Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Key Features:Wheels machine built and hand finished in Barnoldswick,Built with Pro 4 32h hubs (J-bend only),Optimised rim profile suitable for 2.4” - 2.8” tyres,Tubeless compatible (requires tape and valves),Available in 26”, 27.5” and 29”,100m and 110mm Boost front wheel options available,135/142mm, 148mm Boost and 150mm rear wheel options available,Shimano Aluminium, Shimano Steel and Sram XD freehub body options available,.Specifications:Welded 6061 T6 Aluminium rim with eyelets,Black Sapim Race stainless steel double butted spokes built with silver brass nipples,Front wheels supplied with 15mm and 20mm conversions,Rear wheels supplied with 135 x QR and 142 x 12mm conversions,Boost 110mm & 148mm option built with Boost specific hub,Pro 4 32h hubs with stainless steel sealed cartridge bearings,4 Pawl ratchet system with 44 tooth engagement (8.2 deg),Hub available in Black, Silver, Blue, Orange, Purple and Red,Internal width: 30mm,External width: 35mm,Profile depth: 23mm,Rim ERD: 26” - 530mm/27.5” - 555mm/29” - 593mm,Recommended tyre width: 2.4” - 2.8”,Spoke count: 32,Rim only weight: 26” - 645g/27.5” - 675g/29” - 720g,Wheelset weight from: 26” - 2230g/27.5” - 2305g/29” - 2435g,.Image is for display purposes only
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
700C Front Road Wheel, Shimano 105 Hub on Mavic Open Pro rim, 32 Hole, Silver.Key Features:700C front road wheel,Mavic open pro rim silver,Shimano 105 QR hub,Silver double butted spokes,32 hole.
Key Features:Alex CX28 tubeless ready rims, 28mm deep section, 17mm internal width & 21.8mm external width. This added width accepts 25c tyres to perfection, which together will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – Non disc version. Q/R axle type. 2 sealed cartridge bearings.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,3 cross lacing pattern for increased durability.,Individual wheel weight 715g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Front 100 x 15mm axle, 2 sealed bearings, 32h.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Q/R axle conversion kit available - Part No. SJTRQRFKIT,26” wheel 830g / 27.5” wheel 864g / 29" wheel 876g.
Key Features:Our new Tubeless ready DH wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger,Chosen DH hub – Front 110 x 20mm axle, 2 sealed bearings, 32h. asymmetric hub flanges create an even stronger wheel.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Built in the UK by our skilled wheel technicians.,26” wheel 873g / 27.5” wheel 901g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Front 100 x 15mm axle, 2 sealed bearings, 32h.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Q/R axle conversion kit available - Part No. SJTRQRFKIT,26” wheel 830g / 27.5” wheel 864g / 29" wheel 876g.
Key Features:Our new Tubeless ready DH wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger,Chosen DH hub – Front 110 x 20mm axle, 2 sealed bearings, 32h. asymmetric hub flanges create an even stronger wheel.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Built in the UK by our skilled wheel technicians.,26” wheel 873g / 27.5” wheel 901g..
Key Features:Alex Draw 1.9s tubeless ready rims, 23mm deep section, 19mm internal width & 24mm external width. This added width will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – 6 bolt Disc version. 15mm thru axle type. 2 sealed cartridge bearings.,Q/R axle conversion kit available - Part No. SJCXQRFKIT,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,3 cross lacing pattern for increased durability.,Individual wheel weight 731g..
29" Pro build front wheel. Built using a Mavic TN119 rim, double butted black spokes and a Shimano M525 Deore 6 bolt disc hub. Supplied in a wheel box with PU rim tape.Key Features:Mavic TN119 double wall disc rim,Black double butted spokes,Shimano M525 Deore 6 bolt disc hub,Supplied in specific wheel box with PU rim tape.
Key Features:Alex CX28 tubeless ready rims, 28mm deep section, 17mm internal width & 21.8mm external width. This added width accepts 25c tyres to perfection, which together will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – Non disc version. Q/R axle type. 2 sealed cartridge bearings.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,Radial lacing pattern.,Individual wheel weight 715g..