This trail-ready full suspension mountain bike (MTB) frame features an ultra-strong monocoque carbon fibre build, which makes it more than capable of handling all the demands associated with all-day epics on the trails. Nukeproof has also kitted out this model with a high-quality Factory Series Fox Float X rear shock that offers excellent smoothness, tuneability and control as you charge across tree roots, rock gardens and debris. Ready for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.6Kgs/7.9lbs (Medium option)
This mountain bike (MTB) frame is specifically designed for kid's and it features a tough aluminium build for a fantastic combination of strength, durability and performance. Nukeproof has also put this model through a hydroforming and triple-butting process for an extra level of resilience as your young rider perfects their skills. Another benefit is this model's comfortable kid's specific geometry and its internal routing that allows it to be used with a dropper seatpost. Coming complete with a Kevlar chainstay protector, 142x12mm rear hub spacing and a sleek design, this is a perfect upgrade for building confidence on the trails. 26" Kid's MTB Frame The Cub-Scout 26” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 26” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 120mm Axle to Crown: 514mm Fork Offset: 46mm Wheels Size: 26" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal routing for dropper seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.8kg Specification: Frame: Nukeproof Cub-Scout 26”, custom triple butted hydro-formed 6061 Alloy Internal routing for Dropper Seatpost Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44/56IITS
Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs
All set for day-long trail riding adventures, this mountain bike (MTB) frame is specifically designed for kid's who want to progress into the world of mountain bike riding. It features a high-quality 6061 triple-butted aluminium build, which makes this frame more than capable of handling all the knocks and bumps associated with your kid practising and perfecting their skill. With its comfortable geometry, 20" wheel size and Kevlar chainstay protector, this is a great choice of upgrade for building confidence, wherever their next ride takes them. 20" Kid's MTB Frame The Cub-Scout 20” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 80mm Axle to Crown: 385mm Fork Offset: 38mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / EX44/40 – B5 (For Tapered Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 1.8kg Specification: Frame: Nukeproof Cub-Scout 20”, custom triple butted hydro-formed 6061 Alloy Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44IETS
“It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. This full-suspension mountain bike (MTB) frame comes equipped with a robust 6061 aluminium construction that's been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you hit your favourite trails. Specifically developed for riders who want to complete their mullet bike setup, this model also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another benefit is its 157x12mm rear hub Boost axle spacing, which gives you stiff and responsive handling, wherever your next ride takes you. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Lightweight Full Suspension MTB Frame with 200mm Travel The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.06kgs/11.1lbs
Specifically engineered for kid's who want to dive into the world of mountain bike (MTB) riding, this trail-ready frame comes kitted out with a robust aluminium build for an excellent balance of strength, durability and performance. Nukeproof has also put this model through its hydroforming and triple-butting process, which makes it more than capable of handling the demands of learning to ride the trails. Another highlight is its comfortable kid's specific geometry and its internal routing that allows for a dropper seatpost to be used. This makes it a great choice for young riders who want to perfect their skills, wherever their next adventure leads them. Trail-Ready 24" Kid's MTB Frame The Cub-Scout 24” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44/56mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.7kg Specification: Frame: Nukeproof Cub-Scout 24”, custom triple butted hydro-formed 6061 Alloy Internal routing for Dropper Seatpost Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44/56IITS
Modern Hardtail Mountain Bike Frame with Updated Geometry The first choice for many, the Meta HT AM frame quite simply makes you want to ride. To stay ahead of the curve, Commencal looked at the little details that make the difference. On this updated version, the seat tube is lowered, which means it is now possible to install a longer travel seat post. Also, the choice of size is no longer restricted by a seat tube that's too high - this is particularly useful for those who want a longer bike. Compatible with 650b and 29er Wheels A semi-rigid frame allows more pedalling efficiency, has a lighter weight and it reduces essential maintenance. Also, the Commencal Meta HT AM Hardtail Frame facilitates both 27.5 and 29-inch wheels. The 27.5” (650b) wheels are recommended for small and medium-sized riders or those who prefer increased handling, comfort and grip, 29” wheels are recommended for medium and large-sized riders or for those who favour efficiency, precision and performance. Additional Features: Headset Size: ZS44/ZS56 (not included) Recommended Fork Travel: 160mm Recommended / Max. Fork Height: 552mm / 562mm Bottom Bracket Type: 68mm BSA threaded (not included) ISCG Tabs: No Seat Post Size: 31.6mm (not included) Seat Post Clamp: Single bolt, 34.9mm (not included) Disc Brake Standard: IS (International Standard) Rear Rotor Max Size: 200mm Rear Hub Compatibility: 12x148mm Maxle Standard Boost Warranty: 5 years frame, 6 months paint/decals Included: Meta AM HT frame, 12x148mm rear thru-axle, Chainstay protector, Seatstay protector
Genuine Vitus spare parts.
Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit - Small to Large · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
Whether you're shredding your favourite local trails with your riding buddies or attacking some technical routes on your own, this full suspension mountain bike (MTB) frame is engineered for performance. It features a robust 6061 aluminium frame construction that's been put through a hydroforming and triple-butting process to ensure maximum strength and durability as you conquer your way around the mountain. Nukeproof has also equipped this model with a dependable RockShox Super Deluxe Ultimate RCT rear shock for smooth and consistent rear end suspension performance, whatever the trail conditions. Coming complete with 148x12mm Boost rear hub spacing and internal cable routing, this is an ideal choice of upgrade for handling the demands modern MTB trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Triple-Butted Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.79Kgs/8.3lbs (Medium option)
If you have heard of Ragley, you already know the Blue Pig name. From the early days of the ‘hardcore hardtail’ it has pushed the geometry envelope and been loved by anyone who rides for all-out grin-inducing fun. The 2021 Blue Pig keeps the flame burning strong: Custom triple butted 4130 Chromoly (CrMo) tubing, ISCG 05 tabs, a 44mm head tube, internal dropper routing and a 148x12mm boost rear end. But it’s the geometry that defines it: the 63.75-degree head angle making its rowdy intentions abundantly clear. Comfortable enough to ride-all-day, tough enough for the bike park and flighty enough to speeder bike through the local woodland loam. The Blue Pig is built to take abuse and inspire confidence when things get gnarly, but it’s not been pillaging the trough; it’s light to ride and quite happy putting in the miles to get to the good stuff. If you don’t think a hardtail is capable, you’ve been riding the wrong bike… Features: 5 Year Warranty and lifetime crash replacement Material: 4130 Chromoly Steel ISCG 05 Tabs ISO 4210 Certified Head Angle: 63.75˚Static Effective Seat Angle: 74˚ Chainstay Length: 425mm Seatpost: 31.6mm Rear Axle: Ragley 12mm x 148mm Thru-Axle Seat Collar: 34.9mm BB Shell: 73mm BSA Headset: ZS44/28.6 EX44/40 Wheel Size: 27.5” Max Tyre Size: 2.6” BB Drop: -45mm Recommended Fork Travel: 150mm – 160mm Weight: Approximately 3.05kg
The Mmmbop is here for the fun times. Slack, aggressive and built to hang with any of your full-suspension riding mates. Perfect to ride all-day but drop the saddle and the magic happens. Using 6061 alloy tubing, the Mmmbop balances a stiff frame with enough compliance for the longest of days in the saddle. A 63.75-degree head angle inspires confidence on the steeps so whether you’re entering the hardtail category at an enduro race, exploring a backcountry epic or just smashing around the local woods, the Mmmbop is ready for anything. Features: 5 Year Warranty and lifetime crash replacement Material: 6061 Aluminium Alloy ISCG 05 Tabs ISO 4210 Certified Head Angle: 63.75˚Static Effective Seat Angle: 74˚ Chainstay Length: 425mm Seatpost: 31.6mm Rear Axle: Ragley 12mm x 148mm Thru-Axle Seat Collar: 34.9mm BB Shell: 73mm BSA Headset: ZS44/28.6 ZS56/40 Wheel Size: 27.5” Max Tyre Size: 2.6” BB Drop: -45mm Recommended Fork Travel: 150mm – 160mm Weight: Approximately 2.15kg