Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reynolds Aero 65 Carbon Front Road WheelThis front road bike wheel features a carbon 19mm tubeless-ready rim and an i9 hub that lowers rolling resistance, enhances lateral stiffness and improves your overall ride. This also makes it an excellent choice of upgrade for riders who want a stronger and more dynamic front wheel, without adding any unnecessary grams to their road bike.- Industry leading aerodynamic performance and cross wind stability with the Dispersive Effect Termination (DET) rim profile- Wide, tubeless ready rim provides better fit for higher volume tires that increase grip, lower rolling resistance and provide greater comfort- Precision manufactured Reynolds hub by Industry Nine for quick engagement and efficient transfer of power- Premium Sapim CX-Ray bladed spokes offer ultimate performance in weight and ride quality paired with internal, alloy nipplesFeatures: Rim Material: Aero 65 Carbon Tubeless Disc Brake Use: Road Inner Rim Width: 19mm Outer Rim Width: 28mm Rim Depth: 65mm Spoke Count: 18 Spoke Pattern: Front: 2x; Rear: 2x Spoke Type: CX-Ray Nipple Material: Internal 5mm Hex Alloy Hub: i9 Engagement: 6 degrees Pawl: 3 Brake Compatibility: Rim brake Wheelset Size: 700c Tubeless Compatible: Yes Single or Pair: SingleBuy Reynolds Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reynolds Aero 80 Front Carbon Road WheelThis road bike front wheel features a carbon 19mm tubeless-ready rim and a precision-crafted Industry Nine hub that lowers rolling resistance, enhances lateral stiffness and improves your overall ride. This makes it an ideal upgrade for riders who want a stronger and more dynamic front wheel, without adding any unnecessary weight to your road bike.- Industry leading aerodynamic performance and cross wind stability with the Dispersive Effect Termination (DET) rim profile- Wide, tubeless ready rim provides better fit for higher volume tires that increase grip, lower rolling resistance and provide greater comfort- Precision manufactured Reynolds hub by Industry Nine for quick engagement and efficient transfer of power- Premium Sapim CX-Ray bladed spokes offer ultimate performance in weight and ride quality paired with internal, alloy nipples- Ctg2 brake track is 30% more resistant to heat than previous modelsFeatures: Rim Material: Aero 80 Carbon Tubeless Rim BrakeUse: RoadInner Rim Width: 19mmOuter Rim Width: 29mmRim Depth: 80mmSpoke Count: Front: 18, Rear: 18Spoke Pattern: Front: 2x; Rear: 2xSpoke Type: CX-RayNipple Material: AlloyHub: Reynolds / Industry NineEngagement: 6 degreesPawl: 3Brake Compatibility: Rim brakeWheelset Size: 700c Tubeless Compatible: Yes Single or Pair: SingleBuy Reynolds Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 303 S Carbon Disc Front Road WheelTaking its design from the higher-spec Firecrest 303 model, this front wheel is ideal for modern "go anywhere" road bikes. Zipp has also updated this model with a wider rim to improve rider comfort, handling and aerodynamics. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheel maintains its ideal-for-every-terrain 45mm rim depth. However, this model adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. Road bikes are more versatile than ever no matter the road surface, but just as fast as before. The 303 S offers an entirely new rim profile and design to optimise rider performance on this new breed of bike. This wheelset is tubeless compatible and designed for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the tarmac.45mm Deep Front WheelThe 303 S is among Zipp's lightest wheels, optimised for top aero performance with a 28mm tyre but capable of handling gravel tyres up to 50mm wide. The key innovation is in the 303 S's rim design. Its 45mm rim depth is the same as its predecessor, the 302 Disc brake. But its external rim width is 2mm wider, at 27mm, and its tyre bed is a full 7mm wider, at 23mm internal width. That rim platform is designed to be the fastest with a 28mm tyre. The wide rim optimises tyre profile to allow lower tyre pressure. That helps to reduce rolling resistance and provides a more compliant ride. The result of all this is a 10 watt savings vs. a top peer wheel in total power required to ride 40kph on a flat road with a 28mm tire, according to internal Zipp testing.This ground-breaking wheel also features all-new cosmetics, setting the rider apart from the pack, and comes at a very attractive price.Features: Rim Material: Carbon Fibre with updated Zipp graphics Brake Compatibility: Disc (centre lock) Rim Inside Width: 23mm Rim Profile: Symmetrical Rim Type: Clincher Rim Finish: UB Fibre / Bake-on Labels / Matte Clear Coat Spoke Type: CX-Sprint Spoke Count: 24 Spoke Pattern: 2-cross Nipple Material: Brass Axle Type: TA 12x100mm Bearing Type: Cartridge - Stainless Steel Driver Mechanism: 3 pawls leaf spring Tubeless Ready: Yes Hub: 76 DB hub with centre locking interfaceSingle or Pair: Single Weight: 711gBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward F6T Track Front WheelFast, agile and ultra-stable, the Fast Forward F6T Front Wheel is a track optimised wheel that features a 60mm-deep rim profile, uses tubular tyres and since it's intended for track use it has no braking surface. The combination of its full carbon rim, 60mm DARC-profile rim, tubular tyre compatibility and zero-braking surface provides this wheel with exceptional aerodynamic efficiency and control at a low weight. Hand built in The Netherlands, this artisan-built wheel is exceptionally stiff and responsive, giving the outstanding performance required for velodrome and track racing. World Class Quality Full Carbon Track WheelsSince no brake surface is required for track, the F6T UV protected decals are applied to the rim edge 24 front and 28 rear spokes on FFWD proven track hubs. Fast Forward's rim technologies and unique artisan wheel building techniques are market leading and World Tour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships.Features: 60mm Full Carbon Tubular Track Specific, no braking surface UV Protected Decals Use: Track Spoke Count: 24H Spokes: Sapim CX-Ray Bladed Spokes, Sapim Brass Nipples Hub: FFWD Track Rim Profile: FFWD DARC Rim Depth: 60mm Rim Material: Full Carbon Rim External Width: 22.4mm Recommended Tyre Widths: Minimum: 21mm; Maximum: 33mm Max Weight: 120kg 2 year warranty Hand built in Holland Weight: 785gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward F6T Track Front WheelFast, agile and ultra-stable, the Fast Forward F6T Front Wheel is a track optimised wheel that features a 60mm-deep rim profile, uses tubular tyres and since it's intended for track use it has no braking surface. The combination of its full carbon rim, 60mm DARC-profile rim, tubular tyre compatibility and zero-braking surface provides this wheel with exceptional aerodynamic efficiency and control at a low weight. Hand built in The Netherlands, this artisan-built wheel is exceptionally stiff and responsive, giving the outstanding performance required for velodrome and track racing. World Class Quality Full Carbon Track WheelsSince no brake surface is required for track, the F6T UV protected decals are applied to the rim edge 24 front and 28 rear spokes on FFWD proven track hubs. Fast Forward's rim technologies and unique artisan wheel building techniques are market leading and World Tour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships.Features: 60mm Full Carbon Tubular Track Specific, no braking surface UV Protected Decals Use: Track Spoke Count: 24H Spokes: Sapim CX-Ray Bladed Spokes, Sapim Brass Nipples Hub: FFWD Track Rim Profile: FFWD DARC Rim Depth: 60mm Rim Material: Full Carbon Rim External Width: 22.4mm Recommended Tyre Widths: Minimum: 21mm; Maximum: 33mm Max Weight: 120kg 2 year warranty Hand built in Holland Weight: 785gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward F9T Track Front WheelFast, agile and ultra-stable, the Fast Forward F9T Front Wheel is a track optimised wheel that features a 90mm-deep rim profile, uses tubular tyres and since it's intended for track use it has no braking surface. The combination of its full carbon rim, 90mm DARC-profile rim, tubular tyre compatibility and zero-braking surface provides this wheel with exceptional aerodynamic efficiency and control at a low weight. Hand built in The Netherlands, this artisan-built wheel is exceptionally stiff and responsive, giving the outstanding performance required for velodrome and track racing. World Class Quality Full Carbon Track Wheels Since no brake surface is required for track, the F9T UV protected decals are applied to the rim edge 24 front and 28 rear spokes on FFWD proven track hubs. Fast Forward's rim technologies and unique artisan wheel building techniques are market leading and World Tour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships. Features: 90mm Full Carbon Tubular Track Specific, no braking surface UV Protected Decals Use: Track Spoke Count: 28H Spokes: DT Aerolite and brass nipples Hub: FFWD Track Rim Profile: FFWD DARC Rim Depth: 90mm Rim Material: Superstiff High Tensile TC35 Carbon Rim External Width: 22.4mm Recommended Tyre Widths: Minimum: 21mm; Maximum: 33mm Max Weight: 120kg Track lockring included Hand built in Holland Weight: 1.97gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward F9T Track Front WheelFast, agile and ultra-stable, the Fast Forward F9T Front Wheel is a track optimised wheel that features a 90mm-deep rim profile, uses tubular tyres and since it's intended for track use it has no braking surface. The combination of its full carbon rim, 90mm DARC-profile rim, tubular tyre compatibility and zero-braking surface provides this wheel with exceptional aerodynamic efficiency and control at a low weight. Hand built in The Netherlands, this artisan-built wheel is exceptionally stiff and responsive, giving the outstanding performance required for velodrome and track racing. World Class Quality Full Carbon Track Wheels Since no brake surface is required for track, the F9T UV protected decals are applied to the rim edge 24 front and 28 rear spokes on FFWD proven track hubs. Fast Forward's rim technologies and unique artisan wheel building techniques are market leading and World Tour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships. Features: 90mm Full Carbon Tubular Track Specific, no braking surface UV Protected Decals Use: Track Spoke Count: 28H Spokes: DT Aerolite and brass nipples Hub: FFWD Track Rim Profile: FFWD DARC Rim Depth: 90mm Rim Material: Superstiff High Tensile TC35 Carbon Rim External Width: 22.4mm Recommended Tyre Widths: Minimum: 21mm; Maximum: 33mm Max Weight: 120kg Track lockring included Hand built in Holland Weight: 1.97gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward 5 Spoke 1k Tubular Track Front WheelThis tubular front wheel is equipped a five-spoke carbon NACA profile with bladed spokes and delivers incredible aerodynamic performance. It features a 1K carbon layup offering an even higher stiffness to weight ratio over prior versions while increasing the stiffness by 6%. In addition, the Five-T's closing system has been updated with in axle flush mount bolts making it even more stiff with increased durability.The Five-T is available with high-quality steel SKF bearings and can be paired with a rear DISC-T SL (sold separately) for an ultimate TT or mass start wheel set. Since no brake surface is required for track, the decals are applied to the rim edge and available in white or matte black color options.Fast Forward's rim technologies and unique artisan wheel building techniques are market-leading and WorldTour tested. FFWD Wheels are hand built in The Netherlands and have been ridden to victories in the Spring Classics, each Grand Tour and numerous World Championships.Features:Rim Material: CarbonUse: TrackExternal Rim Width: 23mmRim Depth: 55mmHub Option: FFWD TrackComponents: SKF bearingsSpoke Count: 5Tubeless Compatible: NoWheel Size: 700cCompatible Tyres: Min: 21mm, Max: 33mmWhat's Included: Five-T front wheel, Padded wheel bag and Valve extenderPart Number: Black: AF5SFCTSKFMBL; White: AF5SFCTSKFWHT Single or Pair: SingleMaximum Recommended Rider Weight: 265lbs/120kgWeight: +/- 5%: 875gBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward Disc 1k Tubular Track Front WheelThe Disk 1k Tubular Front Track Wheel from Fast Forward offers exceptional stiffness and stability while its lenticular rim shape provides outstanding aerodynamic efficiency. Ideal for track racing on the velodrome, this wheel has been aerodynamically optimised for the greatest agility and control while remaining stable and maintaining momentum. Plus, its lateral rigidity and low weight make it a top contender come race day. Features: Rim Width: 22.4mm Rim Material: 1K Carbon Brake Type: Track, no brake surface Tyre Type: Tubular Weight Limit: 100kg Max Tyre Pressure: 130 psi 3 Year Warranty Hand built in Holland Weight: 1.03kgBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.