The Megawatt Motor Bolt kit is to replace all six motor mounting bolts on the 2021-2022 Megawatt frames. The bolts are part 33 in the exploded diagram here.
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
This 290 to 297 MX Conversion Link enables you to convert your 290 Carbon Giga bike/frame to a mullet without the expense of a complete rear triangle. A mullet bike platform uses a 29" wheel at the front and a 27.5" at the rear, giving you the perfect balance of pace, stability, agility and control for riding anywhere on Earth. This kit turns your Giga 290 into a custom super-enduro mullet that ensures more front-end grip, enhanced rolling efficiency and playfulness on steep descents and technical terrain sections. This MX Horse Shoe Link includes everything you need* to convert a 290c Giga frame into a mullet bike, running a 29” front and 27.5” rear wheel. Forged from 6061 Aluminium Alloy with new bearings pre-installed and a tough anodised finish. No additional frame parts are needed to install the MX Horse Shoe Kit, it is a straight replacement for the current Horse Shoe. The MX Horse Shoe Link is an alternative option to the MX Carbon rear triangle, the MX Horse Shoe Link corrects the bike's geometry when a 27.5’’ wheel is installed to the 290 rear triangle. If you would like a complete conversion to a Giga MX 297 with a shorter chainstay and wheelbase, we would recommend the Giga Carbon 297 MX Kit. *Note: You will require a Boost 148mm 27.5” Rear wheel and tyre, not included. The Nukeproof GIGA: Gluttony is not a sin.
The carbon Reactor 290 frame is a trail-ready full suspension mountain bike (MTB) frame that is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, and traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate gives ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear Shock Debuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond’s difference between winning and learning. Tunability’s the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it’s up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame’s particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option) RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain traction
This super-enduro race frame offers the best balance of stiffness and strength at a low weight for intense trail riding performance. The ideal frame for enduro racing, epic all-mountain adventures and bike park sessions, this race-ready frame features modern enduro geometry with internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek finish. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium. Nukeproof's Ultimate Enduro Race Bike After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangle The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through a seat angle that is bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required. EXT STORIA LOK V3 Rear Shock The STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working. In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydraulic bottom-out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues. This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel. The STORIA V3 is also designed to serve riders who want the maximum performance of a pedal-platform equipped shock, with great support on the last millimetres of bike rear travel, with the great performance of a coil-over shock. EXT STORIA LOK V3 Rear Shock Sping "Weights" 400lbs - Small 425lbs - Medium 450lbs - Large 500lbs - X-Large 550lbs - XX-Large Features: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All Mountain Shock: EXT STORIA LOK V3 Coil 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option) EXT STORIA LOK V3 Rear Shock Benefits: Custom-tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology – Progressive opening – Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory-tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swap
The Giga 297 Carbon Push offers the best of both modern wheel sizes for an exceptional balance of super-enduro performance. Designed to offer exceptional rolling efficiency and all-terrain control with a 29" wheel at the front and a 27.5" wheel at the rear, this long-travel full suspension frame is fast, stable and playful for any terrain, anywhere on Earth. This variant is armed with a highly-adjustable 180mm rear travel Push Industries rear shock that features market-leading suspension technology and ultra-responsive compression and rebound damping. Intended for use with 180mm-travel suspension forks and is compatible with modern Boost wheels and drivetrain components, this frame also features internal dropper post cable routing and is compatible with 200mm disc brake rotors. GLUTTONY – HABITUAL GREED OR EXCESS. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, and enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless, and the result is that the Giga frame is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups. It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. Long Travel Full Suspension Super Enduro Frame The Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeonhole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest! Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. Adjustable Suspension Platform The suspension platform is based on the same horseshoe-driven linkage as our award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity; so, the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Stiff, Strong and Lightweight Carbon Construction The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. Long, Low and Slack Modern Enduro Geometry Available in Small to XXL for 27.5” wheels, Small to Large for MX wheels (Front 29”/Rear 27.5” wheel sizes) and Medium to XXL for 29” wheels, there is the perfect option for everyone. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. The frame geometry is Long, Low, Slack and Steep as it is based around our saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Integrated Rear Mud Guard and 2.6" Tyre Clearance The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.6” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chain stay protection. The Nukeproof GIGA: Gluttony is not a sin. You can find a document here that will help you get your Push Elevensix shock setup, and ready to ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 591mm Fork Offset: 42mm Rear Travel: 180mm Wheels Size: Front 29"/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x60mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Push Elevensix Rear Shock Benefits: Custom-tuned for Mega/Giga Patented Dual Overhead Compression Valve System with increased range Four-port symmetrical Progressive Damping Piston Independent Hydraulic Bottom Out Piston Motorsport grade spherical bearing eyelet mounts High-Volume Low-Pressure Reservoir System (90psi) 25 clicks of external low-speed compression adjustment 25 clicks of external high-speed compression adjustment 18 clicks of external low-speed rebound adjustment Ultralight Hybrid Hypercoil progressive spring system Engineered specifically for each bike’s unique suspension characteristic Individually dyno-tested Motorex 3D Response Technology Oil Manufactured and hand-assembled by PUSH Industries in Colorado Push Elevensix Rear Shock Spring "Weights" 450lbs - Small 475lbs - Medium 500lbs - Large 525lbs - X Large 550lbs - XX Large Specification: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, ISCG 05 mounts, Threaded 73mm BB Internally piped cable routing Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS Shock: Push Elevensix Trunnion mount, High-Volume Low-Pressure Reservoir System, external low-speed compression adjustment, external high-speed compression adjustment, external low-speed rebound adjustment, Ultralight Hybrid Hypercoil progressive spring system, Four-port symmetrical Progressive Damping Piston, Independent Hydraulic Bottom Out Piston Headset: Nukeproof, 44-56 IITS Accessories: Nukeproof Carbon Water Bottle Cage Weight: 3.88Kgs/8.55lbs (Tubeless)
The Giga 290 Carbon EXT features full-carbon front and rear triangles, has 170mm rear wheel travel and is compatible with long-travel 180mm suspension forks. Ideal for enduro racing, all-mountain adventures and hardcore trail riding, this frame features a robust, stiff and lightweight construction that's equipped with a highly tuneable and exceptional performing EXT Storia LOK V3 Coil rear shock. Plus, it's compatible with modern components and is designed with internal routing for a dropper seatpost. GLUTTONY – HABITUAL GREED OR EXCESS. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, and enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless, and the result is that the Giga frame is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups. It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. Long Travel Full Suspension Super Enduro Frame The Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeonhole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest! Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. Adjustable Suspension Platform The suspension platform is based on the same horseshoe-driven linkage as Nukeproof's award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity; so, the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Stiff, Strong and Lightweight Carbon Construction The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. Long, Low and Slack Modern Enduro Geometry Available in Small to XXL for 27.5” wheels, Small to Large for MX wheels (Front 29”/Rear 27.5” wheel sizes) and Medium to XXL for 29” wheels, there is the perfect option for everyone. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. The frame geometry is Long, Low, Slack and Steep as it is based around our saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Integrated Rear Mud Guard and 2.5" Tyre Clearance The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chain stay protection. EXT STORIA LOK V3 Rear Shock The STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working. In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydraulic bottom-out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues. This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel. The STORIA V3 is also designed to serve riders who want the maximum performance of a pedal-platform equipped shock, with great support on the last millimetres of bike rear travel, with the great performance of a coil-over shock. EXT STORIA LOK V3 Rear Shock Spring "Weights" 450lbs - Medium 500lbs - Large 550lbs - X-Large 600lbs - XX-Large The Nukeproof GIGA: Gluttony is not a sin. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 591mm Fork Offset: 42mm Rear Travel: 170mm Wheels Size: 29" Max Tyre Size: 2.5" Recommended Shock Sag (Measured seated): 30% Shock Size: 205x60mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS EXT STORIA LOK V3 Rear Shock Benefits: Custom-tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology – Progressive opening – Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory-tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swap Specification: Frame: Nukeproof Giga 290 Carbon, 170mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, ISCG 05 mounts, Threaded 73mm BB Internally piped cable routing Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS Shock: EXT Storia LOK V3 205X60 Trunnion Headset: Nukeproof, 44-56 IITS Accessories: Nukeproof Carbon Water Bottle Cage Weight: 3.88Kgs/8.55lbs (Tubeless)
The Mega 297 Carbon Fast is a carbon fibre enduro race frame equipped with a Fast Suspension Fenix EVO Enduro rear shock. This full-suspension enduro race frame offers the best of both modern wheel sizes for an outstanding balance of agility, control and efficiency with plush and responsive coil suspension performance. Ideal for speeding across unpredictable terrain, loose and wet conditions and steep technical climbs and descents, the Mega frame is designed with enduro-optimised race-ready geometry with improved suspension kinematics and internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek and stylish finish. The Nukeproof Mega has been Nukeproof's best-selling model for over 12 years. The Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series (EWS) titles to its name, the Nukeproof Mega has become an icon synonymous with enduro racing. Since 2009, the Nukeproof Mega has been in constant development to meet the demands of Nukeproof riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. Full Suspension Carbon Fibre Enduro Race Frame Engineered for optimised frame weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms help reduce the unsprung weight at the rear of the bike - this helps improve suspension performance. All forged parts are made from 6061-T6 aluminium. After winning four Enduro World Series Titles in three years, the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an efficient pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Key Features: All-new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All-new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangle The updated Mega frame geometry features a dynamic saddle offset for balanced seated rider weight distribution on each frame size. This dynamic saddle offset means that each frame size has a bespoke seat angle. In addition, the actual seat tube is shorter overall and offers a deeper maximum insert depth that allows a longer dropper post if required. Fast Suspension Fenix EVO Enduro Coil Rear Shock The Fenix was released in January 2019 and immediately proved its worth and performance by reaching the Enduro World Series podiums. The Fenix EVO stemmed from the idea of having a shock as efficient as a downhill shock with an integrated climb mode that stays independent from the other adjustments. Fast Suspension has kept all the strengths of the Fenix with the VDP piston that gives incomparable comfort and track feedback. The adjustable low-speed, medium speed compression and the dedicated high-speed piston. Fast focused their attention on the design of the EVO head for compatibility with more frame designs. And they also thought about making your life easier if you want to change your shock stroke without needing to open the shock thanks to the new spring retainer design. Click here for recommended base settings Fast Suspension Fenix EVO Enduro Rear Shock Benefits: Custom-tuned for Mega/Giga 100% CNC Integrated Climb Switch Alloy 7075 T6 made and anodized with a PTFE impregnation to reduce friction Monobloc Shaft + eyelet = stiffer and stronger A membrane is used to reduce friction and heat Viton Shaft seals for better heat resistance VDP piston = better traction control 3 independent compression circuits LS – MS – HS = perfect ground flattening Shock Weight without spring is 500g (230x65mm) Fast Suspension Fenix EVO Rear Shock Spring "Weights" 425lbs - Small 450lbs - Medium 475lbs - Large 500lbs - X Large 525lbs - XX Large Features: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All-Mountain, Trail Shock: Fast Suspension Fenix EVO Enduro Coil, Integrated Climb Switch, Alloy 7075 T6 made and anodized with a PTFE impregnation to reduce friction, 3 independent compression circuits LS – MS – HS = perfect ground flattening Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29"/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option)
With its carbon fibre construction equipped with a Push Industries Elevensix rear shock, the Mega 297 Carbon Push frame offers the best balance of stiffness, strength and low-weight performance for enduro racing and intense trail riding. Ideal for speeding across unpredictable terrain, loose and wet conditions and steep technical climbs and descents, trail-smoothing performance from the Elevensix rear shock offers increased tuneability, smoothness and control. Another highlight is its enduro-optimised race-ready geometry with improved suspension kinematics and internally piped cable routing, making it ideal for handling the demands of enduro racing while also providing a clean, sleek and stylish finish. The Nukeproof Mega has been Nukeproof's best-selling model for over 12 years. The Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series (EWS) titles to its name, the Nukeproof Mega has become an icon synonymous with enduro racing. Since 2009, the Nukeproof Mega has been in constant development to meet the demands of Nukeproof riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. Full Suspension Carbon Fibre Enduro Race Frame Engineered for optimised frame weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms help reduce the unsprung weight at the rear of the bike - this helps improve suspension performance. All forged parts are made from 6061-T6 aluminium. After winning four Enduro World Series Titles in three years, the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an efficient pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Key Features: All-new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All-new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangle The updated Mega frame geometry features dynamic saddle offset designed to optimise seated rider weight distribution on each frame size. This dynamic saddle offset means that each frame size has a bespoke seast angle. In addition, the actual seat tube is shorter overall and offers a deeper maximum insert depth that allows a longer dropper post if required. You can find a document here that will help you get your Push Elevensix shock setup, and ready to ride. Features: Material: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre Use: Enduro, All-Mountain, Trail Shock: Push Elevensix coil, High-Volume Low-Pressure Reservoir System, external low-speed compression adjustment, external high-speed compression adjustment, external low-speed rebound adjustment, Ultralight Hybrid Hypercoil progressive spring system, Four-port symmetrical Progressive Damping Piston, Independent Hydraulic Bottom Out Piston Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium option) Push Elevensix Rear Shock Benefits: Custom-tuned for Mega/Giga Patented Dual Overhead Compression Valve System with increased range Four-port symmetrical Progressive Damping Piston Independent Hydraulic Bottom Out Piston Motorsport grade spherical bearing eyelet mounts High-Volume Low-Pressure Reservoir System (90psi) 25 clicks of external low-speed compression adjustment 25 clicks of external high-speed compression adjustment 18 clicks of external low-speed rebound adjustment Ultralight Hybrid Hypercoil progressive spring system Engineered specifically for each bike’s unique suspension characteristic Individually dyno-tested Motorex 3D Response Technology Oil Manufactured and hand-assembled by PUSH Industries in Colorado Push Elevensix Rear Shock Spring "Weights" 425lbs - Small 450lbs - Medium 475lbs - Large 500lbs - X Large 525lbs - XX Large
The Giga 297 Carbon Fast is a full-carbon super enduro frame equipped with a Fast Suspension Fenix EVO Enduro rear shock - it offers the best of both modern wheel sizes for an exceptional balance of super-enduro performance with plush and responsive coil suspension performance. Designed to offer exceptional rolling efficiency and all-terrain control with a 29" wheel at the front and a 27.5" wheel at the rear, this long-travel full suspension frame is fast, stable and playful for any terrain. This frame is intended for use with 180mm-travel suspension forks and is compatible with modern Boost wheels and drivetrain components. And it also features internal dropper post cable routing and is compatible with 200mm disc brake rotors. Fast Suspension Fenix EVO Enduro Coil Rear Shock The Fenix was released in January 2019 and immediately proved its worth and performance by reaching the Enduro World Series podiums. The Fenix EVO stemmed from the idea of having a shock as efficient as a downhill shock with an integrated climb mode that stays independent from the other adjustments. Fast Suspension has kept all the strengths of the Fenix with the VDP piston which gives incomparable comfort and track feedback. The adjustable low speed, medium speed compression and the dedicated high-speed piston. Fast focused their attention on the design of the EVO head for greater compatibility with more frames. And they also thought about making your life easier if you want to change your shock stroke without needing to open the shock thanks to the new spring retainer design. GLUTTONY – HABITUAL GREED OR EXCESS. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, and enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless, and the result is that the Giga frame is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups. It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. Long Travel Full Suspension Super Enduro Frame The Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeonhole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest! Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. Adjustable Suspension Platform The suspension platform is based on the same horseshoe-driven linkage as our award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity; so, the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Stiff, Strong and Lightweight Carbon Construction The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. Long, Low and Slack Modern Enduro Geometry Available in Small to XXL for 27.5” wheels, Small to Large for MX wheels (Front 29”/Rear 27.5” wheel sizes) and Medium to XXL for 29” wheels, there is the perfect option for everyone. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. The frame geometry is Long, Low, Slack and Steep as it is based around our saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Integrated Rear Mud Guard and 2.6" Tyre Clearance The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.6” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chain stay protection. The Nukeproof GIGA: Gluttony is not a sin. Click here for recommended base settings Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 591mm Fork Offset: 42mm Rear Travel: 180mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x60mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Fast Suspension Fenix EVO Enduro Rear Shock Benefits: Custom-tuned for Mega/Giga 100% CNC Integrated Climb Switch Alloy 7075 T6 made and anodized with a PTFE impregnation to reduce friction Monobloc Shaft + eyelet = stiffer and stronger A membrane is used to reduce friction and heat Viton Shaft seals for better heat resistance VDP piston = better traction control 3 independent compression circuits LS – MS – HS = perfect ground flattening Shock Weight without spring is 500g (230x65mm) Fast Suspension Fenix EVO Rear Shock Spring "Weights" 450lbs - Small 475lbs - Medium 500lbs - Large 525lbs - X Large 550lbs - XX Large Specification: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, ISCG 05 mounts, Threaded 73mm BB Internally piped cable routing Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS Shock: Fast Suspension Fenix EVO Enduro Coil Trunnion Mount, Integrated Climb Switch, Alloy 7075 T6 made and anodized with a PTFE impregnation to reduce friction, 3 independent compression circuits LS – MS – HS = perfect ground flattening Headset: Nukeproof, 44-56 IITS Accessories: Nukeproof Carbon Water Bottle Cage Weight: 3.88Kgs/8.55lbs (Tubeless)
The Mega 290 Carbon EXT Shock frame features an ultra-strong carbon fibre construction that delivers maximum stiffness and strength, without adding any unnecessary excess grams to your ride. It is also equipped with an ultra-responsive EXT STORIA LOK V3 Coil rear shock that offers excellent rear wheel tracking and bump swallowing performance as you charge across rock gardens, tree roots and trail debris. Agile and responsive, this version benefits from race-ready geometry with internally piped cable routing, which provides smooth handling as well as a clean finish. Ideal for completing your enduro bike build, a final highlight is its 148x12mm Boost rear hub spacing that ensures strong and stiff control as you race for the podium. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009, the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. Race-Ready Carbon MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (front and rear triangle). The carbon swingarms help reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium. Nukeproof's Ultimate Enduro Race Bike After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other Key Features Include: All new UD Carbon chassis Improved suspension kinematics Tube-In-Tube design for easy cable installation All new geometry Optimised sizing/fit - Small to Large SRAM UDH Room for a 750ml water bottle inside the main front triangle EXT STORIA LOK V3 Coil Rear Shock The updated Mega frame geometry features a dynamic saddle offset that's designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles that are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth to allow for a longer dropper post if required. EXT STORIA LOK V3 Rear Shock The STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working. In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydraulic bottom-out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues. This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel. The STORIA V3 is also designed to serve riders who want the maximum performance of a pedal-platform equipped shock, with great support on the last millimetres of bike rear travel, with the great performance of a coil-over shock. EXT STORIA LOK V3 Rear Shock Spring "Weights" 425lbs - Medium 450lbs - Large 500lbs - X-Large 550lbs - XX-Large Features: Material: Nukeproof Mega V4 290 Carbon, 160mm Travel, ultra-strong T700/800 monocoque UD Carbon Fibre frame Use: Enduro, All Mountain, Trail Shock: EXT STORIA LOK V3 290 230X62.5 Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured Standing): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internally piped cable routing ISCG05 mount Enduro bearings Weight: 3.82Kgs/8.4lbs (Medium) EXT STORIA LOK V3 Rear Shock Benefits: Custom-tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology – Progressive opening – Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swap
The Giga 297 Carbon EXT is designed and engineered for use with a 29" wheel at the front and a 27.5" wheel at the rear, this long-travel full suspension frame is fast, stable and playful for any terrain, anywhere on Earth. Ideal for riding the most demanding and unpredictable terrains, this frame comes equipped with an ultra-responsive EXT STORIA LOK V3 that offers 180mm rear wheel travel and it is intended for use with a 180mm-travel suspension fork. It is also compatible with Boost wheels, and modern drivetrain components and features internal dropper post cable routing. GLUTTONY – HABITUAL GREED OR EXCESS. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, and enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless, and the result is that the Giga frame is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups. It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. Long Travel Full Suspension Super Enduro Frame The Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeonhole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest! Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. The suspension is designed to be super supple off the top, whilst being supportive in the mid stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. Adjustable Suspension Platform The suspension platform is based on the same horseshoe-driven linkage as our award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity; so, the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Stiff, Strong and Lightweight Carbon Construction The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. Long, Low and Slack Modern Enduro Geometry Available in Small to XXL for 27.5” wheels, Small to Large for MX wheels (Front 29”/Rear 27.5” wheel sizes) and Medium to XXL for 29” wheels, there is the perfect option for everyone. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. The frame geometry is Long, Low, Slack and Steep based on Nukeproof's saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Integrated Rear Mud Guard and 2.6" Tyre Clearance The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.6” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chain stay protection. EXT STORIA LOK V3 Rear Shock The STORIA LOK V3 offers the revolutionary LOK Technology that allows a complete compression separate lock-out system, now totally renewed with a new design, a more progressive opening, and a totally silent working. In order to allow every rider to use a softer spring rate and increase bike traction and handling, EXT engineers have imported from ARMA the hydraulic bottom-out system named HBC (Hydraulic Bottom-out Control), capable to develop more than 50% of hydraulic force only on the last part of the stroke, allowing riders to avoid any kind of bottom-out issues. This technology allows the use of thinner bottom-out bumpers, increasing the amount of useful travel. The STORIA V3 is also designed to serve riders who want the maximum performance of a pedal-platform equipped shock, with great support on the last millimetres of bike rear travel, with the great performance of a coil-over shock. EXT STORIA LOK V3 Rear Shock Spring "Weights" 400lbs - Small 450lbs - Medium 500lbs - Large 550lbs - X-Large 600lbs - XX-Large The Nukeproof GIGA: Gluttony is not a sin. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 591mm Fork Offset: 42mm Rear Travel: 180mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x65mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS EXT STORIA LOK V3 Rear Shock Benefits: Custom-tuned for Mega/Giga 4 way adjustable (LSC-HSC-LSR-Lok proprietary system High flow Ø29 mm main piston Ø24 mm valve piston Ø14 mm shaft New Lok Technology – Progressive opening – Silent working Engineered rebound circuit to separate bump and rebound oil flow Ultra low-friction coating Factory-tuned HBC technology Very low reservoir pressure for maximum sensitivity (55 PSI) No cavitation Very low hysteresis for high dynamic response High turbulent flow for very low temperature depending Low friction Energize seal Thinner bottom-out bumper New rebound knob for easy spring swap Specification: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, ISCG 05 mounts, Threaded 73mm BB Internally piped cable routing Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS Shock: EXT STORIA LOK V3 205X65 TRUNNION Headset: Nukeproof, 44-56 IITS Accessories: Nukeproof Carbon Water Bottle Cage Weight: 3.88Kgs/8.55lbs (Tubeless)