Fox Suspension 36 Float Perf E-Optimized Grip ForkThis electric mountain bike (E-MTB) suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.E-MTB Fork with FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (Three position on-the-fly adjustability) Travel: 160mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This MTB fork features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio. Item Top Features Continued: Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. Featuring a new design inside-and-out, this model is part of Fox Suspension's Performance Series and includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel. E-MTB Fork with FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-206 Black 29" QR110 160mm 51mm 910-20-205 Black 29" QR110 160mm 44mm
Race-ready, this fantastic Diamond D1 model boasts an aluminium main build and magnesium-cast lowers, giving a durable and dependable performance ride after ride. With six clicks of low-speed compression adjustment and 24 high-speed tweaks available, fine-tuning your suspension for the ride ahead is easily done, while Off The Top (OTT) adjustment to the negative spring enhances small bump sensitivity and stroke feel. With shim stack-controlled damping and a closed cartridge bladder system, customising the smoothness of each race through different configurations puts the rowdiness of your ride fully in your hands. An excellent choice for the enduro specialist.
RockShox Boxxer Select RC Boost ForksThe RockShox Boxxer Select RC Boost Forks are superb forks that are designed for freeriders and downhill (DH) racers - they offer phenomenal shock absorption, stability and control on every run, over mixed terrains, anywhere on Earth.The Boxxer Select RC forks feature a tough aluminium upper tube construction which makes them perfect for withstanding all the abuse that comes with blasting across the trails. RockShox has used magnesium for the lower tubes, so you'll benefit from maximum stiffness without any excess weight holding you back.DebonAir Downhill Race ForksReady to set you soaring down the slopes, these brilliant forks are equipped with a DebonAir spring for a plush and predictable riding experience. You'll notice when weaving from trail to trail how the connection between your bike and ther terrain becomes seamless as the spring absorbs every little impact. What's most impressive is you won't have to worry about feeling any harsh jolts on your body thanks to how smooth and soft this model performs.Sag GradientsEasy to set up and maintain, RockShox has installed sag gradients which are printed on these fork's upper tubes. This makes it incredibly simple to set the suspension to suit your riding preferences. Instead of wasting time with plastic clips and rulers to keep your suspension fine-tuned, you can now spend more time shredding the trails thanks to this model's fast and flawless customisation capabilities.Saving every dime for your bike park pass? Keep it in the bank, BoXXer Select is built on the same great chassis as BoXXer Ultimate and features the DH-specific DebonAir air spring. Race-proven Maxima Plush damping fluid and the Charger RC damper offer out of the box performance with Low Speed Compression and rebound adjustment.Features: Steerer: 1-1/8" Aluminium Axle: 20x110mm Boost Wheel Size: 27.5" Travel: 200mm Spring: Debonair Damper: Charger RC damper featuring low-speed compression adjust Fork Offset: 46mm (27.5") Upper Tube Type: 35mm Straight Wall Aluminium Crown Type: Short Crown Max Tyre Width: 81mm Maximum Rotor Size: 220mm Minimum Rotor Size: 200mm E-bike Approved: Yes Updated Maxima Plush damping fluid reduces friction and silences damper noise Updated graphics Highly tuneable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel Weight: 2.55 kg Technologies:Bottomless Tokens: Bottomless Tokens allow you to easily custom tune your air-spring performance to best match your riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail conditions and ensuring riders who are less front-end aggressive benefit from 100% of their fork’s travelDebonair: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Sag Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShoxBoost: BOOST is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheelsMaxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperaturesCharger RC Damper: Charger RC features an extruded bladder design that allows you to adjust low-speed compression anywhere from fully open to firmSKF Seals: Everyone loves a good collaboration, which is why RockShox has been working with SKF, the World's highest-performance seal manufacturer, for over 5 years. Together they provide ultra-low friction wiper seals, less fatigue, and unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in thereBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Expert Suspension ForkThis enduro suspesnion fork features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology, using the same chassis as Manitou's Mezzer Pro suspension fork. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market.Enduro Fork with Expert Air SpringExpert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke.Six Position Variable Terrain Tune (VTT) DamperAdjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions.Hexlock SL AxleManitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package.Features: Leg Material: 7000 Series Butted Wall Aluminium Crown Material: Forged Aluminium, Hollow Bore Leg Diameter: 37mm Use: Enduro Axle Size: 15x110mm Hexlock Steerer Diameter: 1 1/8-1.5" tapered Air Spring: Expert Air with Incremental Volume Adjust (IVA) Compression Damping: Six Position Variable Terrain Tune Rebound Damping: Open Cartridge adjustable TPC Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm with Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes, 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Weight: 2030g (27.5" Option); 2062g (29" Option)Technologies: 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals.Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Expert Suspension ForkThis enduro suspesnion fork features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology, using the same chassis as Manitou's Mezzer Pro suspension fork. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market.Enduro Fork with Expert Air SpringExpert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke.Six Position Variable Terrain Tune (VTT) DamperAdjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions.Hexlock SL AxleManitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package.Features: Leg Material: 7000 Series Butted Wall Aluminium Crown Material: Forged Aluminium, Hollow Bore Leg Diameter: 37mm Use: Enduro Axle Size: 15x110mm Hexlock Steerer Diameter: 1 1/8-1.5" tapered Air Spring: Expert Air with Incremental Volume Adjust (IVA) Compression Damping: Six Position Variable Terrain Tune Rebound Damping: Open Cartridge adjustable TPC Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm with Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes, 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Weight: 2030g (27.5" Option); 2062g (29" Option)Technologies: 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals.Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Diamond D1 Boost Fork 29" (44mm Offset)Made to help you to dominate every trail session and “own” the mountain, this daring Diamond D1 Boost Fork comes equipped with Boost-sizing and a robust aluminium construction for taking on enduro rides with fearlessness and control. Equipped with a huge 160mm of terrain-taming and impact-swallowing travel, this DVO 29er mountain bike (MTB) fork smooths out the harshest surfaces. Plus, its D1 damper offers you thirty clicks of high-speed compression adjustment, enabling you to carefully tune the fork to suit your riding style and how it reacts to the trail’s conditions.A High-Performance and Adjustable MTB Fork Kitted out with a closed bladder system and shim stack-controlled damping the Diamond D1 also features Off The Top (OTT) adjustments which help to improve sensitivity over small bumps and the feel of the stroke. A tapered steerer allows for precision handling when navigating trickier sections, while the Boost-sized axle gives a more rigid and responsive performance over gnarly runs with bigger wheels. This really is the perfect MTB fork for the daring enduro racer. Features: Stanchion Material: Aluminium, 35mm Crown Material: Forged Aluminium Lowers Material: Magnesium casting Steerer Tube Material: Aluminium Steerer Tube Size: 1 1/8 - 1.5", tapered Travel: 160mm Adjustable Travel: No Spring Type: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge D1 Damper system Adjustments: High-speed and low-speed compression, rebound speed, Of The Top (OTT), air pressure Axle Type: 15x110mm Boost thru-axle (thru-axle included) Use: All-Mountain (AM), Enduro Lockout: No Axle To Crown Length: 572mm (measurement at maximum travel) Offset: 44mm Disc Brake Caliper Mount: Post Mount Shim Stack Controlled Damping Wheel Size: 29" Hub Width Compatibility: 15x110mm (Boost) Weight: 2150g Technologies:Off The Top (OTT): DVO's industry exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stoke compromise. You really do get the best of both worldsBuy DVO Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Teamed with a new DebonAir+ spring and Charger RC Damper, the Lyrik is the most versatile fork around!All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Teamed with a new DebonAir+ spring and Charger RC Damper, the Lyrik is the most versatile fork around!All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Teamed with a new DebonAir+ spring and Charger RC Damper, the Lyrik is the most versatile fork around!All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!