Campagnolo Ultra Shift Gear & Brake Cable SetAn essential set for your workshop, this Gear & Brake Cable Set from Campagnolo is designed to provide reliable braking performance for your ride. These cables are made from durable stainless-steel inner wires and friction-resistant housings that are lubricated with special grease to reduce wear and tear for unrivalled smooth braking. Features:Complete replacement brake and gear inner & outer cable setPre-lubricated casingStainless steel inner wiresPre-stretchedIncludes, wires, casing, and nipplesMaterial: Stainless SteelOuter Cable Supplied: YesCable Lengths:Front brake inner cable: 1.6mm - 800mmFront brake outer cable: 4.9mm - 580mmRear brake inner cable: 1.6mm - 1600mmRear brake outer cable: 4.9mm - 1250mmFront gear inner cable: 1.2mm - 1600mmFront/rear gear outer cable: 4.1mm - 680mmRear gear inner cable: 1.2mm - 2000mmRear gear short cable: 4.1mm - 325mmBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
XLab Gear Box Bike Repair KitPerfect for repairs on the go, the XLab Gear Box Bike Repair Kit is stylish and space-saving and includes a state-of-the-art clincher repair kit. Easily mountable on XLab's Gorilla and Chimp cages as well as most other cages, the Gear Box can be secured on rear or frame mounted cages with its stylish anti-launch finish. Compact and Carbon-Look Care Box Divided in to two internal compartments for tools and spares, the Gear Box is sound-proofed and padded to make for as noiseless a ride as possible. The Gear Box comes complete with: Tri Tool Kit: 10 double chrome, cold forged tools in a compact easy-to-carry size Hex Key - 2 mm, 2½ mm, 3 mm, 4 mm, 5 mm, 6 mm Open wrench - 8 mm T25 torx Flat screwdriver Silicone band to protect tool kit Speed Chuck Inflator 2 Tyre Levers: Large, no-slip gripFeatures: Capacity: .42 litre Height: 133.5 mm Weight: 447 g (with full kit inside) 65 g (empty)Buy Xlab Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
long life anti-corrosion Single Inner Gear Cable
A single bike storage solution that fixes directly to the wallFoam covered arm adds protection whilst the bike hangs by the front or rear wheel in a vertical positionSolid steel back plate prevents tyre and scuff marks on the wallPowder coated black finish is tough and resists scratchesHeavy duty hardware is included for fast and secure installation; simply bolt the rack to the wall and hang your bike up50 lbs / 22.68 kg maximum capacityInstalled dimensions are 11.5inches / 29.21 cm high 3 inches / 7.62 cm wide and 4.5 inches / 11.43 cm deep
Oak racks come as standard with the fittings to hold two bikes but up to two more bikes can be added using extra kitsVinyl coated arms hold and protect your bike and can be independently adjusted to accommodate many shapes and sizes of frameThe front wheel of your bike can be stabilised with the Velcro straps providedAll assembly hardware is included
The Platinum adjustable wall mount unit is designed to hold one bike of any style Arm assembly rotates to adjust clockwise or counter-clockwise Storage cradles adjust in / out on the storage arms to get the bike as close to the wall as the handlebars will permit Storage cradles feature soft foam padded inserts to protect the bike frame Adjustable design allows for parallel storage of any type of frame - straight tube road bike slant curved or mountain 15.88 kg / 35 lb capacity Assembled dimensions 30.48 cm / 12 inches wide 33.02 cm / 13 inches deep and 12.7 cm / 5 inches high Weighs 2.27 kg / 5 lbs
A folding wall mounted rack for two bikes. Mounts onto a wall and holds two bikes in the horizontal position. Constructed from heavy duty steel with a tough black powder coated finish Folds flat when not in use for space efficiency A handy built in wire storage shelf keeps your equipment neat and tidy Foam covered arms hold and protect your bike Installed dimensions are 12.5 inches / 31.75 cm high 12.5 inches / 31.75 wide and 22.5 inches / 57.15 cm deep Maximum recommended weight of 100 lbs / 45.35 kg All fixing hardware is included and some simple DIY is required
A tidy and efficient hoist that allows you to store bikes and other equipment up out of the way If you have got the ceiling height (of up to 12 feet 3.65 metres) and ceiling strength then this hoist will allow you to maximise space efficiency The two-rope pulley system will keep your bike level throughout the operation and reduces the effort required A locking clutch system and a wall-mounted tie-off cleat ensure that what goes up stays up Maximumrecommended weight is 50 lbs / 25 kg All fixing hardware is included and some DIY is required
A folding wall mounted rack for one bike. Mounts onto a wall and holds one bike in the horizontal position. Constructed from heavy duty steel with a tough black powder coated finish Folds flat when not in use for space efficiency A handy built in wire storage shelf keeps your equipment neat and tidy Foam covered arms hold and protect your bike Installed dimensions are 5.5 inches / 13.97 cm high 12.5 inches / 31.75 cm wide and 13.5 inches / 34.29 cm deep Maximum recommended weight of 50 lbs / 22.68 kg All fixing hardware is included and some simple DIY is required
A good looking freestanding bike rack that will carry two bikes as standard and which can be upgraded to carry four bikes Constructed from beautiful furniture grade American red Oak from sustainable sources with a hand-rubbed oil stain finish to show off the grain of the wood Stands 80 inches / 203.2 cm high with a compact footprint of 28 inches / 71 cm for width and depth Vinyl coated arms hold and protect your bike and can be adjusted independently to accommodate many shapes and sizes of frame The front wheel of your bike can be stabilised with the Velcro straps provided Extra bike kits are available A robust basket can be added complete with a pair of shoe hooks to keep your equipment neat and tidy Maximum recommended weight is 200 lbs / 90 kg All assembly hardware is included and some simple DIY is required
A good looking floor-to-ceiling bike rack that carries two bikes as standardCan be upgraded to carry four bikes; extra bikes kits are availableConstructed from beautiful furniture grade American red Oak from sustainable sources with a hand-rubbed oil stain finish to show off the grain of the woodMinimum ceiling height required is 7 feet / 2.13 metres and the maximum is 10 feet / 3 metres; assembled width is 14.5 inches / 37 cm and depth 9.5 inches 24 cmVinyl coated arms hold and protect your bike and are adjusted independently to fit many shapes and sizes of frameVelcro straps provided to stabilise the front wheel of your bikeHeld in place with a tension mounting system with a maximum recommended weight of 200 lbs / 90 kgsAll assembly hardware is included and some simple DIY is required
Finish Line Gear Floss is an advanced cleaning and detailing tool The microfiber rope is perfect for cleaning cassettes & hard-to-reach bike parts such as front chain rings derailleur pulley wheels hubs and spindles brake arms bottom bracket / crank interface and more Unlike other materials that simply move the dirt and grime around the microfiber technology of Gear Floss attracts and traps it inside its star-shaped grooves Gear Floss is highly tear-resistant and it is washable 20 Ropes per pack Each Rope is 20 in / 51cm