The perfect companion for indoor and outdoor training, this innovative meter comes housed in a Shimano 105 R7000 crank arm and gives precision readings to within +/-1.5% in all conditions thanks to its IPX7 waterproof rating and Active Temperature Compensation Technology. Suitable for use with all Shimano Hollowtech II road drivetrains, the Stages Shimano 105 Power Meter uses ANT+ and Bluetooth connectivity to send your riding data right to your compatible device, letting you adapt your pedalling accordingly for the best possible performance. With over 200 hours of use from the included cell battery, easy installation and Tour de France-proven prowess, this is the ultimate power meter for the performance-focused rider.
Stages Cycling Power Meter L (105 R7000)Enabling you to add pedal power and cadence analysis to your bike without having to change your entire chainset, Stages Cycling brings you its highly accurate Power Meter L non-drive-side crank arm. A perfect choice for performance-seeking cyclists, this model is specifically designed for use with Shimano 105 R7000 chainsets, perfectly matching the aesthetics and colour of the original arm. Its advanced strain gauges are accurate to within +/- 1.5% and the arm can connect to compatible bike computers by ANT+ or Bluetooth wireless connection. This means you get instant feedback, so you can train to specific power zones.High-Performance Crank Arm Power Gauge Designed to make sure you get the most out of every ride, this convenient training accessory can be sued on both indoor and outdoor training sessions and is powered by a long-life CR2032 battery. With Tour de France-racing pedigree, it is a proven way to raise your riding to the next level. It can also be used in all weathers due to the IPX7 waterproof rating and Active Temperature Compensation technology.Features: Accuracy: +/- 1.5% accurate in all conditions Compatibility: Specifically for use with Shimano 105 R7000 crankset, Shimano Hollowtech II road bike drivetrains Power Range: 0 - 5000 Watts Cadence Range: 10-220 RPM Water Resistance Rating: IPX7 Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter Connectivity: ANT+, Bluetooth Power Meter Housing: Low profile design, with robust door interface Bottom Bracket Included: No Generation 3 model Single left-hand crank arm only (non-drive side) Active temperature compensation Accelerometer-based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level at start-up (with no need to connect to an app) and confirms successful zero reset Updated accelerometer and addition of gyroscope for improved cadence resolution Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Manufacturer's Part Number: R7000-L Weight: 15g (sensor only, approx.) Technologies:Active Temperature Compensation: Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditionsIndividual Meter Calibration: For the most accurate results, Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by Stages Cyling's systemBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bluegrass Legit Carbon HelmetRace-ready performance and lightweight mountain bike protection in perfect harmony, the Bluegrass Legit Carbon Helmet gives downhill and enduro certified protection for those of you who always ride hard. While you're in the flow of your mountain bike ride, it's a thrill. But when you're risking it all for some extra speed, seeking faster lines to shave off seconds, pushing grip and skill to the limits, a crash is always a possibility.However, developed for competition and the needs of mountain bikers who just never hold back, the Legit Carbon Helmet is a premium race-day full-face that gives the confidence to keep riding fast. Uncompromised ProtectionWhen your risk-taking doesn't pay off and you experience a crash and subsequent head impact, it's the EPS foam liner of the Legit Carbon that provides impact energy absorption. By soaking up damaging impact forces it ensures greater safety for your head.Meanwhile, the carbon-fibre outer shell adds structural strength without adding weight. It also fends off those less critical knocks and bumps you'll get when mountain biking. MIPS-C2® Brain Protection SystemThe Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Feature-Packed PerformanceBluegrass have not only delivered on safety but comfort is first-rate too. It begins with a total of 15 vents, ensuring airflow to the inside is optimised. Snap-in padding is soft and comfortable and it's washable too, letting you freshen up your Legit Carbon whenever it's needed.MX style claps and the double-D buckle provide a reliable and secure fit for every ride. Meanwhile, the anti-twist visor keeps off the sun, raindrops and roost and it's Goggle compatible too. It features a safety release system, lessening twisting forces on your neck when you do hit the dirt. For the gnarliest of trails when you want to increase your safety, you'll also be pleased to find the Legit is compatible with both neck braces and Inflatable emergency release systems. Features:Composite Carbon outer shell with EPS liner, in-mould polycarbonate shells and chin guard injected foam liningMIPS-E2® Brain Protection SystemAnti-twisting flexible visor and safety-release visor system15 VentsHand washable, snap-in padding and removable, hand washable straps coversMX style straps and Double-D BuckleDurable helmet case with a goggle pocketInflatable emergency release system compatibleNeck brace and goggle compatibleCE Certified - Weight: 1100g (Sizes XS - S - M) 1200g (Sizes L - XL)Shop all MIPS helmets - Click hereBuy Bluegrass Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bluegrass Legit Carbon HelmetRace-ready performance and lightweight mountain bike protection in perfect harmony, the Bluegrass Legit Carbon Helmet gives downhill and enduro certified protection for those of you who always ride hard. While you're in the flow of your mountain bike ride, it's a thrill. But when you're risking it all for some extra speed, seeking faster lines to shave off seconds, pushing grip and skill to the limits, a crash is always a possibility.However, developed for competition and the needs of mountain bikers who just never hold back, the Legit Carbon Helmet is a premium race-day full-face that gives the confidence to keep riding fast. Uncompromised ProtectionWhen your risk-taking doesn't pay off and you experience a crash and subsequent head impact, it's the EPS foam liner of the Legit Carbon that provides impact energy absorption. By soaking up damaging impact forces it ensures greater safety for your head.Meanwhile, the carbon-fibre outer shell adds structural strength without adding weight. It also fends off those less critical knocks and bumps you'll get when mountain biking. MIPS-C2® Brain Protection SystemThe Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Feature-Packed PerformanceBluegrass have not only delivered on safety but comfort is first-rate too. It begins with a total of 15 vents, ensuring airflow to the inside is optimised. Snap-in padding is soft and comfortable and it's washable too, letting you freshen up your Legit Carbon whenever it's needed.MX style claps and the double-D buckle provide a reliable and secure fit for every ride. Meanwhile, the anti-twist visor keeps off the sun, raindrops and roost and it's Goggle compatible too. It features a safety release system, lessening twisting forces on your neck when you do hit the dirt. For the gnarliest of trails when you want to increase your safety, you'll also be pleased to find the Legit is compatible with both neck braces and Inflatable emergency release systems. Features:Composite Carbon outer shell with EPS liner, in-mould polycarbonate shells and chin guard injected foam liningMIPS-E2® Brain Protection SystemAnti-twisting flexible visor and safety-release visor system15 VentsHand washable, snap-in padding and removable, hand washable straps coversMX style straps and Double-D BuckleDurable helmet case with a goggle pocketInflatable emergency release system compatibleNeck brace and goggle compatibleCE Certified - Weight: 1100g (Sizes XS - S - M) 1200g (Sizes L - XL)Shop all MIPS helmets - Click hereBuy Bluegrass Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
The R8+ LED light is Hope s most powerful light with a 4000 lumen (3000 measured) headlamp with an external 6 Cell Battery Pack for long burn time and plenty of light to shred the hardest MTB trails at night!Powerful 4000 lumen (3000 measured) headlamp unit and external battery LED light6 light levels allows riders to up power or increase burntimeSupplied with separate 6 cell ES (energy status) batteryBurntime 1 hour (4000 lumen mode)Includes 6 cell ES battery, bayonet handlebar mountWeight lamp: 180g, battery: 510gThe 8 powerful Cree LED s emit up to 4000 lumens of light for a burntime of up to 1 hour, while 6 settings allow you to tailor the amount of light to the conditions that lay ahead. The batteries ES (energy status) display and back lit power switch means you can easily keep track of what mode you are in and how much battery life you have left. Super powerful yet still lightweight and easy to use, the R8+ comes with bayonet handlebar mount fittings, so you can be ready to shred the trails in no time!
SRAM Red WiFLi 10sp Rear DerailleurThe SRAM RED Rear Derailleur has been designed to deliver the performance advantage you‘ve come to expect from SRAM. With WiFLi, the rear derailleur lengthens its cage and gets a slight variation in geometry to accommodate an 11-32 cassette.The new range of gears is wider than the standard triple chainring system and saves well over 250 grams.We‘ve paid rapt attention to the finer details, like adding a hollow titanium anchor bolt and even refining tooth geometry of the jockey wheel. The result is that the chain runs through the new RED Rear Derailleur smoother and quieter than ever before.AeroGlide Pulleys: New tooth pulley design with a sound damping effect for a super efficient and silent ride experience. Bottom and top pulleys benefit from this feature.Exact Actuation: When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.WiFLi™ = Wider - Faster - LighterSRAM's WiFLi™ Technology is based on the compact 2 x 10 - two front chainrings and 10 gears in the rear - design inherent in SRAM Apex and Rival, which delivers a wider range of gears than your standard triple, faster shifts through two chainrings and 10 gears, and with significant weight savings. It's the newest technology from the company that continues to innovate the cycling experience.Features:Wider – a wider range of gears for every climb and any descentFaster - two chainrings shift (and set-up) much faster and more easily than threeLighter – as much as 274g (9.8%) less than the most popular road tripleMuch improved Q-factor - improved heel clearanceEasier set up - two is easier than threeCompatible with SRAM Red, SRAM Force, SRAM Rival and SRAM ApexExact Actuation shifting provides fast, accurate shifts32T clearance thanks to the mid cage design: widest gear range availableNew silent shifting with optimized AeroGlide lower pulley, ceramic bearingsNew spring-fixed barrel adjusterNew chain pulley cage adds precise chain managementTitanium pinch bolt keeps a low profile while minimizing weightSpeeds: 10sMaterial: Carbon Inner Links, Carbon Cages, Aero Designed Titanium HardwareWeight: 167gCompatibility: 32T max cassettesCage Sizes: Mid cageBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
For the Ultimate, we held nothing back. Our engineers sculpted the finest materials - titanium and carbon fiber - to make this our lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalization is quick and intuitive. And for performance - well, our test riders didn't dub it the "Mini-Code" for nothing.FEATURESMore caliper stiffness and a new pad compound with bite.,Pivot bearings for crisp lever feel and a fatigue-free ride.,SRAM's best power to weight ratio in a four-piston brake..
SRAM have also paid attention to the finer details, like adding a hollow titanium anchor bolt and even refining tooth geometry of the jockey wheel. The result is that the chain runs through the new RED Rear Derailleur smoother and quieter than ever before.
The race-proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length ÔÇô the new transfer post is ready to rise to any occasion. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Kashima Coat Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
This stunning model features a hollow carbon crank arm construction which offers the ultimate strength to weight ratio for weaving from trail to trail. FSA has also completed this version with a UD carbon finish which adds another layer of protection and stiffness, making it ready to conquer everything a long day in the mountains has to offer.
The hubs feature high-quality contact seals and the legendary, highly adjustable Shimano cup and cone bearings that provide silky smooth rolling prowess and consistent performance. This wheel has been laced using high-end straight-pull, double-butted aero spokes for increased aerodynamics and dramatically increases stiffness and rigidity, which is very noticeable when sprinting and powering out the watts.
Shimano Ultegra RS700 C30 Road Front WheelThis clincher front wheel is tubeless ready and is a dependable performer. Featuring a smooth carbon surface mixed with a high-level alloy construction, this model is developed to provide exceptional efficiency, acceleration & stability. The hubs feature high-quality contact seals and the legendary, highly adjustable Shimano cup and cone bearings that provide silky smooth rolling prowess and consistent performance. This wheel has been laced using high-end straight-pull, double-butted aero spokes for increased aerodynamics and dramatically increases stiffness and rigidity, which is very noticeable when sprinting and powering out the watts.Features: Rim Material: Carbon, Aluminium Braking Surface Material: Aluminium Hub Material: Aluminium Spokes Material: Stainless Steel Freehub Body Material: Steel Use: Road Tyre Type: Clincher, Tubeless Ready Rim Profile: 28mm Rim Width: External: 20.8mm; Internal: 15mm Braking System: Rim brake Axle Compatibility: Quick Release Spoke Type: Straightpull, double butted, aero Spoke Count: 21 (crossed) Freehub: 10, 11 speed Single or Pair: Single front wheelA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, axle spec of either 9QR, 15x100mm, or 15x110mm, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.Key Features:New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm),New graphics are easy to read and make a fresh impact,Motion Control™ damping featuring low speed compression adjustment to lockout,Fit Tires up to 2.8" (15x110mm, without fenders; the use of a full fender will reduce tire clearance),Fast Black finished 32mm steel upper tubes couple stiffness with a premium look.Specifications:Model designator (SF): RL,Wheel size: 29",Travel (mm): 100mm, 120mm, 130mm,Damper Type: Motion Control,Fork offset: 51mm (29"),Maxle included: Maxle Stealth,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1.5" Tapered,Axle: 15x100mm,Axle to Crown (mm): 505, 529, 539,Brake type (FD): Disc,Crown Material: Forged, hollow aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 32mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, low speed comp to lock,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 755,Max Tire Width (mm): 62,Maximum Rotor Size: 220mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 53,Part Weight (g): 2058.
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, axle spec of either 9QR, 15x100mm, or 15x110mm, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.Key Features:New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm),New graphics are easy to read and make a fresh impact,Motion Control™ damping featuring low speed compression adjustment to lockout,Fit Tires up to 2.8" (15x110mm, without fenders; the use of a full fender will reduce tire clearance),Fast Black finished 32mm steel upper tubes couple stiffness with a premium look.Specifications:Model designator (SF): RL,Wheel size: 27.5",Travel (mm): 100mm, 120mm, 130,,,Damper Type: Motion Control,Fork offset: 42mm (27.5"),Maxle included: Maxle Stealth,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1.5" Tapered,Axle: 15x100mm,Axle to Crown (mm): 486, 506, 520,Brake type (FD): Disc,Crown Material: Forged, hollow aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 32mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, low speed comp to lock,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 710,Max Tire Width (mm): 62,Maximum Rotor Size: 220mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 53,Part Weight (g): 2038.
The name Crossmax has a long history in the world of XC riding and racing and this new wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile.The Infinity lighter hub design optimizes lateral stiffness and spokes tension. Our Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax is available with 6-bolt or center lock brake rotors in 29” and 27" and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves, replacement spokes and accessories.Key Benefits:Light and durable Welded rim construction for: a light and strong rim profile and a a perfectly sealed rimDynamic and agile24 double butted spokes Infinity hub platform ID360 double ratchet freewheel? systemTubeless ready technologyA tubeless rim profile and tubeless tape make it easy to ride tubeless tires for more comfort and control
Strong, reliable and tubeless ready, this modern XC wheel lives up to the legendary Crossmax name.Key Features:Efficient, strong and reliable XC performance.,New wider (25mm internal) sleeved rim design is lighter without compromising strength. 24 straight-pull spokes ensure optimum stiffness and reliability.,Smoother ride, increased traction and a reduced risk of punctures.,UST design and tubeless rim tape makes it easy to set up tubeless ready tires.,Trickle-down technology from high-end Mavic XC wheels.,Reliable ID 360 freehub system and lightweight rim design.,The name Crossmax has a long history in the world of XC riding and racing..This Tubeless Ready wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim design features a 25mm internal width with a hookless profile, a sensible setup for tubeless XC tires.The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by our new ID 360 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with included adapters.
The new Ksyrium 30 Disc is a perfect entry point into high-level race performance. This all-new UST Road Tubeless system delivers a smoother ride and improved puncture resistance while retaining a lightweight feel for climbing and accelerating.By removing the tube, we’ve also removed friction, so there’s less rolling resistance, which means it requires less energy to reach higher speeds.The 30mm deep rim optimizes aero performance and improves stability in crosswinds. The alloy rim benefits from our unrivaled experience creating light yet strong rim extrusions. We do this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness, strength and weight.The bladed straight pull spokes are laced to our high-end Infinity hub platforms : optimal spoke tension balance is a guarantee for perfect stiffness and great durability, with only 1 spokes length for both wheels to worry about.The Instant Drive 360 ratchet freewheel system is quick to engage and offers low friction.This hub easily converts from Shimano/SRAM to Campagnolo or XD cassette and is compatible with Center Lock disc rotors.Key Benefits:Light and aero rim?30mm deep profile Optimized rim wall thickness WeldedDynamic and agileDouble butted spokes Infinity hub design ID360 freewheel?Refined tubeless technology helps you roll faster and smoother and is easy to set up and maintain?Optimized UST rim bed shape Durable and perfectly airtight tape system
Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6” tires.Durability, serviceability, and value: every E-sync hub is built around these three priorities. From cromoly steel axles and double row Enduro bearings, to special heat treated steel ratchet rings and a pawl design that reduces stress on freehub and bearings, every detail of the E-sync hub is designed for durability. E-sync hubs are also designed for fast engagement, with four pawls needing only 8.18° of rotation to engage simultaneously and put power to the ground. E-sync hubs are perfect for eBikes and riders who demand stronger components, but still want the fast engagement of a high-performance hub.The Flow S2 wheelset is available with Shimano Micro Spline, HG, or SRAM XDR freehub, with options to fit all popular axle configurations.Tubeless ready with rim tape comes pre-installed. S2 wheels are built to last long, but also be easy to service and update with changing axle and cassette standards. Traditional J-bend spokes and lacing have a proven history of ride quality, durability, and serviceability, and matched S2 wheelsets all use a single spoke length, making it even easier to own and service your S2 wheelset for years. The Flow S2 with E-sync hub is the perfect wheelset for riders who value durability and tubeless performance.Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6 tiresLow-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6” tires,6061 aluminum with sleeved joint and stainless steel rim eyelets,Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal,Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability,E-sync hubs offer fast 8.18° engagement with reinforced pawls,Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs.
The ultimate solution for the harshest winter conditions. Assos' all-new Ultraz EVO is armed with an arsenal of our most protective NEOS textiles to keep your body as warm dry and shielded as possible in the most demanding weather. By strategically applying three “weights” of NEOS softshell textiles to the Ultraz we’ve ensured you get the right amount of protection where you need it while simultaneously maintaining breathability and increasing weight-savings throughout. The position our bodies take on the bike—combined with the intended riding conditions—inform these material selections knowing that deep-winter riding calls for absolute attention to detail in how your apparel fits and functions. OUT: 55%PA 23%EA 22%PL - IN: 85%PA 15%EA
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position.The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before.The bike may be the most sustainable transportation ever created, but we need to do more. The saddle’s carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we’re building a more sustainable carbon base.With the Power Pro’s titanium rails, Mirror technology is now more durable than ever. It’s so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It’s the perfect reflection of you.Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber.,Titanium rails.,SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.,Approximate weight: 245g (Size 143mm),Approximate weight: 251g (Size 155mm).