Pro Shift gear cable kit from Jagwire. Pro level polished cables and Slick-Lube liners increase precision and durability. A performance enhancement above standard OEM cables and housing.Key Features:STS-PS Pro Polished,Slick Stainless Inner Cables,LEX-SL Slick Lube Lined Outer CasingKit also includes:,2x 5G Tube Tops,2x Rotating Hooks,2x Cable Tips,6x Cable Donuts,2x Hooded End Caps,3x Sealed End Caps,6x Lines End Caps.
Featuring 2-Way release, the upper lever still performs the same shift function, but it can now swing in either direction allowing it to be released by the thumb or index finger. The raised optical gear display instantly shows you what gear you're in and allows clearance for suspension lock out clamps below.
Troy Lee Designs have collaberated with Australian artist Jamie Browne to create these limited edition race gloves created from Jamie's hand drawings. The Troy Lee Air Gloves give you dexterity and a perfect fit for warmer riding conditions. Robust, breathable and phone friendly, these are an indispensable, all purpose staple. Created and constructed in line with Troy Lee's drive to provide the very best kit available, the Air Gloves are contoured so as to give the perfect fit on the bike. Size Guide: Small = 6.5-7.5" (16.5cm-19cm) Medium = 7.5"-8.5" (19cm-21.5cm) Large = 8.5"-9.5" (21.5cm-24cm) X Large = 9.5"-10.5" (24cm-27cm) Measure circumfereance of the palm
Brand-X Ascend Lever Kit V2 - (1 x Gears) This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) Bar mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Campagnolo Ultrashift gear cable set employs stainless steel inner wires and friction-resistant housings that are lubricated with a special grease, ensuring lightning-fast gear changes and responsive braking control. Laboratory testing has shown that this solution provides unparalleled smoothness. Campagnolo cables maintain a constant friction value of 20-22 N at the most critical point, i.e. when the cable is actuated. A truly incredible value when one considers that some systems produced by other manufacturers exhibit values in the range of 130-140 N. Perfection is only achieved by paying attention to detail of which the Campagnolo cables are but one. All Campagnolo components are part of a unique integrated project. Every component is designed and realized to interact at one with the remaining components. The objective is to provide better-quality performance. On the contrary, precisely because these provide the link between one component and another, the cables must be designed to interface solely with the components they connect.
Troy Lee Designs have collaberated with Australian artist Jamie Browne to create these limited edition race gloves created from Jamie's hand drawings. The Troy Lee Air Gloves give you dexterity and a perfect fit for warmer riding conditions. Robust, breathable and phone friendly, these are an indispensable, all purpose staple. Created and constructed in line with Troy Lee's drive to provide the very best kit available, the Air Gloves are contoured so as to give the perfect fit on the bike. Size Guide: Small = 6.5-7.5" (16.5cm-19cm) Medium = 7.5"-8.5" (19cm-21.5cm) Large = 8.5"-9.5" (21.5cm-24cm) X Large = 9.5"-10.5" (24cm-27cm) Measure circumfereance of the palm
A tidy and efficient hoist that allows you to store bikes and other equipment up out of the wayIf you have got the ceiling height (of up to 12 feet 3.65 metres), and ceiling strength, then this hoist will allow you to maximise space efficiencyThe two-rope pulley system will keep your bike level throughout the operation, and reduces the effort requiredA locking clutch system and a wall-mounted tie-off cleat ensure that what goes up stays upMaximumrecommended weight is 50 lbs / 25 kgAll fixing hardware is included, and some DIY is required
Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
A tidy and efficient hoist that allows you to store bikes and other equipment up out of the way If you have got the ceiling height (of up to 12 feet 3.65 metres) and ceiling strength then this hoist will allow you to maximise space efficiency The two-rope pulley system will keep your bike level throughout the operation and reduces the effort required A locking clutch system and a wall-mounted tie-off cleat ensure that what goes up stays up Maximumrecommended weight is 50 lbs / 25 kg All fixing hardware is included and some DIY is required
Featuring a left side micro-indexed shifter and a right-side index/friction transferable shifter, this shifter set is compatible with double and triple chainsets and Shimano mountain bike (MTB) 10-Speed gear transmissions. Key Features: Bar-End Shifters for 2/3 x 10 Speed Left side: micro-index Right side: Index / Friction transferable Shimano MTB 10 Speed System compatible
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.
Clarks Gear Cable Outer Dispenser BoxClarks have been striving to deliver quality products for over 60 years now. The brand is dedicated to innovation in materials and design. Riders who use Clarks products have complete confidence in their brakes and steering grip - both of which are pivotal to high performance.Features: Cut and customise your own gear cable casing. Length: 30m P4 Type Compatible: Gear Buy Clarks Components from Chain Reaction Cycles, the World's Largest Online Bike Store.