Moon Rigel Pro Front Light The Rigel Pro provides a max output of 1000-lumens and up to 54:30-hours run-time when in Day Flash mode. This exceptional front cycle light is versatile for off-road cycling, adventure rides and daily commutes in low light conditions. Also, it features a heat sink cooling system, a stylish and durable CNC aluminium body and is IPX 7 water resistant while requiring only 3-hours to fully recharge. Plus, with its rotatable anti-dazzling lens it's ideal for urban cycling and can be mounted above or below your handlebar.Garmin Style Mount and IPX 7 Water ResistantThis powerful front cycle light features a Garmin style quick release handlebar mount that can be easily mounting above or beneath your handlebars. Plus, it's IPX 7 water resistant and it features a variable and easy to adjust lumen system. This light is an exceptional addition to any low light, night-time or wet weather cycling journey. Run Time: Mode Run Time (hours) Lumens M1 1:40 1000 M2 3:30 350 FL1 41:00 100 FL2 24:30 400 Day FL 54:30 400 SOS 28:30 - Features: LED: 2x 3535 20 Angle: Spot: 17°; Total: 84° Battery: 3.7V 2200mAh polymer Charging Time: 3 hours Size: 38 x 81 x 24mm Rotatable anti-dazzling lens - allows upside down mounting Intelligent Mode CNC Aluminium body Water Resistant IPX 7 Garmin Style quick release handlebar mount Overheat protection system Heat sink cooling system Mode status indicator Low battery indicator Precision Optical lens Automatic fully charged cut-off system Charging and fully charged indicator Mode memory Lock system Variable lumen systemBuy Moon Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Moon Rigel Pro front light has has an impressive max output of 1000 lumens, is water resistant and uses a USB-C cable for charging. A light for all seasons! Features 3 hours charging time Intelligent mode CNC aluminium alloy body Water resistant IPX 7 Garmin style Quick release handlebar mount USB Type-C Over heat protection system Heat sink cooling system Matrix LED display Low battery indicator Precision optical lens Automatic fully charged cut-off system Charging & fully charged indicator Mode memory Lock system Variable lumen system Rotatable Anti-Dazzling Lens - allows upside down mounting Runtimes Mode 1 - 1000lm - 1:30hr Mode 2 - 350lm - 3:30hr Flash 1 - 100lm - 41hr Flash 2 - 400lm - 24:30hr Day FL - 400lm - 54.30hr SOS - 28.30hr
Key Features:3 hours charging time,Intelligent mode,CNC aluminium alloy body,Water resistant IPX 7,GARMIN STYLE Quick release handlebar mount,USB Type-C remote control,Over heat protection system,Heat sink cooling system,Matrix LED display,Low battery indicator,Precision optical lens,Automatic fully charged cut-off system,Charging & fully charged indicator,Mode memory,Lock system,Variable lumen system,Rotatable Anti-Dazzling Lens - allows upside down mounting.Runtime:M1 - 1:30hr - 1000lm,M2 - 3:30hr - 350lm,FL1 - 41:00hr - 100lm,FL2 - 24:30hr - 400lm,Day FL - 54:30hr - 400lm,SOS - 28:30hr.
Features: 1 pc (15 chips) Round ring COB high brightness white LED CNC Aluminium heat sink casing Mode memory function Day Flash mode Auto safe mode 3 Steady modes and 4 flashing modes Rechargeable lithium polymer battery (3.7V 280mAh) Quick release universal bracket fits all bars and AERO style bars Low battery, charging and fully charged indicator Automatic fully charged cut-off system Side visibility Water resistant (IPX 4) Recharge time 2 hrs Contents: Ring-W RB-22 (Universal bracket) 2 O-rings for mounting: RS-G (fits 20-35mm diameters) RS-H (fits 35-52mm diameters) BK-21 (Belt clip) USB-MICRO (USB cable)
Better Boost Adapter KitsDesigned for:Converting compatible DT-Swiss 15x100mm hubs to 15x110mm Boost standardThe new Better Boost Adapter Kits allow you to keep your existing 15x100mm front wheel as you upgrade to a new Boost 15x110mm fork.What makes them better?There are other conversion kits on the market, but ours is the best. One competing kit consists of two loose 5mm axle spacers that are a pain to install and are easily lost during wheel removal. Another provides you with just one endcap and requires that you re-dish your wheel to re-center it in your fork. The Better Boost Adapter Kit consists of two precisely machined end caps and a rotor spacer (and requistite bolts), and it requires NO DISHING.What hubs are compatible?There are currently two Better Boost Adapter Kits available:Better Boost Adapter Kit for DT-Swiss 350 15x100mm 6-bolt front hubsBetter Boost Adapter Kit for DT-Swiss 240s "Fifteen" 15x100 6-bolt front hubsOther compatibility info:Better Boost adapter kits are not compatible with QR or 20mm hubs, nor are they compatible with those featuring a Shimano Centerlock brake mount. Kits are not suitable for use with Rock Shox RS-1. 185mm max rotor size.
Running a 1x drivetrain and have an unsightly, unused FD mount on your frame? Put it to use with the MRP Decapitator!Opens bottles with unparalleled precision,Made in Grand Junction, CO, USA,Alloy with matching alloy fastener,12g.
Tired of your front wheel hurling muck into your facewhilst bombing it down the trail? We’ve got the answer.Lightweight and stealthy, the Muc-Off Ride Guard keepsmud fling at a minimum. Key Features:Guards against mud,Looks awesome ,Made from 100% recycled plastic waste,100% recyclable ,Easy to fit ,Supplied with 4 zip ties ,Made in England.
Tired of your front wheel hurling muck into your face whilst bombing it down the trail Muc-off have got the answer. Lightweight and stealthy, the Muc-Off Ride Front Guard keeps mud fling at a minimum.Guards against mudFits almost all forksLooks awesomeMade from 100% recycled plastic waste100% recyclableEasy to fitSupplied with 4 zip tiesMade in England
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.Living in the land of muck, we have the perfect testing ground for designing and developing a high performing muck-muncher and it's fair to say we're pretty chuffed with the result... an award-winning, eco-savvy mudguard aka MugGuard.CompatibilityDesigned to fit 26-29 inch standard and boost suspension forks with tyres up to 3 inch wide.It can also be used as a rear mudguard on some frames but this is not guaranteed, so please get in touch if unsure.Design FeaturesForward lip to catch and minimise spray.,Sharp trailing edge to cut cloggy soil away from the tyre.,Recessed bridge area to increase tyre clearance.,Wide upper arm profile to protect your seals and stanchions.,Six fastenings, to anchor the guard firmly to the fork, so there is no rattling and minimal movement, even in the rockiest conditions.,Multiple fastening slots for increased functionality.,Supplied with re-useable Velcro for easy installation and quick-release.,Gloss underside finish to shed make and make for easy cleaning.,Finished in a stealthy matt black with contrasting gloss features, the MugGuard is a sleek looking piece of kit..MaterialEco! Eco! Eco! (Just in case you haven't got the brief yet) The MugGuard is made from recycled PP, which we've modified to increase performance and durability against the elements, and at the end of its life can be recycled... Reduce, Reuse, Recycle!SizeLength: Short -400mm / Long - 600mm,Width: 85mm,Weight: Short - 75g / Long - 105g.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Are you ready? The worlds fastest mudguard is evolving…The New Mudhugger EVO, designed with the help of DH World Cup and EWS racers.We’ve had the benefit of designing the new Mudhugger EVO around the the latest FOX 36 and 38’s and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost.Please note: For fitting to RockShox Zeb or Ohlins forks the Mudhugger Adapter Kit (Product ID: 234767) is also required. More clearance,Stiffer,Optimum length, not too short, no longer than needed.,Subtle kicker to keep length as short as possible without compromising spray protection.,Strong enough for DH racing at the highest level.,100% recycled PP.,Made and designed in the UK..
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.