This model of the legendary Fox 36 receives an update in the form of a revised crown design that's engineered with more steerer tube overlap. This improves its durability and maintains stiffness while dropping 20 grams. Updated Crown Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the updated crown design improves durability while our engineering maintains stiffness and drops weight. Kabolt X Axle Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, it features a single-sided pinch bolt design. Lower Leg Bypass Channels Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Grip2 Damper Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
Ready for downhill domination, this excellent Diamond D1 version features an aluminium main build and magnesium-cast lowers, giving a reliable and robust performance on every adventure. Giving you six clicks of low-speed compression adjustment and 24 high-speed changes, fine-tuning the fork for your impending route is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.
These MTB forks feature a 32mm straight wall aluminium upper tube construction, which makes them perfect for use on XC bikes where every gram counts towards your winning score. Coming equipped with magnesium lower legs and a forged, hollow aluminium crown, these are an ideal upgrade for riders who want superior durability without any excess weight. One final highlight is their external rebound and 2 position compression adjustment, which allows you to ride in either an open or locked position. This makes it great for riders who want a front suspension setup that can be fine-tuned to match their riding style and the terrain conditions. 32mm chassis focused on light weight for the classic XC bike. DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Proven Charger RL damper provides smooth performance and a rock-solid lockout. Maxima Plush damping fluid reduces friction and silences damper noise. 29" wheel only. 100mm max travel.
X Fusion McQueen 34 HLR Boost ForksReady for fast and rebellious MTB rides, these stunning forks deliver awesome stiffness without adding any unnecessary weight to your ride. X-Fusion has kitted these out with an air spring which absorbs every sudden knock and jolt during your off-road pursuits. This means you can blast as hard as you want across the rock gardens, tree-roots and rowdy trails while maintaining your momentum. Adjustable MTB ForksWhether you're riding after work with your buddies or competing, these solid components provide maximum shock absorption on every daring run. Kitted out with a Roughcut HLR damper, you'll benefit from being able to easily adjust their high and low speed compression and rebound. This allows you to set them up to match your specific riding style and the terrain conditions for a more rider-tuned experience. Features:Material: AluminiumFinish: AnodisedUse: MTBOffset: 46mmAdjustments: High and low speed compression, rebound, air pressureDamper: Roughcut HLRSpring: AirTravel: 140mmAxle: 15x110mm, BoostWeight: 2.1kg (approx)Buy X Fusion Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z1 Boost Mountain Bike ForksEngineered for the most aggressive MTB (mountain bike) riders, the Bomber Z1 Boost Mountain Bike Fork is ready to tackle the toughest all-mountain (AM) and enduro routes. This adjustable MTB fork is tough and rigid thanks to its sold alloy composition. Marzocchi has also included black anodised stanchions to ensure you enjoy a smooth ride, whatever the terrain throws at you.MTB Fork with EVOL Air SpringReady to carve up the trails, this Boost-compatible fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This allows you to enjoy its smoother performance as you blast over the rock gardens, tree roots and debris at speed.Adjustable GRIP DamperKeeping your ride under control, this fantastic trail-ready fork is also kitted out with an adjustable GRIP damper. This cartridge style damper allows you to fine-tune its compression and rebound to maintain a consistent riding experience across unpredictable surfaces. Another benefit of the Marzocchi Bomber Z1 Boost Fork’s damper is its compression adjustment ranges from open to lockout. This allows you to ride in an open or locked position depending on the terrain.Features:Material: Alloy Spring: EVOL air spring Damper: GRIP Adjustments: Compression speed, rebound speed Lockout: Yes Axle: 15x110mm thru axle (Boost) Thru Axle Included: Yes Steerer Tube Size: Tapered 1.1/8" to 1.5" Stanchion Diameter: 36mm Use: All-Mountain (AM), Enduro Adjustable Travel: No Offset: Separate 44mm and 51mm optionsBuy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z1 Boost Mountain Bike ForksEngineered for the most aggressive MTB (mountain bike) riders, the Bomber Z1 Boost Mountain Bike Fork is ready to tackle the toughest all-mountain (AM) and enduro routes. This adjustable MTB fork is tough and rigid thanks to its sold alloy composition. Marzocchi has also included black anodised stanchions to ensure you enjoy a smooth ride, whatever the terrain throws at you.MTB Fork with EVOL Air SpringReady to carve up the trails, this Boost-compatible fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This allows you to enjoy its smoother performance as you blast over the rock gardens, tree roots and debris at speed.Adjustable GRIP DamperKeeping your ride under control, this fantastic trail-ready fork is also kitted out with an adjustable GRIP damper. This cartridge style damper allows you to fine-tune its compression and rebound to maintain a consistent riding experience across unpredictable surfaces. Another benefit of the Marzocchi Bomber Z1 Boost Fork’s damper is its compression adjustment ranges from open to lockout. This allows you to ride in an open or locked position depending on the terrain.Features:Material: Alloy Spring: EVOL air spring Damper: GRIP Adjustments: Compression speed, rebound speed Lockout: Yes Axle: 15x110mm thru axle (Boost) Thru Axle Included: Yes Steerer Tube Size: Tapered 1.1/8" to 1.5" Stanchion Diameter: 36mm Use: All-Mountain (AM), Enduro Adjustable Travel: No Offset: Separate 44mm and 51mm optionsBuy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox ZEB Ultimate Charger 2.1 RC2 ForksBuilt for Enduro performance, this MTB fork features 38mm aluminium upper tubes, magnesium lower legs and a forged, hollow aluminium crown for a perfect strength to weight ratio. RockShox has also kitted out this model with a highly-tuneable DebonAir air spring, which delivers an amazingly smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Coming trail-ready with RockShox's highest performing Charger technology, this model also uses its Charger 2.1 RC2 damper to give you independent high and low-speed compression with rebound adjustment. Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail.- 38mm chassis for increased stiffness and rider confidence- Highly-tuneable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain- RockShox's highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low-speed compression with rebound adjustment - designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel- Maxima Plush damping fluid reduces friction and silences damper noise- Short fender compatible (RockShox fender sold separately)Features: Upper Tube Material: 38mm Aluminium Crown Material: Forged, hollow AluminiumLower Leg Material: MagnesiumUse: MTB, EnduroSteerer: 1.5" taperedAxle: 15x110 BOOSTBrake Type: DiscSpring: DebonAir air springDamper: Charger 2.1 RC2Crown OD: 63mmMaxle Included: Maxle StealthWeight: 27.5": 2263; 29": 2298gBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox ZEB Ultimate Charger 2.1 RC2 ForksBuilt for Enduro performance, this MTB fork features 38mm aluminium upper tubes, magnesium lower legs and a forged, hollow aluminium crown for a perfect strength to weight ratio. RockShox has also kitted out this model with a highly-tuneable DebonAir air spring, which delivers an amazingly smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Coming trail-ready with RockShox's highest performing Charger technology, this model also uses its Charger 2.1 RC2 damper to give you independent high and low-speed compression with rebound adjustment. Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail.- 38mm chassis for increased stiffness and rider confidence- Highly-tuneable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain- RockShox's highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low-speed compression with rebound adjustment - designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel- Maxima Plush damping fluid reduces friction and silences damper noise- Short fender compatible (RockShox fender sold separately)Features: Upper Tube Material: 38mm Aluminium Crown Material: Forged, hollow AluminiumLower Leg Material: MagnesiumUse: MTB, EnduroSteerer: 1.5" taperedAxle: 15x110 BOOSTBrake Type: DiscSpring: DebonAir air springDamper: Charger 2.1 RC2Crown OD: 63mmMaxle Included: Maxle StealthWeight: 27.5": 2263; 29": 2298gBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Pike Ulitmate RC2 DebonAir Forks - BoostClassed as a true trail machine, these forks feature an updated DebonAir air spring that's paired with a Charger 2.1 RC2 damper. This means that you'll enjoy smooth and reliable shock absorption as you blast across rock gardens, tree roots and debris on your MTB adventures. RockShox has also added SKF wiper seals and Maxima Plush damping fluid to this model, which all work overtime to reduce friction, silence noise and provide lasting fork performance. Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain.Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail.Charger 2.1 RC2 damper option featuring independent high and low speed compression adjust.Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel.Maxima Plush damping fluid reduces friction and silences damper noise.Ultimate foil graphics package.Features: Upper Tube Type: 35mm tapered wall AluminiumLower Leg Material: MagnesiumCrown Material: Forged, hollow AluminiumBrake Type: DiscMaxle Included: Maxle StealthDamping Adjustments: Low speed and high speed compressionDamper Adjustment: Crown Axle: 15x110mm BOOST Spring: DebonAir Fork Offset: 37mm (27.5"), 42mm (29"), 46mm (27.5"), 51mm (29")Crown OD (mm): 58mm Damper: Charger 2.1 RC2 Steerer: 1.5" TaperedWeight: 1790 - 1858g depending on optionBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox ZEB Ultimate Charger 2.1 RC2 ForksBuilt for Enduro performance, this MTB fork features 38mm aluminium upper tubes, magnesium lower legs and a forged, hollow aluminium crown for a perfect strength to weight ratio. RockShox has also kitted out this model with a highly-tuneable DebonAir air spring, which delivers an amazingly smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Coming trail-ready with RockShox's highest performing Charger technology, this model also uses its Charger 2.1 RC2 damper to give you independent high and low-speed compression with rebound adjustment. Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail.- 38mm chassis for increased stiffness and rider confidence- Highly-tuneable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain- RockShox's highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low-speed compression with rebound adjustment - designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel- Maxima Plush damping fluid reduces friction and silences damper noise- Short fender compatible (RockShox fender sold separately)Features: Upper Tube Material: 38mm Aluminium Crown Material: Forged, hollow AluminiumLower Leg Material: MagnesiumUse: MTB, EnduroSteerer: 1.5" taperedAxle: 15x110 BOOSTBrake Type: DiscSpring: DebonAir air springDamper: Charger 2.1 RC2Crown OD: 63mmMaxle Included: Maxle StealthWeight: 27.5": 2263; 29": 2298gBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z1 Boost Mountain Bike ForksEngineered for the most aggressive MTB (mountain bike) riders, the Bomber Z1 Boost Mountain Bike Fork is ready to tackle the toughest all-mountain (AM) and enduro routes. This adjustable MTB fork is tough and rigid thanks to its sold alloy composition. Marzocchi has also included black anodised stanchions to ensure you enjoy a smooth ride, whatever the terrain throws at you.MTB Fork with EVOL Air SpringReady to carve up the trails, this Boost-compatible fork is equipped with an EVOL air spring. It works by increasing negative air spring volume to specifically provide optimum small bump sensitivity. This allows you to enjoy its smoother performance as you blast over the rock gardens, tree roots and debris at speed.Adjustable GRIP DamperKeeping your ride under control, this fantastic trail-ready fork is also kitted out with an adjustable GRIP damper. This cartridge style damper allows you to fine-tune its compression and rebound to maintain a consistent riding experience across unpredictable surfaces. Another benefit of the Marzocchi Bomber Z1 Boost Fork’s damper is its compression adjustment ranges from open to lockout. This allows you to ride in an open or locked position depending on the terrain.Features:Material: Alloy Spring: EVOL air spring Damper: GRIP Adjustments: Compression speed, rebound speed Lockout: Yes Axle: 15x110mm thru axle (Boost) Thru Axle Included: Yes Steerer Tube Size: Tapered 1.1/8" to 1.5" Stanchion Diameter: 36mm Use: All-Mountain (AM), Enduro Adjustable Travel: No Offset: Separate 44mm and 51mm optionsBuy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.