After years of rider demands the Zenith was created and now has been upgraded to kick out 2100 lumens, with a long reaching, wider beam, for an hour or combined with TAP technology, the rapid mode change technology, the rider can use the 2100 lumens when plummeting down a steep, fast descent or tackling a technical trail and then TAP to lower the lumens when on the flat or a climb to increase the run time.Tap No button needed - TAP Quickly switch between modes on helmet lights by tapping either the body of the light or the helmet without needing to locate the function button for fast control to match the pace of the trail. Three sensitivities allow greater versatility.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.Fuel Gauge - Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime.In the box: Zenith MK2 GMB, Handlebar Bracket, Helmet Mount, Lanyard, Fast Charger, USB Charge Cable, QS Guide.Specification:LEDs: 3 x White XPL2(W3)IP Rating: IP65Max Lumens: 2100Battery: 5,000 mAh Li-IonRuntime: 1 -18 HoursCharging Time: 5 HoursWeight: 150gMaterial: Anodised 6063 AluminiumLength: 120mmHead Diameter: 41mm
The RS, Road Sport, AKTiv is the latest technology in the Exposure Lights Road range combined with the Road Specific Beam Pattern and an upgraded 1300; once AKTiv is selected the light will sense on coming light sources and auto dim when a vehicle is approaching, no button or thinking required. Also, with the specific bevels to allow side illumination, and reversible graphics to remind you that the Strada can be mounted either way up. There is also a remote switch included which allows the rider to take control if required.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.REAKT Intelligent lighting - Intelligently adapt to the surrounding ambient light conditions to maintain maximum contrast and visibility, for example brightening for street lit areas and moving into sunlight from shade.AKTIV - AKTIV is a technology that automatically dips the light when an approaching vehicles headlights are detected and returns to full beam once the vehicle has passed.Road Specific Beam - Taking its lead from car headlight technology, dual lenses deliver an optimum beam for road cycling with a flat beam for the periphery and a spot beam lighting the way ahead, which can by dipped for oncoming traffic with the included handlebar mounted, wired switch.Day Bright - Be Seen Be Safe - Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe.In the Box: Strada MK11 RS AKTIV GMB, QR Handlebar Bracket, Wired Remote Switch, Fast Charger, USB Charge Cable, QS GuideSpecification:LEDs: 2 x White XPL2(W3)IP Rating: IP65Max Lumens: 1300Battery: 6,800 mAh Li-IonRuntime: 2 - 36 HoursCharging Time: 6 HoursWeight: 199gMaterial: Anodised 6063 AluminiumLength: 102mmHead Diameter: 49mm
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb big impacts—from hard-hammering rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and Enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb huge any impacts from rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear hub features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing frames and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The SRAM RED® shift-brake controls feature a fresh new look and continue our philosophy of perfecting the interface between rider and bike. We have scrutinized everything, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The result is an extremely comfortable, highly individual fit that makes the shift-brake controls feel like a natural extension of the rider.ErgoFit™ textured body improves grip and finger wrap with reduced diameter, giving better control and a better transition to the bar,Individual Reach Adjust of brake and shift lever is easy to access and uses a standard hex key, putting the controls exactly where you want them,Larger carbon ErgoBlade™ lever improves shifting from the drops,DoubleTap© technology delivers both shifts from a single lever,ZeroLoss™ shifting means shifts engage immediately.
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you category leading Trail to Enduro good times with a 30mm wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.Rough And Rowdy - Made to handle all kinds of Enduro and all-mountain punishment, the burly, Aeffect R rim sports a 30mm inner width and is born tubeless ready.Balance is Key - Aeffect R sports a stout, 6069 alloy rim with a 4.5mm offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.No Frills, All Thrills - The new Trace hub doesn't need flash or gimmicks. Highlights include durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.SPECIFICATIONColour - Black.,Includes - 5 extra Spokes included with Rear Wheels.,Material - 6069 Aluminum.,Nipples - Black Brass Nipples.,Ext Rim Width (mm) - 34.,Int Rim Width (MM) - 30.,Spoke Butting - 2.0 / 1.7 / 2.0.,Spoke Count - 28.,Spoke Head Type - J-Bend.,Spoke Lacing - 3X.,Spoke Offset (MM) - 4.5.,Tubeless - Tubeless Ready.,Weight - 1920g (27.5"), 2000g (29").,Weight Conditions - Wheelset..
The DT Swiss ER 1600 700c Disc Brake Front Wheel is a heavy hitter, bike packers and wattage monsters assemble! With a 130 KG system weight limit the 32 mm deep ER 1600's are stiff, tough and ideal for anyone looking for a robust all round disc road wheelset at a reasonable price and weightThe ER 1600's premium SBWT welded rims are 20 mm wide internally, this makes them ideal for 25- 35 mm tyres and able to cover a huge variety of roles as required,Need something Racier? check out our Performance and Aero Road lines, building a mixed surface or dedicated off road machine? have a look at the Cyclocross friendly Cross Road or super wide Gravel series,DT's 350 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness,The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves,For those looking to use the latest tyre tech the ER 1600's come tubeless ready but can also be used with standard clinchers,These front wheels come ready for 12 x 100 mm but can be converted by changing the end caps (additional end caps not included),Maximum recommended system weight: 130 KG,Weight: Front 819 grams .
Hand built right here at Sourcebmx. This custom front BMX wheel uses the tried and tested Profile mini front hub laced into a BSD Aero Pro rim using high quality Double Butted Rainbow Oilslick Source spokes. NOTE: You can choose what type of female bolts you want in your hub at checkout or even upgrade to the titanium versions SPECS: Hub: Profile Mini Front Polished Axle: 10mm Female (Choose bolts at Checkout!) Rim: BSD Aero Pro Rim Black Spokes: Source Double Butted Rainbow Nipples: Source Brass Nipples Black Extras: Source Rim Tape
Mavic XA 35 Pro Carbon MTB Front Wheel (Boost)This trail-ready mountain bike (MTB) front wheel is kitted out with a 100% unidirectional carbon fibre rim, which offers a fantastic balance of stiffness, strength and low weight performance. Mavic has also equipped this model with 24 straight-pull, flat, double-butted steel spokes for additional durability and toughness as you conquer the most demanding of terrain conditions. Another highlight is this version's hookless, tubeless-ready rim profile that allows you to benefit from increased stability, comfort and less chances of flats or punctures on your ride. Coming complete with boost axle spacing for extra strength and 6-bolt disc brake compatibility for powerful and consistent braking performance, this front wheel is a great choice of upgrade for both trail riding and cross country (XC) racing.Features: Rim Material: 100% Unidirectional Carbon Fibre with hookless profile Use: Mountain Bike (MTB), Cross Country (XC) Axle Size: 15x110mm, Boost Internal Rim Width: 35mm ETRTO: 584x35TSS Drilling: Traditional Tubeless Ready: Yes Rim Profile: Hookless Tyre Compatibility: Hookless compatible UST Tubeless and tubetype Recommended Tyre Sizes: 65mm to 81mm (2.5" to 3.2") Valve Hole Diameter: 6.5mm Spoke Material: Steel Spoke Shape: Straight-pull, flat, double-butted Spoke Count: 24 Spoke Lacing: 2 cross Wheel Hub Body: Aluminium Axle Material: Aluminium Bearings: Adjustable sealed cartridge bearings (QRM+) Brake Compatibility: 6-bolt disc brake Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included ASTM Category 3: Cross country and trail riding Single or Pair: Single front wheel Weight: 758gManufacturer's Part Number: LF8326100 Black 27.5"Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss ER 1600 SP Front Road Disc Wheel (32mm)Built to be ridden hard and fast, this ER1600 front road wheel by DT Swiss uses its strong aluminium rim and sturdy profile to take you through every journey with pace and stability. Welded to maintain a robust shape when riding at top speeds, the rim gives a true and consistent roll over a range of road terrains. The 20mm rim width and the tubeless-ready profile ensure the wheel gives a streamlined and lightweight experience. Hard-Wearing and Fast-Rolling, Aluminium, Road Wheel This speedy road wheel is stiffened by DT Aero Comp Wide spokes which also improve the streamlined performance with every roll. The spokes come laced through a DT350 hub for a friction-free spin and provide excellent support to your road bike's front end. The spokes, hub and rim all combine to make this rigid and easy-to-handle wheel a must-have for the versatile road rider. The DT Swiss ER 1600 SP DB 32mm Front Wheel is rounded out with CenterLock disc brake optimisation, adding another layer of control and efficiency to this durable DT Swiss model. Features: Rim Material: Aluminium Rim Type: Clincher Internal Rim Width: 20mm External Rim Width: 24mm Rim Height: 32mm Spokes: DT Aero Comp Wide straightpull with DT ProLock Squorx ProHead aluminium nipples, 2-cross lacing Hub Type: DT350 Hub Axle Type: 100x12mm thru-axle Tubeless-Ready: Yes Brake Standard: CenterLock disc brake Recommended Maximum Weight: 130kg Includes: Tubeless tape 23mm, Tubeless valve MTB/road 40mm, IS 6-bolt adapter Road, 5mm endcap kit, 15mm endcap kit Weight: 819g Buy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Weighing just 426g this is one of the lightest and smallest headlamps of this calibre on the market. Power Modes Instead of the switching between different kinds of light modes the R4+ lets you easily set the level of battery you’d like to use with 6 different power options. The light comes with an illuminated power switch making choosing between the right modes even easier. Mounting The light comes with easy to install mounts including a quick bayonet fitting handlebar mount plus a helmet mount and a head harness.
Hope R4+ Vision LED Front Bike LightThe R4+ lamp is small enough to use as a head torch, yet still gives out 2000 (1500 measured) lumens for use on the most demanding rides.Features: Power output is 2000 lumens (measured 1500 lumens) 6 different power levels Includes quick bayonet fitting handlebar mount, helmet mount and head harness and 1m extension cable Backlit LED power button lets you know which power mode your using ES Li-Ion battery pack with built in power gauge 2.25 hours run time on full power (using the 4 cell battery) Improved LEDs Weight: 426g (R4+ Headlamp and 4 cell ES battery)Buy Hope Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.