 4Forty is a bantamweight, all-conditions, all-kinds-of-trail champion packing a heavyweight value.Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments.15 ventsGoggle Guide adjustable visor accommodates both goggles and glassesNo-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedSweat Guide pad design pulls moisture away from the brow pad and away from eyewearCE EN1078 certifiedConstruction: Fusion In-Mold polycarbonate shell - A process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet.Fit System: Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber over moulded dial for adjustments. No-Twist Tri-Glides: Quick-adjust fasteners that help keep straps flat and properly positionedWeight: 15 Vents
Lightweight and strong, the Vector Pro helmet has been designed for MTB use. Featuring 19 openings for effective ventilation, with a reinforced air scoop at the front for additional strength. The Vector Pro offers extended coverage around the temple and nape areas for enhanced levels of rider protection. Other design features include reinforcing cages embedded in the rigid frame for added strength, a quick release chin strap, a fully adjustable dial sizing system, a washable, replaceable and breathable comfort liner with quick-dry anti—bacterial fabric and an adjustable visor, which can be tilted forwards for enhanced vision when riding uphill and has space to facilitate the safe storage of googles. 3 Shell sizes available: S (51-55 cm) / M (55-59cm) / L (59-63cm)
Lightweight and strong, the Vector Pro helmet has been designed for MTB use. Featuring 19 openings for effective ventilation, with a reinforced air scoop at the front for additional strength. The Vector Pro offers extended coverage around the temple and nape areas for enhanced levels of rider protection. Other design features include reinforcing cages embedded in the rigid frame for added strength, a quick release chin strap, a fully adjustable dial sizing system, a washable, replaceable and breathable comfort liner with quick-dry anti—bacterial fabric and an adjustable visor, which can be tilted forwards for enhanced vision when riding uphill and has space to facilitate the safe storage of googles. 3 Shell sizes available: S (51-55 cm) / M (55-59cm) / L (59-63cm)