Fox Suspension 32 Float AX Factory Fit4 ForkPart of Fox Suspension's prestigious Factory Series, this gravel bike fork features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Benefitting from a lightweight Float EVOL air spring, it provides smooth and consistent front end suspension as it effortlessly soaks up knocks and bumps on your travels. Another highlight is its adjustable FIT4 damper that allows you to dial-in your favourite settings and enjoy a more rider-tuned experience, wherever your next adventure takes you. Coming complete with a choice of travel options to choose from as well as disc brake rotor compatibility from 160mm up to 180mm, this is a gravel fork that's engineered for exploring.Explore the Route Less TravelledWith a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 AX delivers just enough tuneable travel to take the edge off of wherever your gravel adventures may lead you.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions—Open, Medium, and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Gravel Axle Size: 12x100mm, Kabolt Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 Brake Rotor Compatibility: 160mm direct Post Mount, Up to 180mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. FIT4 Damper Adjustments: Three on-the-fly compression damping positions: Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks.Manufacturer's Part Numbers: 910-20-258 Black 700c 50mm Travel 910-20-256 Orange 700c 40mm TravelBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
All the revolutionary features of the brand-new 36 packaged in a super-stout chassis engineered specifically for modern hard-hitting, long travel Enduro-style riding. The all-new 38 is hungry to devour all you can throw at it and ask for more.All-NEW for 38, steerer tube design incorporates elliptical shaping in taper zone, further maximizing stiffness to weight ratio.NEW lower leg bleedersNEW air/oil channelsUnique design maximizes stiffness to weight and offers improved head tube clearance via radical NEW arch shape31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36Updated EVOL air spring58mm crown diameter to match modern frame shape profilesOptional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debrisSPECIFICATION:Damper: GRIPTravel: 170mmOffset: 44mmWheel Size: 27.5" & 29"Axle: 15QR x 110mm BoostSteerer: 1.5 TaperedColour: Matte BlackUpper leg finish: Black Anodised
Featuring the exact same 7000 series aluminium upper tubes as the Performance Elite series except with a GRIP2 damper, this suspension fork is specifically designed for the demands of E-MTB riding. E-Optimised, this model is fine-tuned to handle the increased torque levels and speed that's produced by electric mountain bike motor systems, so you can stay comfortable and in full control of your ride across unpredictable terrain conditions. Known by Fox Suspension has the all mountain (AM) champion, this updated 36 boasts a revised design that includes a new crown and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper The GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. Lower Leg Arch Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the 36 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. The updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Lower Leg Channels As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Floating Axle The 36 comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Manufacturer's Part Number: 910-21-104 Black 29" QR110 160mm 44mm
RockShox Pike Ultimate Charger 3 RC2 ForkCombining high-level damping, control and adjustability, this mountain bike (MTB) fork gives you a smoother and more refined experience as you hit the trails. Developed to be at home on any trail, this model is equipped with a 35mm chassis that's satisfyingly stiff, playful, and lightweight. Thanks to its high-quality tapered wall aluminium upper tubes and its forged, hollow aluminium crown, it provides the best balance of strength and durability, while also keeping the overall weight reduced to a minimum.Built for riders not looking to compromise on features or performance. Pike Ultimate has an updated 35mm chassis designed to be ultra-light in weight and playful in nature. Featuring the new Charger 3 RC2 damper with vibration killing ButterCup technology and all the support from the revised DebonAir+ air spring. With a new look and a long list of performance-enhancing technologies, the Pike Ultimate is here to revolutionise the trail game, again.Charger 3 RC2 Damper with ButterCupsCharger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This dead silent design allows the rider to truly tune to perfection with every click. This version also has ButterCups that block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.DebonAir+ Air Spring and Boost Axle SpacingDebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. This combined with this model's Boost axle spacing, makes the RockShox Pike Ultimate Charger 3 RC2 Fork fully prepared for day-long adventures on the trails.Features: Upper Tube Type Material: 35mm tapered wall Aluminium Crown Material: Forged, hollow Aluminium Use: Mountain Bike (MTB) Axle Size: 15x110mm, Boost Steerer Diameter: 1.5" tapered Fork Travel: 140mm Air Spring: DebonAir+ with ButterCups Damper Type: Charger 3 RC2 with ButterCups Damper Adjust: Crown Damping Adjustments: External begin stroke rebound, low speed compression, high speed compression Crown OD: 58mm Axle to Crown: 551mm Brake Type: Disc E-Bike Approved: Yes with E-MTB decal Lower Leg Type: Pressure Relief Valve Volume Reducer: 0/5 tokens Max Tyre Diameter: 770mm Max Tyre Width: 81mm Maximum Rotor Size: 220mm Minimum Rotor Size: 180mm Fender Compatibility: Short, 3 point mount Included: Bolt-on Fender, x2 bottom tokens, Star nut and Maxle StealthTechnologies: 35mm chassis at home on the trail - satisfyingly stiff, playful, and light, really light. ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk". Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This dead silent design allows the rider to truly tune to perfection with every click. DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible. Pressure Relief Valves eliminate unwanted air pressure build-up in the lower leg caused by variations in altitude or temperature. With the press of a button or two, Pressure Relief Valves restore premium fork feel. Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride. Bolt-in torque cap adapters are now included for use with standard hub end caps. Lightweight machined and anodized crown for premium looks and durability. Signature Series graphics package. RockShox premium short fender compatibility (RockShox bolt-on fender sold separately). Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Maxima Plush damping fluid reduces friction and silences damper noise.Manufacturer's Part Numbers: 00.4020.697.012 Silver 29" 140mm 00.4020.697.015 Black Gloss 29" 140mmBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The 34 Float Factory FIT4 fork from Fox Racing Shox is the hard charging do it all trail fork. Smoother, lighter, more tuneable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. All-New chassisNew air / oil channelsNew arch shape offers improved head tube clearance with shorter rakesNew 58mm diameter crownUpdated EVOL air springSpecification:Wheel Size: 29"Colours: Shiny Black / Shiny OrangeTravel: 130mmOffset: 44mmDamper: FIT4 3Pos-AdjustAxle to Crown: 554mm (140mm Travel)Max Tyre Size: 29 x 2.60"Rotor Size: 180-230mmSteer tube: 1.5 TaperAxle: Kabolt 110Upper tube Finish: KashimaStarting Weight: 1698g
All the revolutionary features of the brand-new 36 packaged in a super-stout chassis engineered specifically for modern hard-hitting, long travel enduro-style riding. The all-new 38 is hungry to devour all you can throw at it and ask for more. FEATURES All-NEW for 38, steerer tube design incorporates elliptical shaping in taper zone, further maximizing stiffness to weight ratio., NEW lower leg bleeders., NEW air/oil channels., Updated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuits., Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks., Unique design maximizes stiffness to weight and offers improved head tube clearance via radical NEW arch shape., 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36., Updated EVOL air spring., 58mm crown diameter to match modern frame shape profiles., Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris.. SPECIFICATION Damper: GRIP2 damper now with dual VVC (Variable Valve Control)., Travel: 170mm., Offset: 44mm, Wheel Size: 27.5" & 29"., Axle: 15QR x 110mm Boost., Steerer: 1.5 Tapered., Colour: Matte Black., Upper leg finish: Black Anodised..
Fox Suspension 38 Float Factory E-Tuned Grip 2 ForkContaining all the revolutionary features of the 36 model only packaged in a super-stout chassis, this electric mountain bike (E-MTB) suspension fork is specifically engineered for modern hard-hitting, long-travel enduro-style riding. Part of Fox Suspension's prestigious Factory Series, it comes race-ready with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Designed to exceed the demands of Factory-level riders, this model is also equipped with a lightweight Float EVOL air spring and a GRIP2 damper with Variable Valve Control (VVC) for a high level of tuneability and control. Coming complete with many of the brand's finest technologies, plus Boost axle spacing for increased stiffness and strength, this is a perfect upgrade for enduro riders who want to go big.E-MTB Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Electric Mount Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP2 with Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC); Low-speed compression; High-speed rebound (with VVC); Low-speed rebound Travel: 170mm Rake: 44mmTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 58mm crown diameter to match modern frame shape profiles. 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36. Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks.Manufacturer's Part Numbers: 910-21-033 Black 27.5" QR110 170mm 44mm 910-21-032 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This E-MTB suspension fork contains all the revolutionary features of the 36 model only packaged in a super-stout chassis that's specifically engineered for modern hard-hitting, long-travel enduro-style riding. Part of Fox Suspension's prestigious Factory Series, it comes race-ready with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Designed to exceed the demands of Factory-level riders, this model is also equipped with a lightweight Float EVOL air spring and a GRIP2 damper with Variable Valve Control (VVC) for a high level of tuneability and control. Coming complete with many of the brand's finest technologies, plus Boost axle spacing for increased stiffness and strength, this is a perfect upgrade for enduro riders who want to go big. E-MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 58mm crown diameter to match modern frame shape profiles. - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36. - Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Manufacturer's Part Numbers: 910-21-033 Black 27.5" QR110 170mm 44mm 910-21-032 Black 29" QR110 170mm 44mm
A striking balance of light weight and exceptional downhill performance, the new SID finds a new level of confidence and defines what modern XC race bikes are capable of. The new SID Ultimate is built with more travel, an all-new stiff 35mm chassis that features our lightest damper to date, the new Charger Race Day. This race-ready package also includes the redesigned DebonAir air spring, tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride, providing long lasting fork performance and improved overall suspension feel. Lighter and more capable than ever before, SID will get you to the finish line faster.Key Features:New 35mm chassis is the perfect blend of light weight and stiffness for the modern XC bike,New Charger Race Day Damper - our lightest production damper with rock-solid lockout,New DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control,New Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel,Maxima Plush damping fluid reduces friction and silences damper noise,29" wheel only,120mm max travel,Machined/anodized crown,2-bolt mounts to fit a short fender (RockShox fender sold separately),Signature SID Blue colorway and Ultimate High Gloss Black,Ultimate foil graphics package.Specifications:Model designator (SF): Ultimate,Wheel size: 29",Travel (mm): 120mm,Damper Type: Charger Race Day,Fork offset: 44mm (29"),Maxle included: Maxle Stealth,Colour (FS): SID Blue / Gloss Black,E-MTB Decal: No,Steerer: 1.5" Tapered,Axle: 15x110mm BOOST™,Axle to Crown (mm): 531,Brake type (FD): Disc,Crown Material: Forged, hollow aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 35mm tapered wall aluminum,Damper adjust: Remote (included),Damping adjustments: Extl rebnd, 2 pos remote comp (open/lock),Volume reducer: 0/3 Tokens,Spring: DebonAir,Spring rate: n/a,Max Tire Diameter (mm): 758,Max Tire Width (mm): 66,Maximum Rotor Size: 220mm,Minimum Rotor Size: 180mm,Fender Compatibility: Short, 2 point mount,Crown OD (mm): 58.
Coming equipped with three-position compression adjustment, rebound and air pressure adjust, this cross-country fork forges a new path for modern day racing forks. Fox Suspension has also kitted out this Factory Series model with a genuine Kashima coating, which delivers exceptionally smooth operation as well as a stunning finish. Item Top Features Continued: Travel: 120mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size Compatibility: Mutliple options available
This is Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork, until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger™ damper and specific Solo Air™ system designed for more bottom-out progression than you'll ever need, because your trails eventually require some landings.Key Features:New graphic package for a fresh, premium look,Proven Charger damper with specific Dirt Jumping/Slopestyle tune,Specific Solo Air top cap for extra bottom-out progression,Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference.Specifications:Model designator (SF): RC,Wheel size: 26",Travel (mm): 100mm, 120mm,Damper Type: n/a,Fork offset: 40mm (26"),Maxle included: Maxle Ultimate,Color (FS): Gloss Black,E-MTB Decal: n/a,Steerer: Tapered,Axle: 15x100mm,Axle to Crown (mm): 482, 522,Brake type (FD): Disc,Crown Material: Forged, hollow 7050 aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 35mm tapered wall aluminum,Damper adjust: Crown,Damping adjustments: Extl rebnd, low speed comp,Volume reducer: 0/2 Tokens,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 694,Max Tire Width (mm): 66,Maximum Rotor Size: 220mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 59,Part Weight (g): 1880.
MRP Ribbon Coil Mountain Bike ForkComing equipped with 35mm stanchions along with MRP's finest technologies, this trail-ready mountain bike (MTB) fork gives all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance.Enduro MTB Fork with Coil SpringThe Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil.Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have.Features: Stanchions: 35mm Use: All Mountain, Enduro Axle: 15x110mm Boost QR axle standard, Bolt-on optional (available separately) Steerer Diameter: 1 1/8-1.5" tapered Spring System: Coil Soft, medium & firm springs included External Adjustments: Preload, 8-position low-speed compression, 20-position Ramp Control, and rebound Brake Mount: 180mm, post mount Fork Travel/Offset: Multiple options available to select Axle to Crown Length: 27.5" Option with 150mm travel: 542mm; 27.5" Option with 160mm travel: 552mm; 27.5+/29" Option with 150mm travel: 562mm; 27.5+/29" Option with 160mm travel: 572mm Weight: 27.5" Option: 2.08kg; 27.5+/29" Option: 2.11kgTechnologies: ChocoLUXE Internals: ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It's highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They're exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control technology. New EssenTTial twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast arch design with forward-facing weight reliefs to mitigate mud build-up. PSST pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions.Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mmBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.