Selle Italia FLITE Boost MVDP Carb Superflow SaddleFeaturing a high-quality fibra-tek cover, this Mathieu Van der Poel (MVDP) signature saddle is more than capable of handling all of the pressure and intensity associated with road racing and endurance riding. Selle Italia has also equipped it with carbon rails for a superior combination of stiffness, durability and low weight performance as you conquer every mile of road. Another highlight is it comes race-ready with a Superflow channel that runs down its middle section for relieving pressure from around your sit-bones and reducing numbness and fatigue. Weighing in at only 162g, this is a lightweight choice of upgrade for staying comfortable and supported without adding any unnecessary weight to your ride.A Never Ending TraditionThanks to the collaboration with an undisputed champion, like Mathieu Van der Poel, the tradition is continuing in the best way; and it is from this partnership that the Flite Boost Kit Carbonio Superflow “MVDP edition” is born.Dedicated LogoMade in white, like the Flite Boost usually used by Mathieu during the race, it features a logo with the word MVDP created “ad hoc” for the athlete.Features: Cover Material: Fibra-Tek Rails Material: Carbon rails (+10mm) Use: Road Dimensions: 145x250mm Category: Performance Profile: Flat Gender: Unisex Central Cut Out: Superflow channel id Match: L3 Weight: 162gManufacturer's Part Number: 017A920ICA007 White L3Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Mathieu Van der Poel (MVDP) signature saddle features a high-quality fibra-tek cover, which allows it to handle all of the pressure and intensity associated with road racing and endurance riding. Selle Italia has also equipped it with carbon rails for a superior combination of stiffness, durability and low weight performance as you conquer every mile of road. Another highlight is it comes race-ready with a Superflow channel that runs down its middle section for relieving pressure from around your sit-bones and reducing numbness and fatigue. Weighing in at only 162g, this is a lightweight choice of upgrade for staying comfortable and supported without adding any unnecessary weight to your ride. A Never Ending Tradition Thanks to the collaboration with an undisputed champion, like Mathieu Van der Poel, the tradition is continuing in the best way; and it is from this partnership that the Flite Boost Kit Carbonio Superflow “MVDP edition” is born. Dedicated Logo Made in white, like the Flite Boost usually used by Mathieu during the race, it features a logo with the word MVDP created “ad hoc” for the athlete. Manufacturer's Part Number: 017A920ICA007 White L3
Designed in collaboration with Dallara, this versatile saddle is engineered for the best balance of lightness, comfort and performance wherever your next ride takes you. It features a high-quality carbon design that includes a full carbon cover construction as well as hi-tech carbon rails. This combination ensures maximum stiffness and strength while also keeping its overall weight impressively low with the S3 option weighing only 90g and the L3 option weighing 100g. Multi-Discipline Saddle with Superflow Technology Whether you're clocking up the miles on an endurance ride, competing in a road racing event or exploring countryside back roads on your gravel bike, this saddle is developed for performance. Coming kitted out with Superflow technology, it uses its special central relief channel that runs down its middle section to relieve any pressure or fatigue from around your sit bones. As a result, you'll benefit from increased comfort and support, making it perfect for going the extra distance. Another highlight is this model's neutral shape that's ideal for riders with dynamic riding positions and those who like a more upright riding experience. Coming complete with a sleek, eye-catching finish, this is a great choice of upgrade for riding with speed, comfort and style. Technologies: Hi-Tech Carbon Rails: High modules carbon fibre weave, ø7x9mm. Superflow Channel: The SuperFlow technology drastically reduces all physical limitations caused by prolonged pressure in the perineal area. Neutral Shape: Neutral shape is recommended for individuals with both Anterior (Dynamic Rider) and Posterior (Static Rider) Pelvic Tilt. Manufacturer's Part Numbers: 041A922WCA001 Black L3 041A522WCA001 Black S3
Selle Italia SLR Boost Tekno Superflow SaddleEngineered for the best balance of lightness, comfort and performance, this versatile saddle well-equipped for road, gravel and endurance cycling. Designed in collaboration with Dallara, it features a high-quality carbon design that includes a full carbon cover construction as well as hi-tech carbon rails. This combination ensures maximum stiffness and strength while also keeping its overall weight impressively low with the S3 option weighing only 90g and the L3 option weighing 100g. Multi-Discipline Saddle with Superflow TechnologyWhether you're clocking up the miles on an endurance ride, competing in a road racing event or exploring countryside back roads on your gravel bike, this saddle is developed for performance. Coming kitted out with Superflow technology, it uses its special central relief channel that runs down its middle section to relieve any pressure or fatigue from around your sit bones. As a result, you'll benefit from increased comfort and support, making it perfect for going the extra distance. Another highlight is this model's neutral shape that's ideal for riders with dynamic riding positions and those who like a more upright riding experience. Coming complete with a sleek, eye-catching finish, this is a great choice of upgrade for riding with speed, comfort and style.Features: Cover Material: Full Carbon Rails Material: Hi-Tech Carbon rail Use: Road, Gravel and Endurance Dimensions: S3 Option: 130x248mm; L3 Option: 145x248mm Central Cut Out: Superflow channel Shape: Neutral shape idmatch: S3 and L3 options available to select Weight: S3 Option: 90g; L3 Option: 100gTechnologies: Hi-Tech Carbon Rails: High modules carbon fibre weave, ø7x9mm. Superflow Channel: The SuperFlow technology drastically reduces all physical limitations caused by prolonged pressure in the perineal area. Neutral Shape: Neutral shape is recommended for individuals with both Anterior (Dynamic Rider) and Posterior (Static Rider) Pelvic Tilt.Manufacturer's Part Numbers: 041A922WCA001 Black L3 041A522WCA001 Black S3Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Made with a proprietary, 3D printed pattern, the SLR Boost 3D Kit Carbon Superflow provides support on the toughest road rides helping you conquer the steepest of climbs and fastest descents. The differentiated cushioning zones give progressive absorption and Hi-Tech Carbon rails provide strength and ensure comfort on every pedal stroke. This high-tech road-specific saddle with Carbon DLS™ Technology is one of the most advanced on the market and is the perfect way to finish your dream build.SpecificationsSize: S3 130 x 248mm L3 145 x 248mm,Rail: Carbon + 10mm 07x9mm,Padding: 3D Printed,Intended use: Road Cycling,Shape: Neutral,Idmatch size: S3 / L3.
Selle Italia SLR Boost Tekno Superflow SaddleEngineered for the best balance of lightness, comfort and performance, this versatile saddle well-equipped for road, gravel and endurance cycling. Designed in collaboration with Dallara, it features a high-quality carbon design that includes a full carbon cover construction as well as hi-tech carbon rails. This combination ensures maximum stiffness and strength while also keeping its overall weight impressively low with the S3 option weighing only 90g and the L3 option weighing 100g. Multi-Discipline Saddle with Superflow TechnologyWhether you're clocking up the miles on an endurance ride, competing in a road racing event or exploring countryside back roads on your gravel bike, this saddle is developed for performance. Coming kitted out with Superflow technology, it uses its special central relief channel that runs down its middle section to relieve any pressure or fatigue from around your sit bones. As a result, you'll benefit from increased comfort and support, making it perfect for going the extra distance. Another highlight is this model's neutral shape that's ideal for riders with dynamic riding positions and those who like a more upright riding experience. Coming complete with a sleek, eye-catching finish, this is a great choice of upgrade for riding with speed, comfort and style.Features: Cover Material: Full Carbon Rails Material: Hi-Tech Carbon rail Use: Road, Gravel and Endurance Dimensions: S3 Option: 130x248mm; L3 Option: 145x248mm Central Cut Out: Superflow channel Shape: Neutral shape idmatch: S3 and L3 options available to select Weight: S3 Option: 90g; L3 Option: 100gTechnologies: Hi-Tech Carbon Rails: High modules carbon fibre weave, ø7x9mm. Superflow Channel: The SuperFlow technology drastically reduces all physical limitations caused by prolonged pressure in the perineal area. Neutral Shape: Neutral shape is recommended for individuals with both Anterior (Dynamic Rider) and Posterior (Static Rider) Pelvic Tilt.Manufacturer's Part Numbers: 041A922WCA001 Black L3 041A522WCA001 Black S3Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor INpower Flow MAS Power Meter CranksetSending pedal-by-pedal power measurements right to your ANT+-enabled head unit, this proficient power meter crankset from Rotor is an excellent addition to any training setup. Designed to measure power, cadence, TORQUE 360, OCA, torque effectiveness (left) and pedal smoothness, this innovative device gathers data seamlessly and almost invisibly, from within the crank axle. Waterproof and protected from riding impact, it works hard to give precise performance monitoring as you ready yourself for the race season. Innovative and Intuitive Power Measurement CranksetHolding its battery within the universal bottom bracket, the INpower Flow features MAS (Micro Adjust Spider) Technology, with various positions that can be customised to each rider's individual preference. Equipped with alternative bolt hole placement alongside the standard placement, it allows you to find positions between the optimum chainring position of the Q-Ring to suit your personal riding style. Keep on top of your outputs as you look to make gains with this fantastically efficient Rotor crankset. Features: Power Meter Type: ANT+ USB Axle Material: Aluminium Axle Size: 30mm with Universal Bottom Bracket Spider Type: Micro Adjust BCD: 110mm and 130mm BB Compatibility: Universal Battery: AA 1.5V (300 hours riding time) Data Transmitted: Power, Cadence, TORQUE 360, OCA, torque effectiveness (left) and pedal smoothness Software: ROTOR INpower user software, Trainingpeaks/ROTOR analysis Technologies MAS (Micro Adjust Spider) Technology: The new Micro Adjust Spider (MAS), offers more positions to suit every rider’s needs. Their new advanced MAS spider has an alternative bolt hole placement, as well as the standard bolt hole placement (see image below), allowing for intermediate positions between existing OCP (Optimum Chainring Position) of the Q-Ring. A standard crank in combination with the OCP of the Q-Rings, allows approximately 5 degrees of adjustment. The MAS spider when used with Q-Rings offers half positions giving approximately 2,5 degrees. This means that you can micro adjust the position of your Q rings, to suit your riding style. Integrated Electronics Inside: Electronics and battery are integrated inside the axle, making INpower shock and contaminant resistant, and waterproof with cleaner data transfer. Tool-Free Battery Replacement: INpower uses a standard AA battery that typically lasts 300 hours when fully charged. A rechargeable AA battery can also be used. Compatible with all ROTOR 30mm Cranks: INpower’s axle-based technology offers a wide range of cranks for both road and off-road riding. Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Rotor INpower Flow MAS power meter allows you to record your power readings via your ANT+ head unit. Inconspicuously integrated inside the crank axle, INpower is protected from shocks, crashes and outside contaminants plus it allows you to maintain your bike’s sleek, elegant aesthetics. The battery is also located within the bottom bracket spindle. Image shows a INpower left hand crankarm Sophisticated metrics interpret your data through user-friendly software and advise you when to turn up the pace, ease off the pedals, do another interval or call it a day. MAS (Micro Adjust Spider) Technology The new Micro Adjust Spider (MAS), offers more positions to suit every rider’s needs. Their new advanced MAS spider has an alternative bolt hole placement, as well as the standard bolt hole placement (see image below), allowing for intermediate positions between existing OCP (Optimum Chainring Position) of the Q-Ring. A standard crank in combination with the OCP of the Q-Rings, allows approximately 5 degrees of adjustment. Image shows a standard crankset with the MAS spider drilling The MAS spider when used with Q-Rings offers half positions giving approximately 2,5 degrees. This means that you can micro adjust the position of your Q rings, to suit your riding style. Integrated Electronics Inside Electronics and battery are integrated inside the axle, making INpower shock and contaminant resistant, and waterproof with cleaner data transfer. Tool-Free Battery Replacement INpower uses a standard AA battery that typically lasts 300 hours when fully charged. A rechargeable AA battery can also be used. Compatible with all ROTOR 30mm Cranks INpower’s axle-based technology offers a wide range of cranks for both road and off-road riding.
The Flow MK4 wheelset lets you do more. Since 2007, there s a reason the best riders in the world have come to us to ask for Flows. Corner harder, send it further, and carry more speed through any section of trail. Today s Flow MK4 gives you the control you need to push boundaries.Low-profile 30mm internal width optimises tyre shape, traction, and control for 2.3-2.6 tyresDurable 6069 aluminium with welded joint and reinforced spoke bedBST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel buildNew high-end premium hubMatched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceabilityConnection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choiceThe Flow MK4 rim s patented BST-Asymmetric shape creates the most reliable tubeless seal. The rim s durable 6069 alloy construction and reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride. Strength and serviceability are long-standing priorities of every Stan s wheel, and the Flow MK4 wheel takes those priorities further than ever before. The asym rim design allows for a single spoke length to be used on both the front and rear wheels. As with all Stan s wheels, traditional J-bend spokes and lacing are used for their proven strength, ride quality, and serviceability. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. Wide, light, strong, and tubeless, the original Flow redefined what a mountain bike rim could do. Today s Flow MK4 gives you the confidence to do even more.What s included: Flow MK4 wheels include pre-installed tape for tubeless use and presta valves.
The Flow MK4 wheelset lets you do more. Since 2007, there s a reason the best riders in the world have come to us to ask for Flows. Corner harder, send it further, and carry more speed through any section of trail. Today s Flow MK4 gives you the control you need to push boundaries.Low-profile 30mm internal width optimises tyre shape, traction, and control for 2.3-2.6 tyresDurable 6069 aluminium with welded joint and reinforced spoke bedBST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel buildNew high-end premium hubMatched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceabilityConnection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choiceThe Flow MK4 rim s patented BST-Asymmetric shape creates the most reliable tubeless seal. The rim s durable 6069 alloy construction and reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride. Strength and serviceability are long-standing priorities of every Stan s wheel, and the Flow MK4 wheel takes those priorities further than ever before. The asym rim design allows for a single spoke length to be used on both the front and rear wheels. As with all Stan s wheels, traditional J-bend spokes and lacing are used for their proven strength, ride quality, and serviceability. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. Wide, light, strong, and tubeless, the original Flow redefined what a mountain bike rim could do. Today s Flow MK4 gives you the confidence to do even more.What s included: Flow MK4 wheels include pre-installed tape for tubeless use and presta valves.
The Flow MK4 wheelset lets you do more. Since 2007, there s a reason the best riders in the world have come to us to ask for Flows. Corner harder, send it further, and carry more speed through any section of trail. Today s Flow MK4 gives you the control you need to push boundaries.Low-profile 30mm internal width optimises tyre shape, traction, and control for 2.3-2.6 tyresDurable 6069 aluminium with welded joint and reinforced spoke bedBST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel buildNew high-end premium hubMatched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceabilityConnection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choiceThe Flow MK4 rim s patented BST-Asymmetric shape creates the most reliable tubeless seal. The rim s durable 6069 alloy construction and reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride. Strength and serviceability are long-standing priorities of every Stan s wheel, and the Flow MK4 wheel takes those priorities further than ever before. The asym rim design allows for a single spoke length to be used on both the front and rear wheels. As with all Stan s wheels, traditional J-bend spokes and lacing are used for their proven strength, ride quality, and serviceability. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. Wide, light, strong, and tubeless, the original Flow redefined what a mountain bike rim could do. Today s Flow MK4 gives you the confidence to do even more.What s included: Flow MK4 wheels include pre-installed tape for tubeless use and presta valves.
The Flow MK4 wheelset lets you do more. Since 2007, there s a reason the best riders in the world have come to us to ask for Flows. Corner harder, send it further, and carry more speed through any section of trail. Today s Flow MK4 gives you the control you need to push boundaries.Low-profile 30mm internal width optimises tyre shape, traction, and control for 2.3-2.6 tyresDurable 6069 aluminium with welded joint and reinforced spoke bedBST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel buildNew high-end premium hubMatched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceabilityConnection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choiceThe Flow MK4 rim s patented BST-Asymmetric shape creates the most reliable tubeless seal. The rim s durable 6069 alloy construction and reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride. Strength and serviceability are long-standing priorities of every Stan s wheel, and the Flow MK4 wheel takes those priorities further than ever before. The asym rim design allows for a single spoke length to be used on both the front and rear wheels. As with all Stan s wheels, traditional J-bend spokes and lacing are used for their proven strength, ride quality, and serviceability. Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed. Wide, light, strong, and tubeless, the original Flow redefined what a mountain bike rim could do. Today s Flow MK4 gives you the confidence to do even more.What s included: Flow MK4 wheels include pre-installed tape for tubeless use and presta valves.